NextLevelEdition

SMD 32U4 Massproduction Ready PCB that fits in Mixtape

How to install

Download Hardware Cores from Sparkfun: https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide/installing-mac--linux

For Linux udev rules needs to be changed: http://forum.arduino.cc/index.php?topic=217910.0

/etc/udev/rules.d/70-persistent-net.rules

 # 8Bit Mixtape NextLevel Shit
 
ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="f100", ENV{ID_MM_DEVICE_IGNORE}="1"

ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="f101", ENV{ID_MM_DEVICE_IGNORE}="1"

Troubleshooting

If the serial port doesn't appear, see above.

Strange blinking: Did you attach the LiPo battery?

Bricked the board? if you choose the wrong board and upload this might happen. solder on the ISP plug and burn the bootloader. the files is in the core.

for linux: avrdude -P /dev/ttyACM0 -b 19200 -c avrisp -p m32u4 -v -e -U flash:w:Caterina-fio.hex:i

Pins:

2 x Analog Input

A0 ( you can also only write 0) -> D18

A1 ( you can also only write 1) -> D19

2 x Digital Input / Buttons

D2 (2)

D3 (3)

Sound Output

D9 (9) also connected to LED2

LEDs

D13 (13)

the middle i don't know. maybe charge state?

RX (0)

TX (1)

Timers

To change the prescaler of the timer connected to Pin9 (sound output)

TCCR1B = TCCR0B & 0b11111001; //no timer pre-scaler, fast PWM