This repository has been archived by the owner on Mar 26, 2019. It is now read-only.
forked from LibreELEC/linux-amlogic
-
Notifications
You must be signed in to change notification settings - Fork 12
/
gxl_p212_1g.dts
1219 lines (1173 loc) · 30.9 KB
/
gxl_p212_1g.dts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
* arch/arm64/boot/dts/amlogic/gxl_p212.dts
*
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/gxl.h>
#include <dt-bindings/gpio/gxl.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/aml_gxl.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pwm/meson.h>
#include "mesongxl.dtsi"
/ {
model = "Amlogic";
compatible = "amlogic, Gxbb";
amlogic-dt-id = "gxl_p212_1g";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart_AO;
serial1 = &uart_A;
serial2 = &uart_B;
serial3 = &uart_C;
serial4 = &uart_AO_B;
};
memory@00000000 {
device_type = "memory";
linux,usable-memory = <0x0 0x100000 0x0 0x3f000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global autoconfigured region for contiguous allocations */
secmon_reserved:linux,secmon {
compatible = "amlogic, aml_secmon_memory";
reg = <0x0 0x10000000 0x0 0x200000>;
no-map;
};
secos_reserved:linux,secos {
status = "disable";
compatible = "amlogic, aml_secos_memory";
reg = <0x0 0x05300000 0x0 0x2000000>;
no-map;
};
pstore:aml_pstore {
compatible = "amlogic, pstore";
reg = <0x0 0x07300000 0x0 0x100000>;
no-map;
};
fb_reserved:linux,meson-fb {
compatible = "amlogic, fb-memory";
size = <0x0 0x2000000>;
no-map;
};
di_reserved:linux,di {
compatible = "amlogic, di-mem";
/** 10x3133440=30M(0x1e) support 8bit **/
size = <0x0 0x1e00000>;
//no-map;
};
ion_reserved:linux,ion-dev {
compatible = "amlogic, idev-mem";
size = <0x0 0x2000000>;
};
/* vdin0 CMA pool */
//vdin0_cma_reserved:linux,vdin0_cma {
// compatible = "shared-dma-pool";
// linux,phandle = <4>;
// reusable;
/* 1920x1080x2x4 =16+4 M */
// size = <0x0 0x01400000>;
// alignment = <0x0 0x400000>;
//};
/* vdin1 CMA pool */
vdin1_cma_reserved:linux,vdin1_cma {
compatible = "shared-dma-pool";
reusable;
/* 1920x1080x2x4 =16 M */
size = <0x0 0x01000000>;
alignment = <0x0 0x400000>;
};
/* POST PROCESS MANAGER */
ppmgr_reserved:linux,ppmgr {
compatible = "shared-dma-pool";
size = <0x0 0x0>;
};
codec_mm_cma:linux,codec_mm_cma {
compatible = "shared-dma-pool";
reusable;
size = <0x0 0xc000000>;
alignment = <0x0 0x400000>;
linux,contiguous-region;
};
picdec_cma_reserved:linux,picdec {
compatible = "shared-dma-pool";
reusable;
size = <0x0 0x0>;
alignment = <0x0 0x0>;
linux,contiguous-region;
};
/* codec shared reserved */
codec_mm_reserved:linux,codec_mm_reserved {
compatible = "amlogic, codec-mm-reserved";
size = <0x0 0x4100000>;
alignment = <0x0 0x100000>;
//no-map;
};
/*vm_reserved:linux,vm {
compatible = "amlogic, vm_memory";
size = <0x0 0x2000000>;
};*/
};
sysled {
compatible = "amlogic, sysled";
dev_name = "sysled";
status = "okay";
