ACD-ALARM-MIB.mib

--
-- Accedian Enterprise Specific MIB: Structure of Management Information
--
-- Copyright (c) 2005-2011, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


ACD-ALARM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Unsigned32
        FROM SNMPv2-SMI
    DisplayString, TruthValue, DateAndTime
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    sysName
        FROM SNMPv2-MIB
    acdMibs
        FROM ACCEDIAN-SMI;

acdAlarm MODULE-IDENTITY

    LAST-UPDATED "201110100100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             2351 Alfred-Nobel blvd., Suite N-410
             Saint-Laurent, Quebec Canada H4S 2A9
             E-mail: support@accedian.com"
    DESCRIPTION
            "The alarm Table for this Accedian Networks device."

    REVISION "201110100100Z"        -- 10 October 2011
    DESCRIPTION
            "Add acdAlarmCfgTableLastChangeTid and
             acdAlarmStatusTableLastChangeTid."

    REVISION "201011100100Z"        -- 10 November 2010
    DESCRIPTION
            "Fix compliance section."

    REVISION "200902040100Z"        -- 4 Feb 2009
    DESCRIPTION
            "Add new fields in acdAlarmCfgEntry, acdAlarmActiveState and
             acdAlarmClearState."

    REVISION "200802010100Z"        -- 1 Feb 2008
    DESCRIPTION
            "Add UNITS clause to object, where appropriate."

    REVISION "200705220100Z"        -- 22 May 2007
    DESCRIPTION
            "Add acdAlarmCfgNumber object to Alarm traps."

    REVISION "200612190100Z"        -- 19 Dec 2006
    DESCRIPTION
            "Add 802.3AH notification enable and msg field in status table."

    REVISION "200608060100Z"        -- 6 Aug 2006
    DESCRIPTION
            "Initial version of MIB module ACD-ALARM-MIB."

    ::= { acdMibs 1 }

acdAlarmMIBObjects      OBJECT IDENTIFIER ::= { acdAlarm 15 }
acdAlarmConfig          OBJECT IDENTIFIER ::= { acdAlarmMIBObjects 1 }
acdAlarmStatus          OBJECT IDENTIFIER ::= { acdAlarmMIBObjects 2 }
acdAlarmConformance     OBJECT IDENTIFIER ::= { acdAlarmMIBObjects 3 }

acdAlarmTableTid        OBJECT IDENTIFIER ::= { acdAlarmMIBObjects 4 }

---------------------------------------------------------------------------
 -- Alarm General configuration
---------------------------------------------------------------------------
acdAlarmGenThreshOn OBJECT-TYPE
    SYNTAX      Unsigned32 (500..50000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This value represents the Alarm On Hysteris. This is the time since the
        detection of the On event inside the system versus the report. This is
        to avoid storm of notifications."
   ::= { acdAlarm 1 }
 
acdAlarmGenThreshOff OBJECT-TYPE
    SYNTAX      Unsigned32 (500..50000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This value represents the Alarm Off Hysteris. This is the time since the
        detection of the Off event inside the system versus the report. This is
        to avoid storm of notifications."
   ::= { acdAlarm 2 }

acdAlarmGenLedEnable  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This is to Enable the alarms reporting through the LEDs."
   ::= { acdAlarm 3 }

acdAlarmGenSyslogEnable  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This is to Enable the alarms reporting through the syslog system."
   ::= { acdAlarm 4 }

acdAlarmGenSNMPEnable  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This is to Enable the alarms reporting through the SNMP agent."
   ::= { acdAlarm 5 }

acdAlarmGen8023AHEnable  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This is to Enable the alarms reporting through the 802.3AH protocol."
   ::= { acdAlarm 6 }

---------------------------------------------------------------------------
 -- The Alarm configuration table
 -- This table contains the configuration for each alarm.
---------------------------------------------------------------------------

acdAlarmCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdAlarmCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of all alarms."
    ::= { acdAlarm 10 }

acdAlarmCfgEntry OBJECT-TYPE
    SYNTAX      AcdAlarmCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An alarm is an exceptional event that requires user notificaton."
    INDEX   { acdAlarmCfgID }
    ::=  { acdAlarmCfgTable 1 }

AcdAlarmCfgEntry ::= SEQUENCE {
    acdAlarmCfgID                   Unsigned32,
    acdAlarmCfgNumber               Unsigned32,
    acdAlarmCfgDesc                 DisplayString,
    acdAlarmCfgEnable               TruthValue,
    acdAlarmCfgSeverity             INTEGER,
    acdAlarmCfgServiceAffecting     TruthValue,
    acdAlarmCfgExtNumber            DisplayString,
    acdAlarmCfgConditionType        DisplayString,
    acdAlarmCfgAMOType              DisplayString

