ALTIGA-SEP-STATS-MIB

-- *------------------------------------------------------------------
-- * ALTIGA-SEP-STATS-MIB.my: Cisco VPN3000 Series SEP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------

ALTIGA-SEP-STATS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32
         FROM SNMPv2-SMI
      RowStatus, DisplayString
         FROM SNMPv2-TC
      OBJECT-GROUP, MODULE-COMPLIANCE
         FROM SNMPv2-CONF
      alStatsSep, alSepGroup
         FROM ALTIGA-MIB
      alSepMibModule
         FROM ALTIGA-GLOBAL-REG;

   altigaSepStatsMibModule MODULE-IDENTITY
      LAST-UPDATED   "200303270000Z"
      ORGANIZATION   "Cisco Systems, Inc."
      CONTACT-INFO
         "Cisco Systems
          170 W Tasman Drive
          San Jose, CA  95134
          USA

          Tel: +1 800 553-NETS
          E-mail: cs-cvpn3000@cisco.com"

      DESCRIPTION
         "The Cisco VPN 3000 Series SEP Statistics MIB models counters
          and objects that are of management interest for the SEP 
          hardware.
         
          Acronyms
          The following acronyms are used in this document:

            MIB:        Management Information Base

            RSA:        Rivest, Shamir, and Adelman

            SEP:        Scalable Encryption Processor

         "
        REVISION "200303270000Z"
        DESCRIPTION
                 "Added new enum value to alSepModuleStatsType
                  and alSepModuleStatsState."

        REVISION "200209051300Z"
        DESCRIPTION
                "Added module compliance."

        REVISION "200207100000Z"
        DESCRIPTION
                "Updated with new header"

      ::= { alSepMibModule 2 }

-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++

-- per SEP statistics 

alSepModuleStatsTable      OBJECT-TYPE
   SYNTAX         SEQUENCE OF AlSepModuleStatsEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
      "List of SEPs modules found."
   ::= { alStatsSep 2 }

alSepModuleStatsEntry   OBJECT-TYPE
   SYNTAX         AlSepModuleStatsEntry
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
      "An entry in the alSepModuleStatsTable."
   INDEX       { alSepModuleStatsSlotNum }
   ::= { alSepModuleStatsTable 1 }

AlSepModuleStatsEntry ::= SEQUENCE {
   alSepModuleStatsRowStatus              RowStatus,
   alSepModuleStatsSlotNum                INTEGER,
   alSepModuleStatsType                   INTEGER,
   alSepModuleStatsState                  INTEGER,
   alSepModuleStatsDspCodeVersion         DisplayString,
   alSepModuleStatsHashOutboundPackets    Counter32,
   alSepModuleStatsHashOutboundOctets     Counter32,
   alSepModuleStatsHashInboundPackets     Counter32,
   alSepModuleStatsHashInboundOctets      Counter32,
   alSepModuleStatsEncPackets             Counter32,
   alSepModuleStatsEncOctets              Counter32,
   alSepModuleStatsDecPackets             Counter32,
   alSepModuleStatsDecOctets              Counter32,
   alSepModuleStatsHashEncPackets         Counter32,
   alSepModuleStatsHashDecPackets         Counter32,
   alSepModuleStatsCryptoTransformsTotal  Counter32,
   alSepModuleStatsPacketDrops            Counter32,
   alSepModuleStatsRandRequests           Counter32,
   alSepModuleStatsRandReplens            Counter32,
   alSepModuleStatsRandBytesAvail         Integer32,
   alSepModuleStatsRandCacheEmpty         Counter32,
   alSepModuleStatsDHKeysGenerated        Counter32,
   alSepModuleStatsDHDerivedSecretKeys    Counter32,
   alSepModuleStatsRSASignings            Counter32,
   alSepModuleStatsRSAVerifications       Counter32,
   alSepModuleStatsRSAEncPackets          Counter32,
   alSepModuleStatsRSAEncOctets           Counter32,
   alSepModuleStatsRSADecPackets          Counter32,
   alSepModuleStatsRSADecOctets           Counter32,
   alSepModuleStatsDSAKeysGenerated       Counter32,
   alSepModuleStatsDSASignings            Counter32,
   alSepModuleStatsDSAVerifications       Counter32,
   alSepModuleStatsRSAKeysGenerated       Counter32
}

alSepModuleStatsRowStatus  OBJECT-TYPE
   SYNTAX         RowStatus
   MAX-ACCESS     read-create
   STATUS         current
   DESCRIPTION
      "The status of this row."
   ::= { alSepModuleStatsEntry 1 }