led_gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
led_active_low = <1>;
};
meson-vout {
compatible = "amlogic, meson-vout";
dev_name = "meson-vout";
status = "okay";
};
meson-fb {
compatible = "amlogic, meson-fb";
memory-region = <&fb_reserved>;
dev_name = "meson-fb";
status = "okay";
interrupts = <0 3 1
0 89 1>;
interrupt-names = "viu-vsync", "rdma";
mem_size = <0x01800000 0x00100000>; /* fb0/fb1 memory size */
display_mode_default = "1080p60hz";
scale_mode = <1>; /** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
display_size_default = <1920 1080 1920 3240 32>; //1920*1080*4*3 = 0x17BB000
logo_addr = "0x3d851000";
};
ge2d {
compatible = "amlogic, ge2d";
dev_name = "ge2d";
status = "okay";
interrupts = <0 150 1>;
interrupt-names = "ge2d";
clocks = <&clock CLK_VAPB_0>,
<&clock CLK_GE2D>;
clock-names = "clk_vapb_0",
"clk_ge2d";
resets = <&clock GCLK_IDX_GE2D>;
reset-names = "ge2d";
};
codec_io {
compatible = "amlogic, codec_io";
#address-cells=<2>;
#size-cells=<2>;
ranges;
io_cbus_base{
reg = <0x0 0xC1100000 0x0 0x100000>;
};
io_dos_base{
reg = <0x0 0xc8820000 0x0 0x10000>;
};
io_hiubus_base{
reg = <0x0 0xc883c000 0x0 0x2000>;
};
io_aobus_base{
reg = <0x0 0xc8100000 0x0 0x100000>;
};
io_vcbus_base{
reg = <0x0 0xd0100000 0x0 0x40000>;
};
io_dmc_base{
reg = <0x0 0xc8838000 0x0 0x400>;
};
};
codec_mm {
compatible = "amlogic, codec, mm";
memory-region = <&codec_mm_cma &codec_mm_reserved>;
dev_name = "codec_mm";
status = "okay";
};
ethmac: ethernet@0xc9410000 {
compatible = "amlogic, gxbb-rmii-dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x8
0x0 0xc8834558 0x0 0xc>;
interrupts = <0 8 1
0 9 1>;
phy-mode= "rmii";
pinctrl-names = "internal_eth_pins";
pinctrl-0 = <&internal_eth_pins>;
mc_val = <0x1800>;
resets = <&clock GCLK_IDX_ETHERNET>;
reset-names = "ethpower";
interrupt-names = "macirq",
"phyirq";
clocks = <&clock CLK_81>;
clock-names = "ethclk81";
internal_phy=<1>;
wol=<0>;
};
mesonstream {
compatible = "amlogic, codec, streambuf";
dev_name = "mesonstream";
status = "okay";
resets = <&clock GCLK_IDX_HIU_PARSER_TOP
&clock GCLK_IDX_VPU_INTR
&clock GCLK_IDX_DEMUX
&clock GCLK_IDX_DOS>;
reset-names = "parser_top",
"vpu_intr",
"demux",
"vdec";
};
amvideocap {
compatible = "amlogic, amvideocap";
dev_name = "amvideocap.0";
status = "okay";
max_size = <8>;//8M
};
ion_dev {
compatible = "amlogic, ion_dev";
memory-region = <&ion_reserved>;
};
vdec {
compatible = "amlogic, vdec";
dev_name = "vdec.0";
status = "okay";
interrupts = <0 3 1
0 23 1
0 32 1
0 43 1
0 44 1
0 45 1>;
interrupt-names = "vsync",
"demux",
"parser",
"mailbox_0",
"mailbox_1",
"mailbox_2";
};
picdec {
compatible = "amlogic, picdec";
memory-region = <&picdec_cma_reserved>;
dev_name = "picdec";
status = "okay";
};
ppmgr {
compatible = "amlogic, ppmgr";//to match of_device_id's compatible member
memory-region = <&ppmgr_reserved>;
dev_name = "ppmgr";
status = "okay";
};
deinterlace {
