AT-FIREWALL-MIB

-- ============================================================================
-- AT-ETH.MIB, Allied Telesis enterprise MIB: FIREWALL module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
-- 
-- ============================================================================

AT-FIREWALL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    NOTIFICATION-TYPE
    	FROM SNMPv2-SMI

    DisplayString,
    TruthValue
        FROM SNMPv2-TC

	ifIndex
		FROM IF-MIB

	modules,
	DisplayStringUnsized
		FROM AT-SMI-MIB
;
                                 
firewall	MODULE-IDENTITY
	    LAST-UPDATED "200606281222Z"
    	ORGANIZATION "Allied Telesis, Inc"
		CONTACT-INFO
		    "http://www.alliedtelesis.com"
		DESCRIPTION
		    "This MIB file contains definitions of managed objects for the
	    	FIREWALL module. "

	    REVISION "200606281222Z"
		DESCRIPTION
			"Initial Revision"

::= { modules 77 }
									  
-- The firewall group. This consists of a single variable which is the last
-- TRAP message sent.

-- The last TRAP message sent from the firewall.
firewallTrapMessage OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The last message sent in a firewall TRAP. This variable is really
            just a placeholder for the object sent in the firewall TRAP, but can
            be read independently if required. Note however that a new TRAP will
            cause this variable to be overwritten."
    ::= { firewall 1 }

firewallTraps 		OBJECT IDENTIFIER ::= { firewall 0 }	
firewallAttackTrap 	NOTIFICATION-TYPE
    OBJECTS   	{ firewallTrapMessage }
	STATUS		current
    DESCRIPTION
                "A firewall trap is generated when the firewall detects an intrusion or attack
                and notifies the router manager. Firewall trap notifications are enabled with
                the command ENABLE FIREWALL NOTIFY=SNMP."
    ::= { firewallTraps 1 }

firewallSessionsStatistics OBJECT IDENTIFIER ::= { firewall 2 }
totalNumberOfSessions OBJECT-TYPE
	SYNTAX 		Gauge32
	MAX-ACCESS  read-only
	STATUS  	mandatory
	DESCRIPTION
				"The total number of sessions going through the firewall. It will be the sum of the 
				number of sessions on all individual nodes."
	::= { firewallSessionsStatistics 1 }

numberOfSessionsPerNodeCountingStatus OBJECT-TYPE
	SYNTAX 		INTEGER {
				enabled(1),  
				disabled(2)
				}
	MAX-ACCESS 	read-write
	STATUS 		mandatory
	DESCRIPTION
				"The status of counting the number of sessions per node, ie, when
				this particular ferture is on, the status will be enabled, other
				wise it will be disabled, which is the default status."
	::= { firewallSessionsStatistics 2 }

numberOfSessionsPerNodeTable OBJECT-TYPE
	SYNTAX 		SEQUENCE OF NumberOfSessionsPerNodeEntry
	MAX-ACCESS 	not-accessible
	STATUS 		current
	DESCRIPTION
				"This is a table of nodes in the network with their corresponding
				ip address and number of sessions"
	::= { firewallSessionsStatistics 3 }

numberOfSessionsPerNodeEntry OBJECT-TYPE
	SYNTAX 		NumberOfSessionsPerNodeEntry
	MAX-ACCESS	not-accessible
	STATUS 		current
	DESCRIPTION
				"An entry includes the information about a node and numbers of 
				sessions belongs to it."
	INDEX { nodeIpAddress }
	::= { numberOfSessionsPerNodeTable 1 }

NumberOfSessionsPerNodeEntry ::=
	SEQUENCE{
		nodeIpAddress     			IpAddress,
		numberOfSessionsPerNode   	Gauge32
	}

nodeIpAddress OBJECT-TYPE
	SYNTAX 		IpAddress
	MAX-ACCESS	read-only
	STATUS 		current
	DESCRIPTION
				"The ip address of each node that has firewall limit rules 
				attached and needs to be monitored"
	::= { numberOfSessionsPerNodeEntry 1 }

numberOfSessionsPerNode OBJECT-TYPE
	SYNTAX 		Gauge32
	MAX-ACCESS 	read-only
	STATUS 		current
	DESCRIPTION
				"Number of active sessions created by the corresponding node"
	::= { numberOfSessionsPerNodeEntry 2 }

END