pcap files are broken at "_flipper_sd_serial" firmware

[RekordNadoev]

Hardware:
Flipper Zero dev-board (ESP32-S2) with *_flipper_sd_serial.bin firmware

Software:
Flipper Zero Marauder companion v0.6.2
Saving .pcap files to Flipper's SD-card.

Saved .pcap files are broken after "esp32_marauder_v0_10_8_20230621_flipper_sd_serial.bin" firmware.

Open with tcpdump v4.99.1: "tcpdump: unknown file format"
Open with wireshark v3.6.2: "The file "sniffpmkid_0.pcap" appears to be damaged or corrupt (commview: NCFX data negth 0 < 20)"
Open with aircrack-ng v1.7: "Unsupported file format (not a pcap or IVs file)."

Tried firmwares:
esp32_marauder_v0_10_8_20230621_flipper_sd_serial.bin - OK
esp32_marauder_v0_11_0_rc3_20230727_flipper_sd_serial.bin - .pcap is broken
esp32_marauder_v0_11_1_20230907_flipper_sd_serial.bin - .pcap is broken
esp32_marauder_v0_12_0_20230910_flipper_sd_serial.bin - .pcap is broken
esp32_marauder_v0_12_1_20231005_flipper_sd_serial.bin - .pcap is broken

To Reproduce
Steps to reproduce the behavior:

1. Get Flipper Zero with dev-board + ESP32 Marauder firmware
2. Run Apps => GPIO => [ESP32] WiFi Marauder
3. Set "Save to flipper sdcard" to "Yes" for logs and pcaps
4. Run Sniff => pmkid (or Sniff => raw) => get .pcap files saved to flipper's sdcard
5. Copy .pcap files to PC and try to open with wireshark/tcpdump/aircrack-ng
6. Get error messages. tcpdump: "tcpdump: unknown file format"; wireshark: "The file "sniffpmkid_0.pcap" appears to be damaged or corrupt (commview: NCFX data negth 0 < 20)"; aircrack-ng: "Unsupported file format (not a pcap or IVs file)."

Expected behavior
Steps 1-5 are the same.
6. .pcap files opening OK with wireshark/tcpdump/aircrack-ng.

Marauder (please complete the following information if applicable):

• Firmware version: 0_11_0_rc3 and later
• Hardware version: Flipper Zero dev-board (ESP32-S2)

Additional context
Last tried version with correct .pcap files was esp32_marauder_v0_10_8_20230621_flipper_sd_serial.bin

[thinkjk]

I'm having the same issues, I've tried a few fixes from reddit and none of worked. I'm using the official dev board.

I'm running the latest unleashed (63) and using FZEasyMarauderFlash (with option 2) to flash

[justcallmekoko]

Have you tried this with the non serial SD version of the firmware and saving directly to an SD card connected to the ESP32?

[RekordNadoev]

No unfortunately.
I've original FlipperZero dev-board with no SD only.
All i can tell: esp32_marauder_v0_10_8_20230621_flipper_sd_serial.bin does work, newer versions does not.

[RekordNadoev]

Found ESP32 Marauder v6 hardware with SD and checked:

• esp32_marauder_v0_11_1_20230907_new_hardware.bin
• esp32_marauder_v0_12_1_20231005_new_hardware.bin
  Both seemed to work correctly. aircrack-ng opened both of the .pcap dumps.

So the problem is in flipper_sd_serial after v0_10_8

What additional info should i provide to help debug?

[thinkjk]

ESP32 Marauder v6

I'm happy to help test on my dev board as well. and as @RekordNadoev mentioned there is no SD slot on the board by default.

[justcallmekoko]

I am currently working on a solution. The issue first appears in v0.11.0 and I've found it's cause. This will be fixed in v0.13.1

[RekordNadoev]

Thank you for great job!

[justcallmekoko]

All set
https://github.com/justcallmekoko/ESP32Marauder/releases/tag/v0.13.1

[thinkjk]

All set https://github.com/justcallmekoko/ESP32Marauder/releases/tag/v0.13.1

Confirmed it's working for me now. Thanks @justcallmekoko!

[Ralhazrolex]

updated to v0.13.1 and still pcaps are zero bytes, what could I be missing?