compatible = "amlogic, deinterlace";
status = "okay";
memory-region = <&di_reserved>;
interrupts = <0 46 1
0 6 1>;
interrupt-names = "de_irq",
"timerc";
/* nr_size(byte) = 1920*544*2(yuv422 8bit) | 1920*544*2*12/8(yuv422 10bit) | 1920*544*2*10/8(yuv422 10bit full pack mode) */
/* mtn_size(byte) = 1920*544/2 */
/* count_size(byte) = 1920*544/2 */
buffer-size = <3133440>;
hw-version = <2>;
};
/*if you want to use vdin just modify status to "ok"*/
vdin0 {
compatible = "amlogic, vdin";
/*memory-region = <&vdin0_cma_reserved>;*/
dev_name = "vdin0";
status = "ok";
reserve-iomap = "true";
flag_cma = <1>;/*1:share with codec_mm;2:cma alone*/
/*MByte, if 10bit disable: 64M(YUV422), if 10bit enable: 64*1.5 = 96M(YUV422)
*if support 4K2K-YUV444-10bit-WR:3840*2160*4*4 ~= 128M
*if support 4K2K-YUV422-10bit-wr:3840*2160*3*4 ~= 96M
*if support 4K2K-YUV422-8BIT-WR:3840*2160*2*4 ~= 64M
*if support 1080p-YUV422-8BIT-WR:1920*1080*2*4 ~= 16M*/
cma_size = <16>;
interrupts = <0 83 1>;
rdma-irq = <2>;
clocks = <&clock CLK_FPLL_DIV5>,
<&clock CLK_VDIN_MEAS_CLK>;
clock-names = "fclk_div5", "cts_vdin_meas_clk";
vdin_id = <0>;
/*vdin write mem color depth support:
*bit0:support 8bit
*bit1:support 9bit
*bit2:support 10bit
*bit3:support 12bit
*bit4:support yuv422 10bit full pack mode (from txl new add)*/
tv_bit_mode = <1>;
};
vdin1 {
compatible = "amlogic, vdin";
memory-region = <&vdin1_cma_reserved>;
dev_name = "vdin1";
status = "ok";
reserve-iomap = "true";
flag_cma = <0>;/*1:share with codec_mm;0:cma alone*/
interrupts = <0 85 1>;
rdma-irq = <4>;
clocks = <&clock CLK_FPLL_DIV5>,
<&clock CLK_VDIN_MEAS_CLK>;
clock-names = "fclk_div5", "cts_vdin_meas_clk";
vdin_id = <1>;
/*vdin write mem color depth support:
*bit0:support 8bit
*bit1:support 9bit
*bit2:support 10bit
*bit3:support 12bit*/
tv_bit_mode = <1>;
};
amvdec_656in0 {
compatible = "amlogic, amvdec_656in";
dev_name = "amvdec_656in0";
status = "ok";
reg = <0x0 0xd0048000 0x0 0x7c>;
clocks = <&clock CLK_FPLL_DIV2>,
<&clock CLK_BT656_CLK0>;
clock-names = "fclk_div2", "cts_bt656_clk0";
bt656_id = <0>;
};
amvdec_656in1 {
compatible = "amlogic, amvdec_656in";
dev_name = "amvdec_656in1";
status = "ok";
reg = <0x0 0xd0050000 0x0 0x7c>;
clocks = <&clock CLK_FPLL_DIV2>,
<&clock CLK_BT656_CLK1>;
clock-names = "fclk_div2", "cts_bt656_clk1";
bt656_id = <1>;
};
amlvecm {
compatible = "amlogic, vecm";
dev_name = "aml_vecm";
status = "okay";
gamma_en = <0>;/*1:enabel ;0:disable*/
wb_en = <0>;/*1:enabel ;0:disable*/
cm_en = <0>;/*1:enabel ;0:disable*/
};
amvenc_avc{
compatible = "amlogic, amvenc_avc";
//memory-region = <&amvenc_avc_reserved>;
//memory-region = <&avc_cma_reserved>;
dev_name = "amvenc_avc";
status = "okay";
interrupts = <0 45 1>;
interrupt-names = "mailbox_2";
};
/*vm {
compatible = "amlogic, vm";
memory-region = <&vm_reserved>;
dev_name = "vm";
status = "okay";
};*/
vpu {
compatible = "amlogic, vpu";
dev_name = "vpu";