}

acdAlarmCfgID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Unique value for each alarm. Its value ranges from 1 to
    MAXINT (4 bytes). "
   ::= { acdAlarmCfgEntry 1 }

acdAlarmCfgNumber  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Unique number that identifies this alarm. Assigned by the unit. The
        alarm identifier is compose of 3 fields, the module number, the instance
        number and the error number. The alarm number looks like this:
        A.BBB.CC and is expressed in decimal, A is the module number, BBB is
        the instance number (1-999) and CC is the error number (1-99). A module
        number is assigned for each source of alarm in the system. For example
        the port module is set to 1, the SFP module is set to 2, the PAA is set
        to 3 and the environmental is set to 8."
   ::= { acdAlarmCfgEntry 2 }

acdAlarmCfgDesc  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..128))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This string is to describe the alarm in a readable way, e.g.:
        +5Vdc Power supply fail."
   ::= { acdAlarmCfgEntry 3 }

acdAlarmCfgEnable  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This is to indicate if the alarm is reported or not."
   ::= { acdAlarmCfgEntry 4 }

acdAlarmCfgSeverity  OBJECT-TYPE
    SYNTAX      INTEGER {
                    info(0),
                    minor(1),
                    major(2),
                    critical(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Accedian Networks classifies alarms into four severity types. These types
        and their associated decimal codes are, informational(0), minor(1),
        major(2) and critical(3)."
   ::= { acdAlarmCfgEntry 5 }

acdAlarmCfgServiceAffecting  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "This is to indicate if the alarm is service affecting or not. This
        value depends on the utilization of the box. For instance in an
        application where the monitoring of the traffic is mandatory the link
        down event on the monitor port is service affecting."
   ::= { acdAlarmCfgEntry 6 }

acdAlarmCfgExtNumber  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Unique number that identifies this alarm. Assigned by the unit. The
        alarm identifier is compose of 3 fields, the module number, the instance
        number and the error number. The alarm number looks like this:
        A.B.C and is expressed in decimal, A is the module number, B is
        the instance number and C is the error number. A module number is
        assigned for each source of alarm in the system (see Accedian 
        documentation for more detail)."
   ::= { acdAlarmCfgEntry 7 }

acdAlarmCfgConditionType  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the type of alarm condition."
   ::= { acdAlarmCfgEntry 8 }

acdAlarmCfgAMOType  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..128))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the Alarm Maintenance Object."
   ::= { acdAlarmCfgEntry 9 }

---------------------------------------------------------------------------
 -- The Alarms Status table
 -- This table contains the status of all alarms.
---------------------------------------------------------------------------

acdAlarmStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdAlarmStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of all alarms"
    ::= { acdAlarm 11 }

acdAlarmStatusEntry OBJECT-TYPE
    SYNTAX  AcdAlarmStatusEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An alarm is an exceptional event that requires user notificaton."
    INDEX   { acdAlarmStatusID }
    ::=  { acdAlarmStatusTable 1 }

AcdAlarmStatusEntry ::= SEQUENCE {
    acdAlarmStatusID            Unsigned32,
    acdAlarmStatusNumber        Unsigned32,
    acdAlarmStatusOn            TruthValue,
    acdAlarmStatusLastChange    DateAndTime,
    acdAlarmStatusMsg           DisplayString
}

acdAlarmStatusID OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Unique value for each alarm. Its value ranges from 1 to
        MAXINT (4 bytes). "
    ::= { acdAlarmStatusEntry 1 }

acdAlarmStatusNumber OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Unique number that identifies this alarm. Assigned by the unit. The
        alarm identifier is compose of 3 fields, the module number, the instance
        number and the error number. The alarm number looks like this:
        AAA.BBB.CC and is expressed in decimal, AAA is the module number, BBB is
        the instance number (1-999) and CC is the error number (1-99). A module
        number is assigned for each source of alarm in the system. For example
        the port module is set to 1, the SFP module is set to 2, the PAA is set
        to 3 and the environmental is set to 8."
    ::= { acdAlarmStatusEntry 2 }

acdAlarmStatusOn  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is to indicate if the alarm is On or Off."
    ::= { acdAlarmStatusEntry 3 }

acdAlarmStatusLastChange OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the time of the last change for this alarm. A value of zero
        means that nothing happened to this alarm since the last reboot."
    ::= { acdAlarmStatusEntry 4 }

acdAlarmStatusMsg  OBJECT-TYPE
    SYNTAX      DisplayString  (SIZE (0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This string is to add information why the alarm is reported."
    ::= { acdAlarmStatusEntry 5 }

