We use the kicad-ESP8266 Libary form jdunmire.
To clone the whole Repository including the submodules simpy use the --recusive
Option or run the Commands git submodule init && git submodule update
inside this repository adter cloning.
Install the following librarys via the Arduino IDE:
- Adafruit BME280 Library
- Adafruit GFX LIbrary
- Adafruit NeoPixel
- Adafruit Unified Sensor
- ACROBOTIC SSD1306
Modify three lib-files (first two for I2C):
- Adafruit_BME280.h: Line 32: Change
BME280_ADDRESS
from0x77
to0x76
- Adafruit_BME280.cpp: Line 50: Change
Wire.begin();
toWire.begin(5, 4); // Pin D1, D2 of ESP
- Adafruit_SSD1306.h: Line 73/74: use line 73
#define SSD1306_128_64
instead of line 74#define SSD1306_128_32