status = "ok";
clk_level = <7>;
/** 0: 100.0M 1: 166.7M 2: 200.0M
3: 250.0M 4: 333.3M 5: 400.0M
6: 500.0M 7: 666.7M */
};
//if use bt, open it
bt-dev{
compatible = "amlogic, bt-dev";
dev_name = "bt-dev";
status = "okay";
gpio_reset = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
};
rtc{
compatible = "amlogic, aml_vrtc";
alarm_reg_addr = <0xc81000a8>;
timer_e_addr = <0xc1109988>;
init_date = "2015/01/01";
status = "okay";
};
wifi{
compatible = "amlogic, aml_wifi";
dev_name = "aml_wifi";
status = "okay";
interrupt_pin = <&gpio GPIOX_7 GPIO_ACTIVE_HIGH>;
interrupts = < 0 68 4>;
irq_trigger_type = "GPIO_IRQ_LOW";
power_on_pin = <&gpio GPIOX_6 GPIO_ACTIVE_HIGH>;
dhd_static_buf; //if use bcm wifi, config dhd_static_buf and 32k as bellow
pinctrl-names = "wifi_32k_pins";
pinctrl-0 = <&wifi_32k_pins>;
pwm_config = <&wifi_pwm_conf>;
};
wifi_pwm_conf:wifi_pwm_conf{
pwm_channel1 = <PWM_E>;
pwm_channel2 = <PWM_E2>;
pwm_channel1_conf = <30541 15270 6>;
pwm_channel2_conf = <30518 15259 9>;
};
emmc{
compatible = "amlogic, aml_sd_emmc";
dev_name = "aml_newsd.0";
status = "okay";
reg = <0x0 0xd0074000 0x0 0x2000>;
interrupts = < 0 218 1>;
pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
pinctrl-0 = <&emmc_clk_cmd_pins>;
pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done &emmc_all_pins>;
emmc{
status = "disabled";
pinname = "emmc";
ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
caps = "MMC_CAP_8_BIT_DATA","MMC_CAP_MMC_HIGHSPEED",
"MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE","MMC_CAP_1_8V_DDR",
"MMC_CAP_HW_RESET", "MMC_CAP_ERASE", "MMC_CAP_CMD23";
caps2 = "MMC_CAP2_HS200", "MMC_CAP2_HS400";
f_min = <300000>;
f_max = <100000000>;
max_req_size = <0x20000>; /**256KB*/
gpio_dat3 = <&gpio BOOT_3 GPIO_ACTIVE_HIGH>;
hw_reset = <&gpio BOOT_9 GPIO_ACTIVE_HIGH>;
card_type = <1>; /* 1:mmc card(include eMMC), 2:sd card(include tSD), */
};
};
sd{
compatible = "amlogic, aml_sd_emmc";
dev_name = "aml_newsd.0";
status = "okay";
reg = <0x0 0xd0072000 0x0 0x2000>;
interrupts = < 0 217 1
0 67 1
0 69 1>;
pinctrl-names = "sd_clk_cmd_pins", "sd_all_pins", "sd_1bit_pins","sd_clk_cmd_uart_pins","sd_1bit_uart_pins", "sd_to_ao_uart_pins", "ao_to_sd_uart_pins","ao_to_sd_jtag_pins","sd_to_ao_jtag_pins";
pinctrl-0 = <&sd_clk_cmd_pins>;
pinctrl-1 = <&sd_all_pins>;
pinctrl-2 = <&sd_1bit_pins>;
pinctrl-3 = <&sd_clk_cmd_uart_pins>;
pinctrl-4 = <&sd_1bit_uart_pins>;
pinctrl-5 = <&sd_to_ao_uart_pins>;
pinctrl-6 = <&ao_to_sd_uart_pins>;
pinctrl-7 = <&ao_to_sd_jtag_pins>;
pinctrl-8 = <&sd_to_ao_jtag_pins>;
sd{
status = "okay";
pinname = "sd";
ocr_avail = <0x00200080>; // 3.3:0x200000, 1.8+3.3:0x00200080
caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED",
"MMC_CAP_SD_HIGHSPEED";
//"MMC_CAP_UHS_SDR12",
//"MMC_CAP_UHS_SDR25","MMC_CAP_UHS_SDR50",
//"MMC_CAP_UHS_SDR104";
f_min = <400000>;
f_max = <100000000>;
max_req_size = <0x20000>; /**128KB*/