--  Accedian Alarm Traps
---------------------------------------------------------------------------
--    DESCRIPTION "Definition point for Accedian Alarm notifications."
---------------------------------------------------------------------------

acdAlarmV2 OBJECT IDENTIFIER ::= { acdAlarm 12 }

acdAlarmActiveState NOTIFICATION-TYPE
    OBJECTS  {  acdAlarmCfgID,
                acdAlarmCfgNumber,
                acdAlarmCfgSeverity,
                acdAlarmCfgServiceAffecting,
                acdAlarmCfgDesc,
                acdAlarmStatusLastChange,
                acdAlarmCfgExtNumber,
                acdAlarmCfgConditionType,
                acdAlarmCfgAMOType,
                sysName }
    STATUS      current
    DESCRIPTION
        "The SNMP trap that is generated when an alarm
         entry crosses its rising threshold and generates
         an event that is configured for sending SNMP
         traps."

    ::= { acdAlarmV2 1 }

acdAlarmClearState NOTIFICATION-TYPE
    OBJECTS  {  acdAlarmCfgID,
                acdAlarmCfgNumber,
                acdAlarmCfgSeverity,
                acdAlarmCfgServiceAffecting,
                acdAlarmCfgDesc,
                acdAlarmStatusLastChange,
                acdAlarmCfgExtNumber,
                acdAlarmCfgConditionType,
                acdAlarmCfgAMOType,
                sysName }
    STATUS      current
    DESCRIPTION
        "The SNMP trap that is generated when an alarm
         entry crosses its falling threshold and generates
         an event that is configured for sending SNMP
         traps."

    ::= { acdAlarmV2 2 }

---------------------------------------------------------------------------
 -- Transaction ID Information
---------------------------------------------------------------------------

acdAlarmCfgTableLastChangeTid OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the transaction ID of the last change of the acdAlarmCfgTable
        table.  If this value is different since the last read this is indicate 
        a table change."
    ::= { acdAlarmTableTid 1 }

acdAlarmStatusTableLastChangeTid OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "This is the transaction ID of the last change of the acdAlarmStatusTable
        table.  If this value is different since the last read this is indicate 
        a table change."
    ::= { acdAlarmTableTid 2 }
    
---------------------------------------------------------------------------
 -- ACD-ALARM-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdAlarmCompliances  OBJECT IDENTIFIER ::= { acdAlarmConformance 1 }
acdAlarmGroups       OBJECT IDENTIFIER ::= { acdAlarmConformance 2 }

---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------

acdAlarmGenGroup OBJECT-GROUP
    OBJECTS {
        acdAlarmGenThreshOn,
        acdAlarmGenThreshOff,
        acdAlarmGenLedEnable,
        acdAlarmGenSyslogEnable,
        acdAlarmGenSNMPEnable,
        acdAlarmGen8023AHEnable
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdAlarmGroups 1 }

acdAlarmCfgGroup OBJECT-GROUP
    OBJECTS {
        acdAlarmCfgID,
        acdAlarmCfgNumber,
        acdAlarmCfgDesc,
        acdAlarmCfgEnable,
        acdAlarmCfgSeverity,
        acdAlarmCfgServiceAffecting,
        acdAlarmCfgExtNumber,
        acdAlarmCfgConditionType,
        acdAlarmCfgAMOType
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdAlarmGroups 2 }

acdAlarmStatusGroup OBJECT-GROUP
    OBJECTS {
        acdAlarmStatusID,
        acdAlarmStatusNumber,
        acdAlarmStatusOn,
        acdAlarmStatusLastChange,
        acdAlarmStatusMsg
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdAlarmGroups 3 }

acdAlarmNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        acdAlarmActiveState,
        acdAlarmClearState
    }
    STATUS      current
    DESCRIPTION
       "Objects for the Notifications group."
    ::= { acdAlarmGroups 4 }

acdAlarmTidGroup OBJECT-GROUP
    OBJECTS {
        acdAlarmCfgTableLastChangeTid,
        acdAlarmStatusTableLastChangeTid
    }
    STATUS      current
    DESCRIPTION
       "List of scalars to monitior changes in tables."
    ::= { acdAlarmGroups 5 }

---------------------------------------------------------------------------
-- MIB Module Compliance statements
---------------------------------------------------------------------------
acdAlarmCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-ALARM-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdAlarmGenGroup,
            acdAlarmCfgGroup,
            acdAlarmStatusGroup,
            acdAlarmNotificationsGroup,
            acdAlarmTidGroup
        }

    ::= { acdAlarmCompliances 1 }

END