Wrong console text

[andimik]

When I specify -S then the text in the console is still your default value from the Netherlands.

dab-airspy-2 -C 10D -S 9201 -G 100

shows

going to start program Classic FM
selected Slo 1 Prvi      

So it also would help if -S is not specified to show an error message before the program starts (and not when Classic FM has not been found).

And slideshows are not shown, so you could remove the text going to show picture

[JvanKatwijk]

When i am back i will look at it. Which variant are you using? Op 5 nov. 2017 11:10 schreef "andimik" <notifications@github.com> het volgende:

…

When I specify -S then the text in the console is still your default value from the Netherlands. dab-airspy-2 -C 10D -S 9201 -G 100 shows going to start program Classic FM selected Slo 1 Prvi — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#16>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AITzwDgf-kTYm4c8VNX7ov7iAkdkg1Rnks5szYmTgaJpZM4QSUyA> .

[andimik]

It is example 2

[JvanKatwijk]

you could give it a try now 2017-11-08 1:44 GMT+01:00 andimik <notifications@github.com>:

…

It is example 2 — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#16 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AITzwNdcUTubFb6BrxWKWSFaP6OKRUVZks5s0PmAgaJpZM4QSUyA> .

-- Jan van Katwijk +31 (0)15 3698980 +31 (0) 628260355

[andimik]

Yes, confirmed. The text is now correct.

there might be a DAB signal here

we try to start program Slo 3 ARS
selected Slo 3 ARS
startaddress = 288
length = 96
subChId = 3
protection = 2
bitrate = 128

But it would also be useful to comment out in motdata.cpp, lines 240 and 241 as on the console there is no slideshow working ... ;-)

going to show picture

And: Could you filter DLs which is repeated, so that only one new DL line is being displayed (instead of continuously writing them)?

we have now DAB+
www.rtvslo.si/ars 
www.rtvslo.si/ars 
www.rtvslo.si/ars 
Radio Slovenija
Radio Slovenija
.
.
.
Radio Slovenija
Radio Slovenija
www.rtvslo.si/ars 
www.rtvslo.si/ars 

proposal:

we have now DAB+
www.rtvslo.si/ars 
Radio Slovenija
www.rtvslo.si/ars 

[JvanKatwijk]

your wish is my command 😁, i.e. I'll look into it forthcoming days 2017-11-08 20:36 GMT+01:00 andimik <notifications@github.com>:

…

Yes, confirmed. The text is now correct. there might be a DAB signal here we try to start program Slo 3 ARS selected Slo 3 ARS startaddress = 288 length = 96 subChId = 3 protection = 2 bitrate = 128 But it would also be useful to comment out in motdata.cpp, lines 240 and 241 as on the console there is no slideshow working ... ;-) going to show picture And: Could you filter DLs which is repeated, so that only one new DL line is being displayed (instead of continuously writing them)? we have now DAB+www.rtvslo.si/ars www.rtvslo.si/ars www.rtvslo.si/ars Radio Slovenija Radio Slovenija . . . Radio Slovenija Radio Slovenijawww.rtvslo.si/ars www.rtvslo.si/ars proposal: we have now DAB+www.rtvslo.si/ars Radio Slovenijawww.rtvslo.si/ars — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#16 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AITzwFYWDE80uibe6IL-Zgc7JufycBC2ks5s0gKfgaJpZM4QSUyA> .

-- Jan van Katwijk +31 (0)15 3698980 +31 (0) 628260355

[andimik]

And: What kind of format is written with the -O option?

Seems this is not wave, not aac, not eti.

[JvanKatwijk]

It is an unformatted stream of pcm samples (rate 48000). I vaguely remember that - at some point in time - I needed it. Using a "-" as filename causes the data to be sent to stdout 2017-11-08 20:40 GMT+01:00 andimik <notifications@github.com>:

…

And: What kind of format is written the -O option? Seems this is not wave, not aac, not eti. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#16 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AITzwE6sUjhr9-kboIuA5rn0-FhbHvjNks5s0gO-gaJpZM4QSUyA> .

-- Jan van Katwijk +31 (0)15 3698980 +31 (0) 628260355

[andimik]

Ok, I found it out.

signed 16bit PCM Little Endian
2 channels
48 kHz

Maybe you add that information into the README file

[JvanKatwijk]

seems to be addressed now. 2017-11-08 20:36 GMT+01:00 andimik <notifications@github.com>:

…

Yes, confirmed. The text is now correct. there might be a DAB signal here we try to start program Slo 3 ARS selected Slo 3 ARS startaddress = 288 length = 96 subChId = 3 protection = 2 bitrate = 128 But it would also be useful to comment out in motdata.cpp, lines 240 and 241 as on the console there is no slideshow working ... ;-) going to show picture And: Could you filter DLs which is repeated, so that only one new DL line is being displayed (instead of continuously writing them)? we have now DAB+www.rtvslo.si/ars www.rtvslo.si/ars www.rtvslo.si/ars Radio Slovenija Radio Slovenija . . . Radio Slovenija Radio Slovenijawww.rtvslo.si/ars www.rtvslo.si/ars proposal: we have now DAB+www.rtvslo.si/ars Radio Slovenijawww.rtvslo.si/ars — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#16 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AITzwFYWDE80uibe6IL-Zgc7JufycBC2ks5s0gKfgaJpZM4QSUyA> .

-- Jan van Katwijk +31 (0)15 3698980 +31 (0) 628260355