gpio_dat3 = <&gpio CARD_4 GPIO_ACTIVE_HIGH>;
jtag_pin = <&gpio CARD_0 GPIO_ACTIVE_HIGH>;
gpio_cd = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
irq_in = <3>;
irq_out = <5>;
card_type = <5>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */
};
};
sdio{
compatible = "amlogic, aml_sd_emmc";
dev_name = "aml_newsd.0";
status = "okay";
reg = <0x0 0xd0070000 0x0 0x2000>;
interrupts = < 0 216 4>;
pinctrl-names = "sdio_clk_cmd_pins", "sdio_all_pins";
pinctrl-0 = <&sdio_clk_cmd_pins>;
pinctrl-1 = <&sdio_all_pins>;
sdio{
status = "okay";
pinname = "sdio";
ocr_avail = <0x00200080>; /*3.3:0x200000, 1.8+3.3:0x00200080 */
caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED",
"MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE",
"MMC_CAP_UHS_SDR12","MMC_CAP_UHS_SDR25",
"MMC_CAP_UHS_SDR50","MMC_CAP_UHS_SDR104",
"MMC_PM_KEEP_POWER","MMC_CAP_SDIO_IRQ";
f_min = <400000>;
f_max = <200000000>;
max_req_size = <0x20000>; /**128KB*/
card_type = <3>; /*3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, */
};
};
nand{
compatible = "amlogic, aml_nand";
dev_name = "nand";
status = "disabled";
reg = <0x0 0xd0074800 0x0 0x200>;
interrupts = < 0 34 1 >;
pinctrl-names = "nand_rb_mod","nand_norb_mod", "nand_cs_pins_only";
pinctrl-0 = <&conf_nand_pulldown &conf_nand_pullup &all_nand_pins>;
pinctrl-1 = <&conf_nand_pulldown &conf_nand_pullup &all_nand_pins>;
pinctrl-2 = <&nand_cs_pins>;
device_id = <0>;
plat-names = "nandnormal";
plat-num = <1>;
plat-part-0 = <&normal>;
normal: normal{
enable_pad ="ce0","ce1","ce2","ce3";
busy_pad = "rb0";
};
};
aml_nftl{
compatible = "amlogic, nftl";
/* config nftl here */
};
/*aml_cams{
compatible = "amlogic, cams_prober";
status = "okay";
clocks = <&clock CLK_CAMERA_24M>;
clock-names = "clk_camera_24";
pinctrl-names = "gpio";
pinctrl-0 = <&aml_cam_gpio_pins> ;
cam_0{
cam_name = "sp2518";
front_back = <0>;
i2c_bus = "i2c_bus_a";
gpio_pwdn-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_HIGH>;
gpio_rst-gpios = <&gpio GPIOZ_12 GPIO_ACTIVE_HIGH>;
mirror_flip = <1>;
vertical_flip = <1>;
spread_spectrum = <0>; //0:none; 1:0.3%; 2:0.6%; 3:1.25%; 4:2.5%; 5:5%
bt_path = "gpio";
status = "okay";
};
};*/
partitions: partitions{
parts = <11>;
part-0 = <&logo>;
part-1 = <&recovery>;
part-2 = <&rsv>;
part-3 = <&tee>;
part-4 = <&crypt>;
part-5 = <&misc>;
part-6 = <&instaboot>;
part-7 = <&boot>;
part-8 = <&system>;
part-9 = <&cache>;
part-10 = <&data>;
logo:logo{
pname = "logo";
size = <0x0 0x2000000>;
mask = <1>;
};
recovery:recovery{
pname = "recovery";
size = <0x0 0x2000000>;
mask = <1>;
};
rsv:rsv{
pname = "rsv";
size = <0x0 0x800000>;
mask = <1>;
};
tee:tee{
pname = "tee";
size = <0x0 0x800000>;
mask = <1>;
};
crypt:crypt{
pname = "crypt";
size = <0x0 0x2000000>;
mask = <1>;
};
misc:misc{
pname = "misc";
size = <0x0 0x2000000>;
mask = <1>;
};
instaboot:instaboot{
pname = "instaboot";
size = <0x0 0x20000000>;
mask = <1>;
};
