EasyPen_alpha_1.0.7解压后运行报错

[lhl123github]

EasyPen_alpha_1.0.7解压后报
[2022-10-20 09:54:25,105] [log_output] [43] EasyPen alpha 1.0.7 start, wxpython version is 4.2.0 msw (phoenix) wxWidgets 3.2.0
[2022-10-20 09:54:32,215] [log_output] [43] Nmap missing, please install nmap or add it to $PATH
[2022-10-20 09:55:57,707] [log_output] [43] Brute domain: 172.40.12.228, pid: 8116
但是运行电脑是安装了nmap的，是不是需要修改环境变量呢？

[lijiejie]

你直接 Win +R， 打开cmd，能直接运行nmap吗？ 可能是没有加到环境变量。
可以把nmap的路径加到用户环境变量中试试

[lhl123github]

可以直接运行，已经添加到系统环境变量了。这个./tools/nmap/文件夹里边只有一个.gitkeep正常吗？

[lhl123github]

Microsoft Windows [版本 10.0.22623.746]
(c) Microsoft Corporation。保留所有权利。

C:\Users\xxxxxxx>nmap -h
Nmap 7.93 ( https://nmap.org )
Usage: nmap [Scan Type(s)] [Options] {target specification}
TARGET SPECIFICATION:
Can pass hostnames, IP addresses, networks, etc.
Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
-iL : Input from list of hosts/networks
-iR : Choose random targets
--exclude <host1[,host2][,host3],...>: Exclude hosts/networks
--excludefile <exclude_file>: Exclude list from file
HOST DISCOVERY:
-sL: List Scan - simply list targets to scan
-sn: Ping Scan - disable port scan
-Pn: Treat all hosts as online -- skip host discovery
-PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports
-PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
-PO[protocol list]: IP Protocol Ping
-n/-R: Never do DNS resolution/Always resolve [default: sometimes]
--dns-servers <serv1[,serv2],...>: Specify custom DNS servers
--system-dns: Use OS's DNS resolver
--traceroute: Trace hop path to each host
SCAN TECHNIQUES:
-sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
-sU: UDP Scan
-sN/sF/sX: TCP Null, FIN, and Xmas scans
--scanflags : Customize TCP scan flags
-sI <zombie host[:probeport]>: Idle scan
-sY/sZ: SCTP INIT/COOKIE-ECHO scans
-sO: IP protocol scan
-b : FTP bounce scan
PORT SPECIFICATION AND SCAN ORDER:
-p : Only scan specified ports
Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080,S:9
--exclude-ports : Exclude the specified ports from scanning
-F: Fast mode - Scan fewer ports than the default scan
-r: Scan ports sequentially - don't randomize
--top-ports : Scan most common ports
--port-ratio : Scan ports more common than
SERVICE/VERSION DETECTION:
-sV: Probe open ports to determine service/version info
--version-intensity : Set from 0 (light) to 9 (try all probes)
--version-light: Limit to most likely probes (intensity 2)
--version-all: Try every single probe (intensity 9)
--version-trace: Show detailed version scan activity (for debugging)
SCRIPT SCAN:
-sC: equivalent to --script=default
--script=: is a comma separated list of
directories, script-files or script-categories
--script-args=<n1=v1,[n2=v2,...]>: provide arguments to scripts
--script-args-file=filename: provide NSE script args in a file
--script-trace: Show all data sent and received
--script-updatedb: Update the script database.
--script-help=: Show help about scripts.
is a comma-separated list of script-files or
script-categories.
OS DETECTION:
-O: Enable OS detection
--osscan-limit: Limit OS detection to promising targets
--osscan-guess: Guess OS more aggressively
TIMING AND PERFORMANCE:
Options which take are in seconds, or append 'ms' (milliseconds),
's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m).
-T<0-5>: Set timing template (higher is faster)
--min-hostgroup/max-hostgroup : Parallel host scan group sizes
--min-parallelism/max-parallelism : Probe parallelization
--min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout : Specifies
probe round trip time.
--max-retries : Caps number of port scan probe retransmissions.
--host-timeout : Give up on target after this long
--scan-delay/--max-scan-delay : Adjust delay between probes
--min-rate : Send packets no slower than per second
--max-rate : Send packets no faster than per second
FIREWALL/IDS EVASION AND SPOOFING:
-f; --mtu : fragment packets (optionally w/given MTU)
-D <decoy1,decoy2[,ME],...>: Cloak a scan with decoys
-S <IP_Address>: Spoof source address
-e : Use specified interface
-g/--source-port : Use given port number
--proxies <url1,[url2],...>: Relay connections through HTTP/SOCKS4 proxies
--data : Append a custom payload to sent packets
--data-string : Append a custom ASCII string to sent packets
--data-length : Append random data to sent packets
--ip-options : Send packets with specified ip options
--ttl : Set IP time-to-live field
--spoof-mac <mac address/prefix/vendor name>: Spoof your MAC address
--badsum: Send packets with a bogus TCP/UDP/SCTP checksum
OUTPUT:
-oN/-oX/-oS/-oG : Output scan in normal, XML, s|<rIpt kIddi3,
and Grepable format, respectively, to the given filename.
-oA : Output in the three major formats at once
-v: Increase verbosity level (use -vv or more for greater effect)
-d: Increase debugging level (use -dd or more for greater effect)
--reason: Display the reason a port is in a particular state
--open: Only show open (or possibly open) ports
--packet-trace: Show all packets sent and received
--iflist: Print host interfaces and routes (for debugging)
--append-output: Append to rather than clobber specified output files
--resume : Resume an aborted scan
--noninteractive: Disable runtime interactions via keyboard
--stylesheet <path/URL>: XSL stylesheet to transform XML output to HTML
--webxml: Reference stylesheet from Nmap.Org for more portable XML
--no-stylesheet: Prevent associating of XSL stylesheet w/XML output
MISC:
-6: Enable IPv6 scanning
-A: Enable OS detection, version detection, script scanning, and traceroute
--datadir : Specify custom Nmap data file location
--send-eth/--send-ip: Send using raw ethernet frames or IP packets
--privileged: Assume that the user is fully privileged
--unprivileged: Assume the user lacks raw socket privileges
-V: Print version number
-h: Print this help summary page.
EXAMPLES:
nmap -v -A scanme.nmap.org
nmap -v -sn 192.168.0.0/16 10.0.0.0/8
nmap -v -iR 10000 -Pn -p 80
SEE THE MAN PAGE (https://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES

[lijiejie]

程序打开后，你试试F5打开shell，
import subprocess; subprocess.check_output('where nmap', shell=True).strip()

看看有错误提示吗？

[lijiejie]

暂时还没有能复现这个问题，也可以试试管理员权限打开程序试试

[lhl123github]

import subprocess; subprocess.check_output('where nmap', shell=True).strip()
b'D:\\xb9\xa5\xb7\xc0\xb9\xa4\xbe\xdf\EasyPen_alpha_1.0.7 (1)\EasyPen_alpha_1.0.7\tools\nmap\nmap.exe'

没有报错呀

[lhl123github]

nmap安装路径就是D:\xb9\xa5\xb7\xc0\xb9\xa4\xbe\xdf\EasyPen_alpha_1.0.7 (1)\EasyPen_alpha_1.0.7\tools\nmap\

[lijiejie]

我这边处理修复一下，是因为你的路径中出现了空格引起的问题。

[lhl123github]

对的 昨天我也发现了 我发现存在空格 后来把中文路径跟空格都删除了就好了~ 谢谢大佬的工具~~~