alSepModuleStatsSlotNum    OBJECT-TYPE
   SYNTAX         INTEGER(1..4)
   MAX-ACCESS     not-accessible
   STATUS         current
   DESCRIPTION
      "The physical slot this SEP is connected to."
   ::= { alSepModuleStatsEntry 2 }


alSepModuleStatsType    OBJECT-TYPE
   SYNTAX INTEGER {
                     cryptSet(1),
                     cryptIc(2),
                     bcm582x(3)
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "Indicates the type of HW engine used to perform the
       cryptographic transforms.
       cryptSet: First generation of Hardware Cryptographic Processor.
       cryptIc: Cryptographic Integrated Circuit.
       bcm582x: BroadCom 582x series Hardware Cryptographic Products.
      "
   ::= { alSepModuleStatsEntry 3 }

alSepModuleStatsState      OBJECT-TYPE
   SYNTAX INTEGER {
                     sepNotFound(1),
                     sepFound(2),
                     sepDiagFailure(3),
                     sepNotOperational(4),
                     sepLoading(5),
                     sepInitializing(6),
                     sepOperational(7),
                     sepDisabled(8)
                  }
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The functional state of this SEP.
      sepNotFound: SEP is not found.
      sepFound: SEP is found.
      sepDiagFailure: SEP dialog fail.
      sepNotOperational: SEP is not operational.
      sepLoading: SEP is loading data.
      sepInitializing: SEP is initializing.
      sepOperational: SEP is operational.
      sepDisabled: SEP is disabled.
      "
   ::= { alSepModuleStatsEntry 4 }

alSepModuleStatsDspCodeVersion   OBJECT-TYPE
   SYNTAX         DisplayString
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The version of DSP microcode running on this SEP."
   ::= { alSepModuleStatsEntry 5 }

alSepModuleStatsHashOutboundPackets OBJECT-TYPE
   SYNTAX            Counter32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
      "The number of outbound authentication-only packets processed
       by this SEP."
   ::= { alSepModuleStatsEntry 6 }

alSepModuleStatsHashOutboundOctets     OBJECT-TYPE
   SYNTAX            Counter32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
      "The number of outbound octets authenticated by this SEP."
   ::= { alSepModuleStatsEntry 7 }

alSepModuleStatsHashInboundPackets  OBJECT-TYPE
   SYNTAX            Counter32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
      "The number of inbound authentication-only packets processed
       by this SEP."
   ::= { alSepModuleStatsEntry 8 }

alSepModuleStatsHashInboundOctets   OBJECT-TYPE
   SYNTAX            Counter32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
      "The number of inbound octets authenticated by this SEP."
   ::= { alSepModuleStatsEntry 9 }

alSepModuleStatsEncPackets OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of outbound encryption-only packets processed by
       this SEP."
   ::= { alSepModuleStatsEntry 10 }

alSepModuleStatsEncOctets     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of outbound octets encrypted by this SEP."
   ::= { alSepModuleStatsEntry 11 }

alSepModuleStatsDecPackets OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of inbound decryption-only packets processed by
       this SEP."
   ::= { alSepModuleStatsEntry 12 }

alSepModuleStatsDecOctets     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of inbound octets decrypted by this SEP."
   ::= { alSepModuleStatsEntry 13 }

alSepModuleStatsHashEncPackets   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of combined outbound hash/encrypt packets processed
       by this SEP."
   ::= { alSepModuleStatsEntry 14 }

alSepModuleStatsHashDecPackets   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of combined inbound hash/decrypt packets processed
       by this SEP."
   ::= { alSepModuleStatsEntry 15 }

alSepModuleStatsCryptoTransformsTotal  OBJECT-TYPE
   SYNTAX            Counter32
   MAX-ACCESS        read-only
   STATUS            current
   DESCRIPTION
      "The total number of hash, encryption, decryption,
       hash/encrypt, and hash/decrypt transforms
       performed by this SEP."
   ::= { alSepModuleStatsEntry 16 }

alSepModuleStatsPacketDrops      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of packets intended for SEP processing,
       dropped due to the SEP ring being full."
   ::= { alSepModuleStatsEntry 17 }

alSepModuleStatsRandRequests     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of random # requests made to the SEP."
   ::= { alSepModuleStatsEntry 18 }

alSepModuleStatsRandReplens      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of random # requests fulfilled by the SEP."
   ::= { alSepModuleStatsEntry 19 }

alSepModuleStatsRandBytesAvail   OBJECT-TYPE
   SYNTAX         Integer32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of random bytes currently cached on the Host."
   ::= { alSepModuleStatsEntry 20 }

