Skip to content

Latest commit

 

History

History
215 lines (147 loc) · 10.5 KB

labels.md

File metadata and controls

215 lines (147 loc) · 10.5 KB

WARNING WARNING WARNING WARNING WARNING

PLEASE NOTE: This document applies to the HEAD of the source tree

If you are using a released version of Kubernetes, you should refer to the docs that go with that version.

The latest 1.0.x release of this document can be found [here](http://releases.k8s.io/release-1.0/docs/user-guide/labels.md).

Documentation for other releases can be found at releases.k8s.io.

Labels

Table of Contents

Labels are key/value pairs that are attached to objects, such as pods. Labels are intended to be used to specify identifying attributes of objects that are meaningful and relevant to users, but which do not directly imply semantics to the core system. Labels can be used to organize and to select subsets of objects. Labels can be attached to objects at creation time and subsequently added and modified at any time. Each object can have a set of key/value labels defined. Each Key must be unique for a given object.

"labels": {
  "key1" : "value1",
  "key2" : "value2"
}

We'll eventually index and reverse-index labels for efficient queries and watches, use them to sort and group in UIs and CLIs, etc. We don't want to pollute labels with non-identifying, especially large and/or structured, data. Non-identifying information should be recorded using annotations.

Motivation

Labels enable users to map their own organizational structures onto system objects in a loosely coupled fashion, without requiring clients to store these mappings.

Service deployments and batch processing pipelines are often multi-dimensional entities (e.g., multiple partitions or deployments, multiple release tracks, multiple tiers, multiple micro-services per tier). Management often requires cross-cutting operations, which breaks encapsulation of strictly hierarchical representations, especially rigid hierarchies determined by the infrastructure rather than by users.

Example labels:

  • "release" : "stable", "release" : "canary"
  • "environment" : "dev", "environment" : "qa", "environment" : "production"
  • "tier" : "frontend", "tier" : "backend", "tier" : "cache"
  • "partition" : "customerA", "partition" : "customerB"
  • "track" : "daily", "track" : "weekly"

These are just examples; you are free to develop your own conventions.

Syntax and character set

Labels are key value pairs. Valid label keys have two segments: an optional prefix and name, separated by a slash (/). The name segment is required and must be 63 characters or less, beginning and ending with an alphanumeric character ([a-z0-9A-Z]) with dashes (-), underscores (_), dots (.), and alphanumerics between. The prefix is optional. If specified, the prefix must be a DNS subdomain: a series of DNS labels separated by dots (.), not longer than 253 characters in total, followed by a slash (/). If the prefix is omitted, the label key is presumed to be private to the user. Automated system components (e.g. kube-scheduler, kube-controller-manager, kube-apiserver, kubectl, or other third-party automation) which add labels to end-user objects must specify a prefix. The kubernetes.io/ prefix is reserved for Kubernetes core components.

Valid label values must be 63 characters or less and must be empty or begin and end with an alphanumeric character ([a-z0-9A-Z]) with dashes (-), underscores (_), dots (.), and alphanumerics between.

Label selectors

Unlike names and UIDs, labels do not provide uniqueness. In general, we expect many objects to carry the same label(s).

Via a label selector, the client/user can identify a set of objects. The label selector is the core grouping primitive in Kubernetes.

The API currently supports two types of selectors: equality-based and set-based. A label selector can be made of multiple requirements which are comma-separated. In the case of multiple requirements, all must be satisfied so the comma separator acts as an AND logical operator.

An empty label selector (that is, one with zero requirements) selects every object in the collection.

A null label selector (which is only possible for optional selector fields) selects no objects.

Equality-based requirement

Equality- or inequality-based requirements allow filtering by label keys and values. Matching objects must satisfy all of the specified label constraints, though they may have additional labels as well. Three kinds of operators are admitted =,==,!=. The first two represent equality (and are simply synonyms), while the latter represents inequality. For example:

environment = production
tier != frontend

The former selects all resources with key equal to environment and value equal to production. The latter selects all resources with key equal to tier and value distinct from frontend, and all resources with no labels with the tier key. One could filter for resources in production excluding frontend using the comma operator: environment=production,tier!=frontend

Set-based requirement

Set-based label requirements allow filtering keys according to a set of values. Three kinds of operators are supported: in,notin and exists (only the key identifier). For example:

environment in (production, qa)
tier notin (frontend, backend)
partition
!partition

The first example selects all resources with key equal to environment and value equal to production or qa. The second example selects all resources with key equal to tier and values other than frontend and backend, and all resources with no labels with the tier key. The third example selects all resources including a label with key partition; no values are checked. The fourth example selects all resources without a label with key partition; no values are checked. Similarly the comma separator acts as an AND operator. So filtering resources with a partition key (no matter the value) and with environment different than  qa can be achieved using partition,environment notin (qa). The set-based label selector is a general form of equality since environment=production is equivalent to environment in (production); similarly for != and notin.

Set-based requirements can be mixed with equality-based requirements. For example: partition in (customerA, customerB),environment!=qa.

API

LIST and WATCH filtering

LIST and WATCH operations may specify label selectors to filter the sets of objects returned using a query parameter. Both requirements are permitted:

* _equality-based_ requirements: `?labelSelector=environment%3Dproduction,tier%3Dfrontend`
* _set-based_ requirements: `?labelSelector=environment+in+%28production%2Cqa%29%2Ctier+in+%28frontend%29`

Both label selector styles can be used to list or watch resources via a REST client. For example targetting apiserver with kubectl and using equality-based one may write:

$ kubectl get pods -l environment=production,tier=frontend

or using set-based requirements:

$ kubectl get pods -l 'environment in (production),tier in (frontend)'

As already mentioned set-based requirements are more expressive.  For instance, they can implement the OR operator on values:

$ kubectl get pods -l 'environment in (production, qa)'

or restricting negative matching via exists operator:

$ kubectl get pods -l 'environment,environment notin (frontend)'

Set references in API objects

Some Kubernetes objects, such as services and replicationcontrollers, also use label selectors to specify sets of other resources, such as pods.

Service and ReplicationController

The set of pods that a service targets is defined with a label selector. Similarly, the population of pods that a replicationcontroller should manage is also defined with a label selector.

Labels selectors for both objects are defined in json or yaml files using maps, and only equality-based requirement selectors are supported:

"selector": {
    "component" : "redis",
}

or

selector:
    component: redis

this selector (respectively in json or yaml format) is equivalent to component=redis or component in (redis).

Job and other new resources

Newer resources, such as job, support set-based requirements as well.

selector:
  matchLabels:
    component: redis
  matchExpressions:
    - {key: tier, operator: In, values: [cache]}
    - {key: environment, operator: NotIn, values: [dev]}

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". matchExpressions is a list of pod selector requirements. Valid operators include In, NotIn, Exists, and DoesNotExist. The values set must be non-empty in the case of In and NotIn. All of the requirements, from both matchLabels and matchExpressions are ANDed together -- they must all be satisfied in order to match.

Analytics