ACD-SFP-MIB.mib

--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2010, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document is subject to change without notice.
--


ACD-SFP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Integer32, Unsigned32
        FROM SNMPv2-SMI
    DisplayString, TruthValue
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    acdMibs
        FROM ACCEDIAN-SMI;

acdSfp MODULE-IDENTITY

    LAST-UPDATED "201011100100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             2351 Alfred-Nobel blvd., Suite N-410
             Saint-Laurent, Quebec Canada H4S 2A9
             E-mail: support@accedian.com"
    DESCRIPTION
            "The SFPs database for this Accedian Networks device."

    REVISION "201011100100Z"        -- 10 November 2010
    DESCRIPTION
            "Add compliance section."

    REVISION "200804220100Z"        -- 22 April 2008
    DESCRIPTION
            "Add acdSfpInfoIdType, acdSfpInfoExtIdType and acdSfpInfoTransCode support."

    REVISION "200608060100Z"        -- 6 Aug 2006
    DESCRIPTION
            "Initial version of MIB module ACD-SFP-MIB."

    ::= { acdMibs 4 }

acdSfpNotifications   OBJECT IDENTIFIER ::= { acdSfp 5 }
acdSfpMIBObjects      OBJECT IDENTIFIER ::= { acdSfp 6 }
acdSfpConformance     OBJECT IDENTIFIER ::= { acdSfp 7 }

-----------------------------------------------------------------------
 -- The information SFP table
 -- This table contains all SFP Info.
---------------------------------------------------------------------------

acdSfpInfoTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSfpInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Table of all SFP info"
    ::= { acdSfp 1 }

acdSfpInfoEntry OBJECT-TYPE
    SYNTAX      AcdSfpInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This is a part of the content of the SFP's 0xA0 EEPROM"
    INDEX   { acdSfpInfoID }
    ::=  { acdSfpInfoTable 1 }


AcdSfpInfoEntry ::= SEQUENCE {
    acdSfpInfoID                Unsigned32,
    acdSfpInfoConnIdx           Unsigned32,
    acdSfpInfoConnType          INTEGER,
    acdSfpInfoVendor            DisplayString,
    acdSfpInfoVendorOui         DisplayString,
    acdSfpInfoVendorPn          DisplayString,
    acdSfpInfoVendorRev         DisplayString,
    acdSfpInfoWavelength        Unsigned32,
    acdSfpInfoSerialNum         DisplayString,
    acdSfpInfoYear              Unsigned32,
    acdSfpInfoMonth             Unsigned32,
    acdSfpInfoDay               Unsigned32,
    acdSfpInfoLot               Unsigned32,
    acdSfpInfoRev8472           INTEGER,
    acdSfpInfoPresent           TruthValue,
    acdSfpInfoDiag              TruthValue,
    acdSfpInfoInternal          TruthValue,
    acdSfpInfoAlm               TruthValue,
    acdSfpInfoIdType            Unsigned32,
    acdSfpInfoExtIdType         Unsigned32,
    acdSfpInfoTransCode         DisplayString
}

acdSfpInfoID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each SFP. Its value ranges from 1 to
        MAXINT (4 bytes). "
   ::= { acdSfpInfoEntry 1 }

acdSfpInfoConnIdx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies the connector index on the box. The index
         is assigned form left to rigth starting with 1."
   ::= { acdSfpInfoEntry 2 }

acdSfpInfoConnType OBJECT-TYPE
    SYNTAX      INTEGER {
                    sfpSC(1),
                    sfpFC1COPPER(2),
                    sfpFC2COPPER(3),
                    sfpBNC(4),
                    sfpFCCOAX(5),
                    sfpFIBERJACK(6),
                    sfpLC(7),
                    sfpMTRJ(8),
                    sfpMU(9),
                    sfpSG(10),
                    sfpPIGTAIL(11),
                    sfpHSSDCII(32),
                    sfpCOPPERPIGTAIL(33)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The connector value indicates the external optical or electrical
         cable connector provided as the media interface."
    ::= { acdSfpInfoEntry 3 }