boot:boot
{
pname = "boot";
size = <0x0 0x2000000>;
mask = <1>;
};
system:system
{
pname = "system";
size = <0x0 0x40000000>;
mask = <1>;
};
cache:cache
{
pname = "cache";
size = <0x0 0x20000000>;
mask = <2>;
};
data:data
{
pname = "data";
size = <0xffffffff 0xffffffff>;
mask = <4>;
};
};
unifykey{
compatible = "amlogic, unifykey";
status = "ok";
unifykey-num = <14>;
unifykey-index-0 = <&keysn_0>;
unifykey-index-1 = <&keysn_1>;
unifykey-index-2 = <&keysn_2>;
unifykey-index-3 = <&keysn_3>;
unifykey-index-4 = <&keysn_4>;
unifykey-index-5 = <&keysn_5>;
unifykey-index-6 = <&keysn_6>;
unifykey-index-7 = <&keysn_7>;
unifykey-index-8 = <&keysn_8>;
unifykey-index-9 = <&keysn_9>;
unifykey-index-10= <&keysn_10>;
unifykey-index-11= <&keysn_11>;
unifykey-index-12= <&keysn_12>;
unifykey-index-13= <&keysn_13>;
keysn_0: key_0{
key-name = "usid";
key-device = "normal";
key-permit = "read","write","del";
};
keysn_1:key_1{
key-name = "mac";
key-device = "normal";
key-permit = "read","write","del";
};
keysn_2:key_2{
key-name = "hdcp";
key-device = "secure";
key-type = "sha1";
key-permit = "read","write","del";
};
keysn_3:key_3{
key-name = "secure_boot_set";
key-device = "efuse";
key-permit = "write";
};
keysn_4:key_4{
key-name = "mac_bt";
key-device = "normal";
key-permit = "read","write","del";
key-type = "mac";
};
keysn_5:key_5{
key-name = "mac_wifi";
key-device = "normal";
key-permit = "read","write","del";
key-type = "mac";
};
keysn_6:key_6{
key-name = "hdcp2_tx";
key-device = "normal";
key-permit = "read","write","del";
};
keysn_7:key_7{
key-name = "hdcp2_rx";
key-device = "normal";
key-permit = "read","write","del";
};
keysn_8:key_8{
key-name = "widevinekeybox";
key-device = "secure";
key-permit = "read","write","del";
};
keysn_9:key_9{
key-name = "deviceid";
key-device = "normal";
key-permit = "read","write","del";
};
keysn_10:key_10{
key-name = "hdcp22_fw_private";
key-device = "secure";
key-permit = "read","write","del";
};
keysn_11:key_11{
key-name = "PlayReadykeybox25";
key-device = "secure";
key-permit = "read","write","del";
};
keysn_12:key_12{
key-name = "prpubkeybox";// PlayReady
key-device = "secure";
key-permit = "read","write","del";
};
keysn_13:key_13{
key-name = "prprivkeybox";// PlayReady
key-device = "secure";
key-permit = "read","write","del";
};
};//End unifykey
amhdmitx: amhdmitx{
compatible = "amlogic, amhdmitx";
dev_name = "amhdmitx";
status = "okay";
pinctrl-names="hdmitx_hpd", "hdmitx_ddc";
pinctrl-0=<&hdmitx_hpd>;
pinctrl-1=<&hdmitx_ddc>;
/* HPD, 57 + 32 = 89; CEC, 151 + 32 = 183*/
interrupts = <0 57 1>;
interrupt-names = "hdmitx_hpd";
clocks = <&clock CLK_HDMITX_SYS &clock CLK_HDMITX_ENCP
&clock CLK_HDMITX_ENCI &clock CLK_HDMITX_PIXEL
&clock CLK_HDMITX_PHY &clock CLK_VID>;
clock-names = "hdmitx_clk_sys", "hdmitx_clk_encp", "hdmitx_clk_enci",
"hdmitx_clk_pixel", "hdmitx_clk_phy", "hdmitx_clk_vid";
gpio_i2c_en = <0x1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
