AIRPORT-BASESTATION-3-MIB

AIRPORT-BASESTATION-3-MIB

DEFINITIONS ::= BEGIN

	IMPORTS
		enterprises, MODULE-IDENTITY, OBJECT-TYPE, IpAddress
			FROM SNMPv2-SMI
		PhysAddress
			FROM RFC1213-MIB
    	DisplayString
			FROM SNMPv2-TC;

baseStation3 MODULE-IDENTITY
    LAST-UPDATED "200301160001Z"
    ORGANIZATION "Apple Computer, Inc."
    CONTACT-INFO
            "       Apple Computer, Inc.
            Postal: 1 Infinite Loop
                    Cupertino, CA  95014
                    USA
               Tel: +1-408-996-1010"
    DESCRIPTION
            "Management information base in SMI v2 for the AirPort and AirPort Extreme Base Station (v3)."
    ::= { airport 3 }

apple OBJECT IDENTIFIER ::= { enterprises 63 }

airport OBJECT IDENTIFIER ::= { apple 501 }

-- (c) 2003 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, 
-- AirPort, and AirPort Extreme are trademarks of Apple Computer, Inc., 
-- registered in the U.S. and other countries. 

-- system configuration information

abs3SysConf OBJECT IDENTIFIER ::= { baseStation3 1 }

sysConfName  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Configured name of the AirPort Base Station."
    ::= { abs3SysConf 1 }

sysConfContact  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Configured name of the contact for the AirPort Base Station."
    ::= { abs3SysConf 2 }

sysConfLocation  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Configured name of where the AirPort Base Station is located."
    ::= { abs3SysConf 3 }
    
sysConfUptime	OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Length of time, in seconds, the AirPort Base Station has been running."
	::= { abs3SysConf 4 }
	
sysConfFirmwareVersion	OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Current firmware revision running on the AirPort Base Station."
	::= { abs3SysConf 5 }

-- TBD: additional configuration/status information
--		NAT state
--		DHCP state
--		briding state
--		product information (Snow, Extreme, etc)
-- 		USB information
--			list of attached devices, each one with status info
-- 		print server information
--			list of printers, each one with number of jobs received, 
--		logging


-- information about wireless clients

wireless OBJECT IDENTIFIER ::= { baseStation3 2 }

wirelessNumber OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of wireless clients associated with this AP."
	::= { wireless 1 }
	
wirelessClientsTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF WirelessClient
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"A list of wireless clients."
	::= { wireless 2 }

wirelessClient OBJECT-TYPE
	SYNTAX		WirelessClient
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION "A wireless client entry containing information about the client."
	INDEX { wirelessPhysAddress }
	::= { wirelessClientsTable 1 }
	
WirelessClient ::= SEQUENCE {

	-- the following information is provided by the access point driver (i.e., this is information it knows about the wireless STA)

		wirelessPhysAddress
			PhysAddress,
		wirelessType
			INTEGER,
		wirelessDataRates
			DisplayString,
		wirelessTimeAssociated
			INTEGER,
		wirelessLastRefreshTime
			INTEGER,

	-- the following information is obtained from the client, via a communication protocol between the AP and STA/WDS node
	-- 		and therefore, it is only supported by Apple STA/AP drivers 
	-- the information is refreshed once each time it is requested, but since some STAs will not implement this
	--		protocol, we provide an indication of how long it has been since the data was refreshed.  if that value
	--		is zero, then it means we have never obtained this information from the clients

		wirelessStrength
			INTEGER,
		wirelessNoise
			INTEGER,
		wirelessRate
			INTEGER,
		wirelessNumRX
			INTEGER,
		wirelessNumTX
			INTEGER,
		wirelessNumRXErrors
			INTEGER,
		wirelessNumTXErrors
			INTEGER

	}

wirelessPhysAddress OBJECT-TYPE
	SYNTAX		PhysAddress
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The MAC address of the wireless client."
	::= { wirelessClient 1 }
			
wirelessType OBJECT-TYPE
	SYNTAX		INTEGER { 
		sta(1),
		wds(2)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The type of wireless client node."
	::= { wirelessClient 2 }

wirelessDataRates OBJECT-TYPE
	SYNTAX		DisplayString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The data rates available for the wireless client."
	::= { wirelessClient 3 }

wirelessTimeAssociated OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The time that this wireless client associated."
	::= { wirelessClient 4 }

wirelessLastRefreshTime OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of seconds since the client reported its statistics to the AirPort Base Station (-1 if never refreshed or not supported)."
	::= { wirelessClient 5 }

wirelessStrength OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The signal strength reported by the wireless client (-1 if not supported)."
	::= { wirelessClient 6 }

wirelessNoise OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The noise reported by the wireless client (-1 if not supported)."
	::= { wirelessClient 7 }

wirelessRate OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The rate reported by the wireless client (-1 if not supported)."
	::= { wirelessClient 8 }

wirelessNumRX OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of packets received reported by the wireless client (-1 if not supported)."
	::= { wirelessClient 9 }

wirelessNumTX OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of packets transmitted reported by this wireless client (-1 if not supported)."
	::= { wirelessClient 10 }

wirelessNumRXErrors OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of errors encountered receiving packets reported by this wireless client (-1 if not supported)."
	::= { wirelessClient 11 }

wirelessNumTXErrors OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of errors encountered transmitting packets reported by this wireless client (-1 if not supported)."
	::= { wirelessClient 12 }