acdSfpInfoVendor OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vendor name is a 16 character field that contains ASCII 
         characters, left-aligned and padded on the right with ASCII 
         spaces (20h). The vendor name shall be the full name of the
         corporation, a commonly accepted abbreviation of the name of
         the corporation, the SCSI company code for the corporation, 
         or the stock exchange code for the corporation. At least one
         of the vendor name or the vendor OUI fields shall contain 
         valid serial data."
    ::= { acdSfpInfoEntry 4 }

acdSfpInfoVendorOui OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (3))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vendor organizationally unique identifier field (vendor OUI)
         is a 3-byte field that contains the IEEE Company Identifier for 
         the vendor. A value of all zero in the 3-byte field indicates 
         that the Vendor OUI is unspecified."
    ::= { acdSfpInfoEntry 5 }

acdSfpInfoVendorPn OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vendor part number (vendor PN) is a 16-byte field that
         contains ASCII characters, leftaligned and padded on the 
         right with ASCII spaces (20h), defining the vendor's part 
         number or product name. A value of all zero in the 16-byte
         field indicates that the vendor PN is unspecified."
    ::= { acdSfpInfoEntry 6 }

acdSfpInfoVendorRev OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vendor revision number (vendor rev) is a 4-byte field that
         contains ASCII characters, leftaligned and padded on the right
         with ASCII spaces (20h), defining the vendor's product revision
         number. A value of all zero in the 4-byte field indicates that
         the vendor PN is unspecified."
    ::= { acdSfpInfoEntry 7 }

acdSfpInfoWavelength  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Nominal transmitter output wavelength at room temperature. 16 bit
         value with byte 60 as high order byte and byte 61 as low order 
         byte. The laser wavelength is equal to the 16 bit integer
         value in nm. This field allows the user to read the laser 
         wavelength directly, so it is not necessary to infer it from the
         transceiver Code for Electronic Compatibility."
   ::= { acdSfpInfoEntry 8 }

acdSfpInfoSerialNum OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vendor serial number (vendor SN) is a 16 character field that
        contains ASCII characters, left-aligned and padded on the right 
        with ASCII spaces (20h), defining the vendor's serial number for
        the transceiver. A value of all zero in the 16-byte field indicates
        that the vendor PN is unspecified."
    ::= { acdSfpInfoEntry 9 }

acdSfpInfoYear  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the year of manufacturing."
   ::= { acdSfpInfoEntry 10 }

acdSfpInfoMonth  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the month of manufacturing."
   ::= { acdSfpInfoEntry 11 }

acdSfpInfoDay  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the day of manufacturing."
   ::= { acdSfpInfoEntry 12 }

acdSfpInfoLot  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the Lot number of manufacturing."
   ::= { acdSfpInfoEntry 13 }


acdSfpInfoRev8472  OBJECT-TYPE
    SYNTAX      INTEGER {
                    undefined(0),
                    rev93(1),
                    rev94(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate to which revision this SFP is compatible."
   ::= { acdSfpInfoEntry 14 }

acdSfpInfoPresent  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the SFP is present or not."
   ::= { acdSfpInfoEntry 15 }

acdSfpInfoDiag  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the SFP supports Digital Diagnostics."
   ::= { acdSfpInfoEntry 16 }

acdSfpInfoInternal  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the SFP supports internal calibration. If
         externally calibrated, the measurements are raw A/D values and must
         be converted to real world units using calibration constants 
         stored in EEPROM locations 56 to 95 at 2 wire serial bus address
         A2h. Calibration is valid over vendor specified operating 
         temperature and voltage. Alarm and warning threshold values
         should be interpreted in the same manner as real time 16 bit data."
   ::= { acdSfpInfoEntry 17 }

acdSfpInfoAlm  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the SFP supports Alarm and warning 
        thresholds for the Digital Diagnostics."
   ::= { acdSfpInfoEntry 18 }

acdSfpInfoIdType  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The identifier value specifies the physical device described by
        the two-wire interface information. This value shall be included
        in the two-wire interface data (see SFF-8472 for details)."
   ::= { acdSfpInfoEntry 19 }

acdSfpInfoExtIdType  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The extended identifier value provides additional information
        about the transceiver. The field should be set to 04h for all SFP
        modules indicating two-wire interface ID module definition (see
        SFF-8472 for details)."
   ::= { acdSfpInfoEntry 20 }

acdSfpInfoTransCode OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (8))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The following bit significant indicators define the electronic
        or optical interfaces that are supported by the transceiver. At
        least one bit shall be set in this field (see SFF-8472 for details)."
    ::= { acdSfpInfoEntry 21 }