};
aocec: aocec{
compatible = "amlogic, amlogic-aocec";
device_name = "aocec";
status = "okay";
vendor_name = "Amlogic"; /* Max Chars: 8 */
vendor_id = <0x000000>; /* Refer to http://standards.ieee.org/develop/regauth/oui/oui.txt */
product_desc = "GXBB Mbox"; /* Max Chars: 16 */
cec_osd_string = "MBox"; /* Max Chars: 14 */
port_num = <1>;
arc_port_mask = <0x0>;
interrupts = <0 199 1>;
interrupt-names = "hdmi_aocec";
pinctrl-names = "hdmitx_aocec";
pinctrl-0=<&hdmitx_aocec>;
reg = <0x0 0xc810023c 0x0 0x4
0x0 0xc8100000 0x0 0x200>;
};
tvout {
compatible = "amlogic, tvout";
dev_name = "tvout";
status = "okay";
};
i2c_gpio: i2c_gpio {
compatible = "i2c-gpio";
status = "okay";
dev_name = "i2c-gpio";
i2c-gpio,delay-us = <10>; /* 50 kHz */
gpios = <&gpio GPIOH_1 0
&gpio GPIOH_2 0>;
#address-cells = <2>;
#size-cells = <2>;
i2c-gpio,timeout-ms = <10>;
i2c_gpio_edid: i2c_gpio_edid {
compatible = "i2c-gpio-edid";
reg = <0x50 0x0 0x0 0x0>;
};
};
uart_AO: serial@c81004c0 {
compatible = "amlogic, meson-uart";
reg = <0x0 0xc81004c0 0x0 0x18>;
interrupts = <0 193 1>;
status = "okay";
clocks = <&clock CLK_XTAL>;
clock-names = "clk_uart";
xtal_tick_en = <1>;
fifosize = < 64 >;
pinctrl-names = "default";
//pinctrl-0 = <&ao_uart_pins>;
support-sysrq = <0>; /* 0 not support , 1 support */
};
uart_A: serial@c11084c0 {
compatible = "amlogic, meson-uart";
reg = <0x0 0xc11084c0 0x0 0x18>;
interrupts = <0 26 1>;
status = "okay";
clocks = <&clock CLK_XTAL>;
clock-names = "clk_uart";
fifosize = < 128 >;
pinctrl-names = "default";
pinctrl-0 = <&a_uart_pins>;
resets = <&clock GCLK_IDX_UART0>;
};
uart_B: serial@c11084dc {
compatible = "amlogic, meson-uart";
reg = <0x0 0xc11084dc 0x0 0x18>;
interrupts = <0 75 1>;
status = "disable";
clocks = <&clock CLK_XTAL>;
clock-names = "clk_uart";
fifosize = < 64 >;
pinctrl-names = "default";
pinctrl-0 = <&b_uart_pins>;
resets = <&clock GCLK_IDX_UART1>;
};
uart_C: serial@c1108700 {
compatible = "amlogic, meson-uart";
reg = <0x0 0xc1108700 0x0 0x18>;
interrupts = <0 93 1>;
status = "disable";
clocks = <&clock CLK_XTAL>;
clock-names = "clk_uart";
fifosize = < 64 >;
pinctrl-names = "default";
pinctrl-0 = <&c_uart_pins>;
resets = <&clock GCLK_IDX_UART2>;
};
uart_AO_B: serial@c81004e0 {
compatible = "amlogic, meson-uart";
reg = <0x0 0xc81004e0 0x0 0x18>;
interrupts = <0 197 1>;
status = "disable";
clocks = <&clock CLK_XTAL>;
clock-names = "clk_uart";
fifosize = < 64 >;
pinctrl-names = "default";
pinctrl-0 = <&ao_b_uart_pins>;
};
canvas{
compatible = "amlogic, meson, canvas";
dev_name = "amlogic-canvas";
status = "ok";
reg = <0x0 0xc8838000 0x0 0x400>;
};
rdma{
compatible = "amlogic, meson, rdma";
dev_name = "amlogic-rdma";
status = "ok";
interrupts = <0 89 1>;
interrupt-names = "rdma";
};
dwc3: dwc3@c9000000 {
compatible = "synopsys, dwc3";
reg = <0x0 0xc9000000 0x0 0x100000>;
interrupts = <0 30 4>;