-- information about DHCP server

dhcpServer OBJECT IDENTIFIER ::= { baseStation3 3 }

dhcpNumber OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of DHCP clients served by the AirPort base station."
	::= { dhcpServer 1 }
	
dhcpClientsTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF DHCPClient
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"A list of DHCP clients."
	::= { dhcpServer 2 }

dhcpClient OBJECT-TYPE
	SYNTAX		DHCPClient
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION "A DHCP client entry containing information about the client."
	INDEX { dhcpPhysAddress }
	::= { dhcpClientsTable 1 }
	
DHCPClient ::= SEQUENCE {

		-- indexed by phys address, since it is unique per client

		dhcpPhysAddress
			PhysAddress,
		dhcpIpAddress
			IpAddress,
		dhcpClientID
			OCTET STRING,
		dhcpLeaseTime
			INTEGER
	}
	
dhcpPhysAddress OBJECT-TYPE
	SYNTAX		PhysAddress
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The MAC address of the DHCP client."
	::= { dhcpClient 1 }

dhcpIpAddress OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The IP address of the DHCP client."
	::= { dhcpClient 2 }

dhcpClientID OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The DHCP client ID of the DHCP client."
	::= { dhcpClient 3 }

dhcpLeaseTime OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The lease time for the DHCP client."
	::= { dhcpClient 4 }


-- physical interfaces table

physicalInterfaces OBJECT IDENTIFIER ::= { baseStation3 4 }

physicalInterfaceCount OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of physical interfaces on the AirPort Base Station.  This is different than the number of IP interfaces, as reported by the system MIBs, as the AirPort's bridge typically multiplexes two or more interfaces."
	::= { physicalInterfaces 1 }
	
physicalInterfacesTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF PhysicalInterface
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"List of physical interfaces on the AirPort Base Station."
	::= { physicalInterfaces 2 }
	
physicalInterface	OBJECT-TYPE
	SYNTAX		PhysicalInterface
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Entry containing data about the physical interface on the AirPort Base Station."
	INDEX		{ physicalInterfaceIndex }
	::= { physicalInterfacesTable 1 }

PhysicalInterface ::= SEQUENCE {
	physicalInterfaceIndex		INTEGER,
	physicalInterfaceName		OCTET STRING,
	physicalInterfaceUnit		INTEGER,
	physicalInterfaceSpeed		INTEGER,
	physicalInterfaceState		INTEGER,
	physicalInterfaceDuplex		INTEGER,
	physicalInterfaceNumTX		INTEGER,
	physicalInterfaceNumRX		INTEGER,
	physicalInterfaceNumTXError	INTEGER,
	physicalInterfaceNumRXError	INTEGER
}

physicalInterfaceIndex OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "A unique value for each physical interface.  Its value ranges between 1 and the value of physicalInterfaceCount."
	::= { physicalInterface 1 }

physicalInterfaceName OBJECT-TYPE
	SYNTAX		OCTET STRING
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The name of the physical interface."
	::= { physicalInterface 2 }

physicalInterfaceUnit OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The unit number of the physical interface."
	::= { physicalInterface 3 }

physicalInterfaceSpeed OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The speed, in bits per second, of the interface."
	::= { physicalInterface 4 }

physicalInterfaceState OBJECT-TYPE
	SYNTAX		INTEGER { 
		linkDown(0),
		linkUp(1)
	}	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The status of this interface."
	::= { physicalInterface 5 }

physicalInterfaceDuplex OBJECT-TYPE
	SYNTAX		INTEGER { 
		half(0),
		full(1)
	}	
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The duplex-state of this interface."
	::= { physicalInterface 6 }

physicalInterfaceNumTX OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of packets transmitted on this interface."
	::= { physicalInterface 7 }

physicalInterfaceNumRX OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of packets received on this interface."
	::= { physicalInterface 8 }

physicalInterfaceNumTXError OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of errors during transmission on this interface."
	::= { physicalInterface 9 }

physicalInterfaceNumRXError OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION "The number of errors during reception on this interface."
	::= { physicalInterface 10 }

END