Connect_Disconnect_WiFi.ino

/*********************************************************************************************************************************
  Connect_Disconnect_WiFi.ino

  Library for communicating with a MySQL or MariaDB Server

  Based on and modified from Dr. Charles A. Bell's MySQL_Connector_Arduino Library https://github.com/ChuckBell/MySQL_Connector_Arduino
  to support nRF52, SAMD21/SAMD51, SAM DUE, STM32F/L/H/G/WB/MP1, ESP8266, ESP32, etc. boards using W5x00, ENC28J60, LAM8742A Ethernet,
  WiFiNINA, ESP-AT, built-in ESP8266/ESP32 WiFi.

  The library provides simple and easy Client interface to MySQL or MariaDB Server.

  Built by Khoi Hoang https://github.com/khoih-prog/MySQL_MariaDB_Generic
  Licensed under MIT license
 **********************************************************************************************************************************/
/*
  MySQL Connector/Arduino Example : connect and disconnect (close)

  This example demonstrates how to use the connection to open at the start
  of a loop, perform some query, then close the connection. Use this technique
  for solutions that must sleep for a long period or otherwise require
  additional processing or delays. The connect/close pair allow you to
  control how long the connection is open and thus reduce the amount of
  time a connection is held open. It also helps for lossy connections.

  This example demonstrates how to connect to a MySQL server and specifying
  the default database when connecting.

  For more information and documentation, visit the wiki:
  https://github.com/ChuckBell/MySQL_Connector_Arduino/wiki.

  INSTRUCTIONS FOR USE

  1) Change the address of the server to the IP address of the MySQL server
  2) Change the user and password to a valid MySQL user and password
  3) Connect a USB cable to your Arduino
  4) Select the correct board and port
  5) Compile and upload the sketch to your Arduino
  6) Once uploaded, open Serial Monitor (use 115200 speed) and observe

  Created by: Dr. Charles A. Bell
*/

#include "defines.h"
#include "Credentials.h"

#include <MySQL_Generic.h>

#define USING_HOST_NAME     false   //true

#if USING_HOST_NAME
  // Optional using hostname, and Ethernet built-in DNS lookup
  char server[] = "your_account.ddns.net"; // change to your server's hostname/URL
#else
  IPAddress server(192, 168, 2, 112);
#endif

uint16_t server_port = 5698;    //3306;

MySQL_Connection conn((Client *)&client);
MySQL_Query query = MySQL_Query(&conn);

void setup()
{
  Serial.begin(115200);
  while (!Serial && millis() < 5000); // wait for serial port to connect

  MYSQL_DISPLAY1("\nStarting Connect_Disconnect_WiFi on", BOARD_NAME);
  MYSQL_DISPLAY(MYSQL_MARIADB_GENERIC_VERSION);


  // Begin WiFi section
  MYSQL_DISPLAY1("Connecting to", ssid);

  WiFi.begin(ssid, pass);
  
  while (WiFi.status() != WL_CONNECTED) 
  {
    delay(500);
    MYSQL_DISPLAY0(".");
  }

  // print out info about the connection:
  MYSQL_DISPLAY1("Connected to network. My IP address is:", WiFi.localIP());
}

void runQuery()
{
  MYSQL_DISPLAY("Running a query: SELECT * FROM test_arduino.hello_arduino LIMIT 6;");
  
  // Execute the query
  // KH, check if valid before fetching
  if ( !query.execute("SELECT * FROM test_arduino.hello_arduino LIMIT 6;") )
  {
    MYSQL_DISPLAY("Querying error");
    return;
  }
  
  query.show_results();             // show the results
  query.close();                    // close the query
}

void loop()
{
  MYSQL_DISPLAY("Connecting...");
  
  //if (conn.connect(server, server_port, user, password))
  if (conn.connectNonBlocking(server, server_port, user, password) != RESULT_FAIL)
  {
    delay(500);
    runQuery();
    conn.close();                     // close the connection
  } 
  else 
  {
    MYSQL_DISPLAY("\nConnect failed. Trying again on next iteration.");
  }

  MYSQL_DISPLAY("\nSleeping...");
  MYSQL_DISPLAY("================================================");
 
  delay(60000);
}