usb-phy = <&usb2_phy>, <&usb3_phy>;
cpu-type = "gxl";
clock-src = "usb3.0";
};
usb2_phy: usb2phy@d0078000 {
compatible = "amlogic, amlogic-new-usb2";
portnum = <2>;
reg = <0x0 0xd0078000 0x0 0x80>;
};
usb3_phy: usb3phy@d0078080 {
compatible = "amlogic, amlogic-new-usb3";
portnum = <0>;
reg = <0x0 0xd0078080 0x0 0x20>;
};
dwc2_a {
compatible = "amlogic,dwc2";
device_name = "dwc2_a";
reg = <0x0 0xc9100000 0x0 0x40000>;
status = "okay";
interrupts = <0 31 4>;
pl-periph-id = <0>; /** lm name */
clock-src = "usb0"; /** clock src */
port-id = <0>; /** ref to mach/usb.h */
port-type = <2>; /** 0: otg, 1: host, 2: slave */
port-speed = <0>; /** 0: default, high, 1: full */
port-config = <0>; /** 0: default */
port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/
port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
usb-fifo = <728>;
cpu-type = "gxl";
controller-type = <1>; /** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/
phy-reg = <0xd0078000>;
phy-reg-size = <0xa0>;
resets = <&clock GCLK_IDX_USB_GENERAL
&clock GCLK_IDX_MISC_USB1_TO_DDR
&clock GCLK_IDX_USB1>;
reset-names = "usb_general",
"usb1",
"usb1_to_ddr";
};
/* AUDIO MESON8 DEVICES */
i2s_dai: I2S {
#sound-dai-cells = <0>;
resets = <
&clock GCLK_IDX_AIU_AI_TOP_GLUE
&clock GCLK_IDX_AUD_BUF_ABD
&clock GCLK_IDX_AIU_I2S_OUT
&clock GCLK_IDX_AIU_AMCLK_MEASURE
&clock GCLK_IDX_AIU_AIFIFO2
&clock GCLK_IDX_AIU_AUD_MIXER
&clock GCLK_IDX_AIU_MIXER_REG
&clock GCLK_IDX_AIU_ADC
&clock GCLK_IDX_AIU_TOP_LEVEL
&clock GCLK_IDX_AIU_AOCLK
&clock GCLK_IDX_AUD_IN
>;
reset-names =
"top_glue",
"aud_buf",
"i2s_out",
"amclk_measure",
"aififo2",
"aud_mixer",
"mixer_reg",
"adc",
"top_level",
"aoclk",
"aud_in";
clocks = <&clock CLK_MPLL2>,
<&clock CLK_AMCLK>;
clock-names = "mpll2", "mclk";
compatible = "amlogic, aml-i2s-dai";
};
spdif_dai: SPDIF {
#sound-dai-cells = <0>;
compatible = "amlogic, aml-spdif-dai";
resets = <
&clock GCLK_IDX_AIU_IEC958
&clock GCLK_IDX_AIU_ICE958_AMCLK
>;
reset-names =
"iec958",
"iec958_amclk";
clocks = <&clock CLK_MPLL1>,
<&clock CLK_I958>,
<&clock CLK_AMCLK>,
<&clock CLK_SPDIF>,
<&clock CLK_81>;
clock-names = "mpll1", "i958", "mclk", "spdif", "clk_81";
};
pcm_dai: PCM {
#sound-dai-cells = <0>;
compatible = "amlogic, aml-pcm-dai";
pinctrl-names = "aml_audio_btpcm";
pinctrl-0 = <&audio_btpcm_pins>;
clocks = <&clock CLK_MPLL0>,
<&clock CLK_PCM_MCLK>,
<&clock CLK_PCM_SCLK>;
clock-names = "mpll0", "pcm_mclk", "pcm_sclk";
pcm_mode = <1>; /* 0=slave mode, 1=master mode */
};
i2s_plat: i2s_platform {
compatible = "amlogic, aml-i2s";
interrupts = <0 29 1>;
};
pcm_plat: pcm_platform {
compatible = "amlogic, aml-pcm";
};
spdif_codec: spdif_codec{
#sound-dai-cells = <0>;
compatible = "amlogic, aml-spdif-codec";
pinctrl-names = "aml_audio_spdif";
pinctrl-0 = <&audio_spdif_pins>;
};
pcm_codec: pcm_codec{
#sound-dai-cells = <0>;
compatible = "amlogic, pcm2BT-codec";
};
/* endof AUDIO MESON8 DEVICES */