alSepModuleStatsRandCacheEmpty   OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a random # request came in and
       we had no SEP generated random #'s available on the host."
   ::= { alSepModuleStatsEntry 21 }

alSepModuleStatsDHKeysGenerated  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a new Diffie Hellman key pair has been
       generated by a SEP."
   ::= { alSepModuleStatsEntry 22 }

alSepModuleStatsDHDerivedSecretKeys  OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a SEP has derived the Diffie Hellman
       secret key."
   ::= { alSepModuleStatsEntry 23 }

alSepModuleStatsRSASignings      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times an RSA Digital Signature has been
       generated by a SEP."
   ::= { alSepModuleStatsEntry 24 }

alSepModuleStatsRSAVerifications OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times an RSA Digital Signature has been
       verified by a SEP."
   ::= { alSepModuleStatsEntry 25 }

alSepModuleStatsRSAEncPackets OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of packets RSA-encrypted by this SEP."
   ::= { alSepModuleStatsEntry 26 }

alSepModuleStatsRSAEncOctets     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of octets RSA-encrypted by this SEP."
   ::= { alSepModuleStatsEntry 27 }

alSepModuleStatsRSADecPackets OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of packets RSA-decrypted by this SEP."
   ::= { alSepModuleStatsEntry 28 }

alSepModuleStatsRSADecOctets     OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
          "The number of octets RSA-decrypted by this SEP."
   ::= { alSepModuleStatsEntry 29 }

alSepModuleStatsDSAKeysGenerated OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a new DSA Key pair has been
       generated by a SEP."
   ::= { alSepModuleStatsEntry 30 }

alSepModuleStatsDSASignings      OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a DSA Digital Signature has been
       generated by a SEP."
   ::= { alSepModuleStatsEntry 31 }

alSepModuleStatsDSAVerifications OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a DSA Digital Signature has been
       verified by a SEP."
   ::= { alSepModuleStatsEntry 32 }

alSepModuleStatsRSAKeysGenerated OBJECT-TYPE
   SYNTAX         Counter32
   MAX-ACCESS     read-only
   STATUS         current
   DESCRIPTION
      "The number of times a new RSA Key pair has been
       generated by a SEP."
   ::= { alSepModuleStatsEntry 33 }

altigaSepStatsMibConformance OBJECT IDENTIFIER 
   ::= { altigaSepStatsMibModule 1 }

altigaSepStatsMibCompliances OBJECT IDENTIFIER 
   ::= { altigaSepStatsMibConformance 1 }

altigaSepStatsMibCompliance MODULE-COMPLIANCE
   STATUS         current
   DESCRIPTION
      "The compliance statement for agents which 
       implement the Altiga SEP Statistics MIB."
   MODULE
   MANDATORY-GROUPS { 
      altigaSepStatsGroup
   }
   ::= { altigaSepStatsMibCompliances 1 }

altigaSepStatsGroup OBJECT-GROUP
   OBJECTS
   {
      alSepModuleStatsRowStatus,
      alSepModuleStatsType,
      alSepModuleStatsState,           
      alSepModuleStatsDspCodeVersion,     
      alSepModuleStatsHashOutboundPackets,    
      alSepModuleStatsHashOutboundOctets,    
      alSepModuleStatsHashInboundPackets,     
      alSepModuleStatsHashInboundOctets,     
      alSepModuleStatsEncPackets,      
      alSepModuleStatsEncOctets,       
      alSepModuleStatsDecPackets,      
      alSepModuleStatsDecOctets,       
      alSepModuleStatsHashEncPackets,  
      alSepModuleStatsHashDecPackets,  
      alSepModuleStatsCryptoTransformsTotal, 
      alSepModuleStatsPacketDrops,     
      alSepModuleStatsRandRequests,    
      alSepModuleStatsRandReplens,     
      alSepModuleStatsRandBytesAvail,  
      alSepModuleStatsRandCacheEmpty,
      alSepModuleStatsDHKeysGenerated,
      alSepModuleStatsDHDerivedSecretKeys,
      alSepModuleStatsRSASignings,
      alSepModuleStatsRSAVerifications,
      alSepModuleStatsRSAEncPackets,
      alSepModuleStatsRSAEncOctets,
      alSepModuleStatsRSADecPackets,
      alSepModuleStatsRSADecOctets,
      alSepModuleStatsDSAKeysGenerated,
      alSepModuleStatsDSASignings,
      alSepModuleStatsDSAVerifications,
      alSepModuleStatsRSAKeysGenerated
   }  
   STATUS   current
   DESCRIPTION
      "The objects for the SEP Module statistics."
   ::= { alSepGroup 2 }

END