-----------------------------------------------------------------------
 -- The Digital Diagnostics SFP table
 -- This table contains all SFP Digital Diagnostics.
---------------------------------------------------------------------------

acdSfpDiagTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AcdSfpDiagEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "Table of all SFP Digital Diagnostics"
    ::= { acdSfp 2 }

acdSfpDiagEntry OBJECT-TYPE
    SYNTAX  AcdSfpDiagEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
            "This is a part the content of the SFP's 0xA0 EEPROM"
    INDEX   { acdSfpDiagID }
    ::=  { acdSfpDiagTable 1 }


AcdSfpDiagEntry ::= SEQUENCE {
    acdSfpDiagID                Unsigned32,
    acdSfpDiagConnIdx           Unsigned32,
    acdSfpDiagTemp              Integer32,
    acdSfpDiagVcc               Unsigned32,
    acdSfpDiagLbc               Unsigned32,
    acdSfpDiagTxPwr             Unsigned32,
    acdSfpDiagRxPwr             Unsigned32,
    acdSfpDiagTxPwrdBm          DisplayString,
    acdSfpDiagRxPwrdBm          DisplayString
}

acdSfpDiagID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each SFP. Its value ranges from 1 to
        MAXINT (4 bytes). "
   ::= { acdSfpDiagEntry 1 }

acdSfpDiagConnIdx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies the connector index on the box. The index
         is assigned form left to rigth starting with 1."
   ::= { acdSfpDiagEntry 2 }

acdSfpDiagTemp OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Internally measured transceiver temperature. Represented as a
         16 bit signed twos complement value in degrees Celsius, yielding
         a total range of -128C to +128C."
    ::= { acdSfpDiagEntry 3 }

acdSfpDiagVcc OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Internally measured transceiver supply voltage. Represented as
         a 16 bit unsigned integer with the voltage defined as the full
         16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
         yielding a total range of 0 to +6.55 Volts."
    ::= { acdSfpDiagEntry 4 }

acdSfpDiagLbc OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Measured TX bias current in micro-Amps yielding a total range of
         0 to 131 mA."
    ::= { acdSfpDiagEntry 5 }

acdSfpDiagTxPwr OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Measured TX output power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpDiagEntry 6 }

acdSfpDiagRxPwr OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Measured Rx input power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpDiagEntry 7 }

acdSfpDiagTxPwrdBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Measured TX output power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpDiagEntry 8 }

acdSfpDiagRxPwrdBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Measured Rx input power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpDiagEntry 9 }

-----------------------------------------------------------------------
 -- The Alarm and Warning Thresholds SFP table
 -- This table contains all SFP Alarm and Warning Thresholds.
---------------------------------------------------------------------------

acdSfpThreshTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSfpThreshEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Table of all SFP Alarm and Warning Thresholds"
    ::= { acdSfp 3 }

acdSfpThreshEntry OBJECT-TYPE
    SYNTAX      AcdSfpThreshEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            " This is a part the content of the SFP's 0xA0 EEPROM"
    INDEX   { acdSfpThreshID }
    ::=  { acdSfpThreshTable 1 }


