Skip to content

Latest commit

 

History

History
156 lines (122 loc) · 5.08 KB

ovs-offload.md

File metadata and controls

156 lines (122 loc) · 5.08 KB
Raw

OVS Hardware Offload

This provides an option to enable OVS hardware offload with ovs-cni while using OVS data-plane in Mellanox ConnectX-4 Lx onwards NIC hardware (Mellanox Embedded Switch or eSwitch). The OVS hardware offload is using SR-IOV technology with VF representor host net-device. The VF representor plays the same role as TAP devices in Para-Virtual (PV) setup. A packet sent through the VF representor on the host arrives to the VF, and a packet sent through the VF is received by its representor.

Prerequisites

Mellanox SR-IOV Configuation

In order to enable Open vSwitch hardware offloading, the following steps are required. Please make sure you have root privileges to run the commands below.

Check the Number of VF Supported on the NIC

cat /sys/class/net/snic0l/device/sriov_totalvfs
64
cat /sys/class/net/snic0r/device/sriov_totalvfs
64

Create the VFs after a reboot

echo 8 > /sys/class/net/snic0l/device/sriov_numvfs
echo 8 > /sys/class/net/snic0r/device/sriov_numvfs

Unbind the VF kernel drivers

dpdk-devbind -u 0000:18:00.2 0000:18:00.3 0000:18:00.4 0000:18:00.5 0000:18:00.6 0000:18:00.7 0000:18:01.0 0000:18:01.1
dpdk-devbind -u 0000:18:08.2 0000:18:08.3 0000:18:08.4 0000:18:08.5 0000:18:08.6 0000:18:08.7 0000:18:09.0 0000:18:09.1

Change the PFs to switchdev mode

echo switchdev > /sys/class/net/snic0l/compat/devlink/mode
echo switchdev > /sys/class/net/snic0r/compat/devlink/mode

Check that this created 16 representor devices

ip l | egrep -c "enp24s0f[01]_[0-7]"
16

Bind the VF kernel drivers again

dpdk-devbind -b mlx5_core 0000:18:00.2 0000:18:00.3 0000:18:00.4 0000:18:00.5 0000:18:00.6 0000:18:00.7 0000:18:01.0 0000:18:01.1
dpdk-devbind -b mlx5_core 0000:18:08.2 0000:18:08.3 0000:18:08.4 0000:18:08.5 0000:18:08.6 0000:18:08.7 0000:18:09.0 0000:18:09.1

Assign the representor MAC addresses to the VF MAC adresses

for i in `seq 0 7`; do mac=`ip l show smartvf0_$i | grep -o "link/ether [^ ]*" | cut -d' ' -f2`; echo "vf $i: $mac"; ip l set snic0l vf $i mac $mac; done
for i in `seq 0 7`; do j=$((i + 8)); mac=`ip l show smartvf0_$j | grep -o "link/ether [^ ]*" | cut -d' ' -f2`; echo "vf $i: $mac"; ip l set snic0r vf $i mac $mac; done

OVS bridge onfiguration

ovs-vsctl set Open_vSwitch . other_config:hw-offload=true
systemctl restart openvswitch
ovs-vsctl add-br br-snic0
ovs-vsctl add-port br-snic0 bond_snic0

For more information refer Mellanox doc

Device Plugin configuation

The device plugin would create the resouce pools based on the configurations given in the /etc/pcidp/config.json. This configuration file is in json format as shown below:

{
    "resourceList": [{
            "resourceName": "mellanox_snic0",
            "selectors": {
                "vendors": ["15b3"],
                "devices": ["1018"],
                "drivers": ["mlx5_core"],
                "pfNames": ["snic0l","snic0r"]
            }
        }
    ]
}

Deploy SR-IOV network device plugin as daemonset see device plugin

Network and POD configuation

After deploying multus, ovs-cni and network-resources-injector, Create a NetworkAttachementDefinition CRD object with the following config.

apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
  name: ovs-trunk-net
  annotations:
    k8s.v1.cni.cncf.io/resourceName: intel.com/mellanox_snic0
spec:
  config: '{
      "cniVersion": "0.4.0",
      "type": "ovs",
      "bridge": "br-snic0",
      "trunk": [ {"minID": 1050, "maxID": 1059} ]
    }'

Note: it is possible to omit bridge argument. Bridge will be automatically selected by the CNI plugin by following the chain: Virtual Function PCI address (injected by Multus to deviceID parameter) > Physical Function > Bond interface (optional, if Physical Function is part of a bond interface) > ovs bridge

Now deploy a pod with the following config to attach VF into container and its representor net device attached with ovs bridge br-snic0.

apiVersion: v1
kind: Pod
metadata:
  name: ovs-offload-pod
  annotations:
    k8s.v1.cni.cncf.io/networks: ovs-trunk-net
spec:
  containers:
  - name: ovs-offload-container
    command: ["/bin/bash", "-c"]
    args:
    - |
      while true; do sleep 1000; done
    image: registry.suse.com/suse/sle15:15.1

The network-resources-injector webhook parses k8s.v1.cni.cncf.io/networks annotation to retrieve appropriate resource name from its NetworkAttachementDefinition CRD object and then included in requests/limits of pod specification.

The device plugin allocates the requested device into pod container and multus cni plugin forwards the device's pci address into ovs-cni through deviceID parameter.