Releases: keirf/flashfloppy
Releases · keirf/flashfloppy
FlashFloppy 4.5a
- Contains fixes up to v3.34 from v3 stable release series
- Supports AT32F435 MCU and SFRKC430.AT4.35 PCB
FlashFloppy 3.34
- AT32F435: Fix startup to MCU spec (LDO voltage, Flash clock divisor)
- AT32F435: Cache HFE and QD image data, since there is plenty of RAM
- Allow rotary encoder on pins PA13/PA14 on any board except QFN32 MCU
- io-test: Fix io-test alt firmware for modern Gotek boards
FlashFloppy 3.33
- Support new board SFRKC30.AT4.35
- Support new chip AT32F435 (288MHz M4, 256kB+ Flash, 384kB SRAM)
- New UPD file format and explanatory README: Please read!
FlashFloppy 3.32
- Fix 'oled-font=8x16' option (broken in release 3.31)
- Improve drive-select ISR performance
- Fixes issues with fast Amiga accelerators
FlashFloppy 3.31
- Fix Gotek drive detection with Amiga Kickstart ROM v3.2.1
- QD: FF.CFG alternative to JC jumper (no JC on SFRKC30.AT2 model)
- Place "interface=ibmpc" in FF.CFG
- OLED: New "-slow" modifier to slow down I2C bus for glitchy displays
- AUTOBOOT: Disallow writes to MBR, which can trash the USB drive
v3.30
- IMG.CFG: New option step= allows to specify double-step operation
- FF.CFG: New option max-cyl= allows limiting head-step range
- SFRKC30 Gotek Models: Improved rotary support on new "KC30" header
FlashFloppy v4.4a
- DSK: Async I/O fixes
- IMG.CFG: New option step= allows to specify double-step operation
- FF.CFG: New option max-cyl= allows limiting head-step range
v4.3a
- QuickDisk: Ported to new async I/O framework
- Various I/O bug fixes
v4.2a
- DSK: Ported to new async I/O framework
- ringio: A few bug fixes
v4.1a
This release also has a bug that can cause data loss, especially with HFE. The bug is dependent on the USB drive write speed.
- Contains fixes/features up to v3.29 from v3 stable release series
- Do not use index_suppressed if starting rd DMA is slow
- ringio: Do not lose write for unaligned wd_prod
- hfe: Protect HFEv3 against a broken run of 1s