AcdSfpThreshEntry ::= SEQUENCE {
    acdSfpThreshID                Unsigned32,
    acdSfpThreshConnIdx           Unsigned32,
    acdSfpThreshTempHighAlm       Integer32,
    acdSfpThreshTempLowAlm        Integer32,
    acdSfpThreshTempHighWarn      Integer32,
    acdSfpThreshTempLowWarn       Integer32,
    acdSfpThreshVccHighAlm        Unsigned32,
    acdSfpThreshVccLowAlm         Unsigned32,
    acdSfpThreshVccHighWarn       Unsigned32,
    acdSfpThreshVccLowWarn        Unsigned32,
    acdSfpThreshLbcHighAlm        Unsigned32,
    acdSfpThreshLbcLowAlm         Unsigned32,
    acdSfpThreshLbcHighWarn       Unsigned32,
    acdSfpThreshLbcLowWarn        Unsigned32,
    acdSfpThreshTxPwrHighAlm      Unsigned32,
    acdSfpThreshTxPwrLowAlm       Unsigned32,
    acdSfpThreshTxPwrHighWarn     Unsigned32,
    acdSfpThreshTxPwrLowWarn      Unsigned32,
    acdSfpThreshRxPwrHighAlm      Unsigned32,
    acdSfpThreshRxPwrLowAlm       Unsigned32,
    acdSfpThreshRxPwrHighWarn     Unsigned32,
    acdSfpThreshRxPwrLowWarn      Unsigned32,
    acdSfpThreshTxPwrHighAlmdBm   DisplayString,
    acdSfpThreshTxPwrLowAlmdBm    DisplayString,
    acdSfpThreshTxPwrHighWarndBm  DisplayString,
    acdSfpThreshTxPwrLowWarndBm   DisplayString,
    acdSfpThreshRxPwrHighAlmdBm   DisplayString,
    acdSfpThreshRxPwrLowAlmdBm    DisplayString,
    acdSfpThreshRxPwrHighWarndBm  DisplayString,
    acdSfpThreshRxPwrLowWarndBm   DisplayString

}

acdSfpThreshID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each SFP. Its value ranges from 1 to
        MAXINT (4 bytes). "
   ::= { acdSfpThreshEntry 1 }

acdSfpThreshConnIdx  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies the connector index on the box. The index
         is assigned form left to rigth starting with 1."
   ::= { acdSfpThreshEntry 2 }

acdSfpThreshTempHighAlm OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm transceiver temperature. Represented as a 16 bit
         signed twos complement value in degrees Celsius, yielding
         a total range of -128C to +128C."
    ::= { acdSfpThreshEntry 3 }

acdSfpThreshTempLowAlm OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm transceiver temperature. Represented as a 16 bit
         signed twos complement value in degrees Celsius, yielding
         a total range of -128C to +128C."
    ::= { acdSfpThreshEntry 4 }

acdSfpThreshTempHighWarn OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning transceiver temperature. Represented as a 16 bit
         signed twos complement value in degrees Celsius, yielding
         a total range of -128C to +128C."
    ::= { acdSfpThreshEntry 5 }

acdSfpThreshTempLowWarn OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning transceiver temperature. Represented as a 16 bit
         signed twos complement value in degrees Celsius, yielding
         a total range of -128C to +128C."
    ::= { acdSfpThreshEntry 6 }

acdSfpThreshVccHighAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm transceiver supply voltage. Represented as
         a 16 bit unsigned integer with the voltage defined as the full
         16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
         yielding a total range of 0 to +6.55 Volts."
    ::= { acdSfpThreshEntry 7 }

acdSfpThreshVccLowAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm transceiver supply voltage. Represented as
         a 16 bit unsigned integer with the voltage defined as the full
         16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
         yielding a total range of 0 to +6.55 Volts."
    ::= { acdSfpThreshEntry 8 }

acdSfpThreshVccHighWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning transceiver supply voltage. Represented as
         a 16 bit unsigned integer with the voltage defined as the full
         16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
         yielding a total range of 0 to +6.55 Volts."
    ::= { acdSfpThreshEntry 9 }

acdSfpThreshVccLowWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning transceiver supply voltage. Represented as
         a 16 bit unsigned integer with the voltage defined as the full
         16 bit value (0 to 65535) with LSB equal to 100 micro-Volt,
         yielding a total range of 0 to +6.55 Volts."
    ::= { acdSfpThreshEntry 10 }

acdSfpThreshLbcHighAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm TX bias current in micro-Amps yielding a total range of
         0 to 131 mA."
    ::= { acdSfpThreshEntry 11 }

acdSfpThreshLbcLowAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm TX bias current in micro-Amps yielding a total range of
         0 to 131 mA."
    ::= { acdSfpThreshEntry 12 }

acdSfpThreshLbcHighWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning TX bias current in micro-Amps yielding a total range of
         0 to 131 mA."
    ::= { acdSfpThreshEntry 13 }

acdSfpThreshLbcLowWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning TX bias current in micro-Amps yielding a total range of
         0 to 131 mA."
    ::= { acdSfpThreshEntry 14 }

acdSfpThreshTxPwrHighAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm TX output power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 15 }

acdSfpThreshTxPwrLowAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm TX output power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 16 }

acdSfpThreshTxPwrHighWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning TX output power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 17 }

acdSfpThreshTxPwrLowWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning TX output power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 18 }

acdSfpThreshRxPwrHighAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm RX input power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 19 }

acdSfpThreshRxPwrLowAlm OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm RX input power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 20 }

acdSfpThreshRxPwrHighWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning RX input power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 21 }

acdSfpThreshRxPwrLowWarn OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning RX input power in mW. Represented as a 16 bit unsigned
         integer with the power defined as the full 16 bit value (0 to 65535)
         with LSB equal to 0.1 micro-Watt, yielding a total range of 0 
         to 6.5535 mW (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 22 }

acdSfpThreshTxPwrHighAlmdBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm TX output power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 23 }

acdSfpThreshTxPwrLowAlmdBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm TX output power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 24 }

acdSfpThreshTxPwrHighWarndBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning TX output power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 25 }

acdSfpThreshTxPwrLowWarndBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning TX output power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 26 }

acdSfpThreshRxPwrHighAlmdBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Alarm Rx input power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 27 }

acdSfpThreshRxPwrLowAlmdBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Alarm Rx input power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 28 }

acdSfpThreshRxPwrHighWarndBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "High Warning Rx input power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 29 }

acdSfpThreshRxPwrLowWarndBm OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Low Warning Rx input power in dBm (~ -40 to +8.2 dBm)."
    ::= { acdSfpThreshEntry 30 }

------------------------------------------------------------------------------
 -- The Alarm and Warning Thresholds SFP Status table
 -- This table contains all statuses for the SFP Alarm and Warning Thresholds.
------------------------------------------------------------------------------

acdSfpThreshStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSfpThreshStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Table of all SFP Digital Diagnostics Thresholds statuses"
    ::= { acdSfp 4 }

acdSfpThreshStatusEntry OBJECT-TYPE
    SYNTAX      AcdSfpThreshStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This is a part the content of the SFP's 0xA2 EEPROM"
    INDEX   { acdSfpThreshStatusID }
    ::=  { acdSfpThreshStatusTable 1 }


AcdSfpThreshStatusEntry ::= SEQUENCE {
    acdSfpThreshStatusID                Unsigned32,
    acdSfpThreshStatusConnIdx           Unsigned32,
    acdSfpThreshStatusTempHighAlm       TruthValue,
    acdSfpThreshStatusTempLowAlm        TruthValue,
    acdSfpThreshStatusTempHighWarn      TruthValue,
    acdSfpThreshStatusTempLowWarn       TruthValue,
    acdSfpThreshStatusVccHighAlm        TruthValue,
    acdSfpThreshStatusVccLowAlm         TruthValue,
    acdSfpThreshStatusVccHighWarn       TruthValue,
    acdSfpThreshStatusVccLowWarn        TruthValue,
    acdSfpThreshStatusLbcHighAlm        TruthValue,
    acdSfpThreshStatusLbcLowAlm         TruthValue,
    acdSfpThreshStatusLbcHighWarn       TruthValue,
    acdSfpThreshStatusLbcLowWarn        TruthValue,
    acdSfpThreshStatusTxPwrHighAlm      TruthValue,
    acdSfpThreshStatusTxPwrLowAlm       TruthValue,
    acdSfpThreshStatusTxPwrHighWarn     TruthValue,
    acdSfpThreshStatusTxPwrLowWarn      TruthValue,
    acdSfpThreshStatusRxPwrHighAlm      TruthValue,
    acdSfpThreshStatusRxPwrLowAlm       TruthValue,
    acdSfpThreshStatusRxPwrHighWarn     TruthValue,
    acdSfpThreshStatusRxPwrLowWarn      TruthValue
}

acdSfpThreshStatusID OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each SFP. Its value ranges from 1 to
        MAXINT (4 bytes). "
   ::= { acdSfpThreshStatusEntry 1 }

acdSfpThreshStatusConnIdx OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object identifies the connector index on the box. The index
         is assigned form left to rigth starting with 1."
   ::= { acdSfpThreshStatusEntry 2 }

acdSfpThreshStatusTempHighAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the temperature reaches or overpasses the High 
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 3 }

acdSfpThreshStatusTempLowAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the temperature reaches or underpasses the Low 
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 4 }

acdSfpThreshStatusTempHighWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the temperature reaches or overpasses the High 
         warning threshold."
   ::= { acdSfpThreshStatusEntry 5 }

acdSfpThreshStatusTempLowWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the temperature reaches or underpasses the Low
         warning threshold."
   ::= { acdSfpThreshStatusEntry 6 }

acdSfpThreshStatusVccHighAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the supply voltage reaches or overpasses the High 
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 7 }

acdSfpThreshStatusVccLowAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the supply voltage reaches or underpasses the Low
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 8 }

acdSfpThreshStatusVccHighWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the supply voltage reaches or overpasses the High 
         warning threshold."
   ::= { acdSfpThreshStatusEntry 9 }

acdSfpThreshStatusVccLowWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the supply voltage reaches or underpasses the Low
         warning threshold."
   ::= { acdSfpThreshStatusEntry 10 }

acdSfpThreshStatusLbcHighAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Laser Bias Current reaches or overpasses
         the High alarm threshold."
   ::= { acdSfpThreshStatusEntry 11 }

acdSfpThreshStatusLbcLowAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Laser Bias Current reaches or underpasses
         the Low alarm threshold."
   ::= { acdSfpThreshStatusEntry 12 }

acdSfpThreshStatusLbcHighWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Laser Bias Current reaches or overpasses
         the High warning threshold."
   ::= { acdSfpThreshStatusEntry 13 }

acdSfpThreshStatusLbcLowWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Laser Bias Current reaches or underpasses
         the Low warning threshold."
   ::= { acdSfpThreshStatusEntry 14 }

acdSfpThreshStatusTxPwrHighAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Transmit Power reaches or overpasses the High 
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 15 }

acdSfpThreshStatusTxPwrLowAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Transmit Power reaches or underpasses the Low
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 16 }

acdSfpThreshStatusTxPwrHighWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Transmit Power reaches or overpasses the High 
         warning threshold."
   ::= { acdSfpThreshStatusEntry 17 }

acdSfpThreshStatusTxPwrLowWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Transmit Power reaches or underpasses the Low
         warning threshold."
   ::= { acdSfpThreshStatusEntry 18 }

acdSfpThreshStatusRxPwrHighAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Receive Power reaches or overpasses the High 
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 19 }

acdSfpThreshStatusRxPwrLowAlm OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Receive Power reaches or underpasses the Low 
         alarm threshold."
   ::= { acdSfpThreshStatusEntry 20 }

acdSfpThreshStatusRxPwrHighWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Receive Power reaches or overpasses the High 
         warning threshold."
   ::= { acdSfpThreshStatusEntry 21 }

acdSfpThreshStatusRxPwrLowWarn OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the Receive Power reaches or underpasses the Low 
         warning threshold."
   ::= { acdSfpThreshStatusEntry 22 }

---------------------------------------------------------------------------
 -- ACD-SFP-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdSfpCompliances  OBJECT IDENTIFIER ::= { acdSfpConformance 1 }
acdSfpGroups       OBJECT IDENTIFIER ::= { acdSfpConformance 2 }

---------------------------------------------------------------------------
 -- Units of conformance
---------------------------------------------------------------------------

acdSfpInfoGroup OBJECT-GROUP
    OBJECTS {
        acdSfpInfoConnIdx,
        acdSfpInfoConnType,
        acdSfpInfoVendor,
        acdSfpInfoVendorOui,
        acdSfpInfoVendorPn,
        acdSfpInfoVendorRev,
        acdSfpInfoWavelength,
        acdSfpInfoSerialNum,
        acdSfpInfoYear,
        acdSfpInfoMonth,
        acdSfpInfoDay,
        acdSfpInfoLot,
        acdSfpInfoRev8472,
        acdSfpInfoPresent,
        acdSfpInfoDiag,
        acdSfpInfoInternal,
        acdSfpInfoAlm,
        acdSfpInfoIdType,
        acdSfpInfoExtIdType,
        acdSfpInfoTransCode
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SFP information Group."
    ::= { acdSfpGroups 1 }

acdSfpDiagGroup OBJECT-GROUP
    OBJECTS {
        acdSfpDiagConnIdx,
        acdSfpDiagTemp,
        acdSfpDiagVcc,
        acdSfpDiagLbc,
        acdSfpDiagTxPwr,
        acdSfpDiagRxPwr,
        acdSfpDiagTxPwrdBm,
        acdSfpDiagRxPwrdBm
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SFP diagnostics Group."
    ::= { acdSfpGroups 2 }

acdSfpThreshGroup OBJECT-GROUP
    OBJECTS {
        acdSfpThreshConnIdx,
        acdSfpThreshTempHighAlm,
        acdSfpThreshTempLowAlm,
        acdSfpThreshTempHighWarn,
        acdSfpThreshTempLowWarn,
        acdSfpThreshVccHighAlm,
        acdSfpThreshVccLowAlm,
        acdSfpThreshVccHighWarn,
        acdSfpThreshVccLowWarn,
        acdSfpThreshLbcHighAlm,
        acdSfpThreshLbcLowAlm,
        acdSfpThreshLbcHighWarn,
        acdSfpThreshLbcLowWarn,
        acdSfpThreshTxPwrHighAlm,
        acdSfpThreshTxPwrLowAlm,
        acdSfpThreshTxPwrHighWarn,
        acdSfpThreshTxPwrLowWarn,
        acdSfpThreshRxPwrHighAlm,
        acdSfpThreshRxPwrLowAlm,
        acdSfpThreshRxPwrHighWarn,
        acdSfpThreshRxPwrLowWarn,
        acdSfpThreshTxPwrHighAlmdBm,
        acdSfpThreshTxPwrLowAlmdBm,
        acdSfpThreshTxPwrHighWarndBm,
        acdSfpThreshTxPwrLowWarndBm,
        acdSfpThreshRxPwrHighAlmdBm,
        acdSfpThreshRxPwrLowAlmdBm,
        acdSfpThreshRxPwrHighWarndBm,
        acdSfpThreshRxPwrLowWarndBm
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SFP thresholds Group."
    ::= { acdSfpGroups 3 }

acdSfpThreshStatusGroup OBJECT-GROUP
    OBJECTS {
        acdSfpThreshStatusConnIdx,
        acdSfpThreshStatusTempHighAlm,
        acdSfpThreshStatusTempLowAlm,
        acdSfpThreshStatusTempHighWarn,
        acdSfpThreshStatusTempLowWarn,
        acdSfpThreshStatusVccHighAlm,
        acdSfpThreshStatusVccLowAlm,
        acdSfpThreshStatusVccHighWarn,
        acdSfpThreshStatusVccLowWarn,
        acdSfpThreshStatusLbcHighAlm,
        acdSfpThreshStatusLbcLowAlm,
        acdSfpThreshStatusLbcHighWarn,
        acdSfpThreshStatusLbcLowWarn,
        acdSfpThreshStatusTxPwrHighAlm,
        acdSfpThreshStatusTxPwrLowAlm,
        acdSfpThreshStatusTxPwrHighWarn,
        acdSfpThreshStatusTxPwrLowWarn,
        acdSfpThreshStatusRxPwrHighAlm,
        acdSfpThreshStatusRxPwrLowAlm,
        acdSfpThreshStatusRxPwrHighWarn,
        acdSfpThreshStatusRxPwrLowWarn
    }
    STATUS      current
    DESCRIPTION
       "Objects for the SFP threshold status Group."
    ::= { acdSfpGroups 4 }

acdSfpCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-SFP-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdSfpInfoGroup,
            acdSfpDiagGroup,
            acdSfpThreshGroup,
            acdSfpThreshStatusGroup
         }

    ::= { acdSfpCompliances 1 }

END