default.yaml

# ===================================================================== #
# BASIC CONFIGURATION
# ===================================================================== #

# Arch: "default", "x86_64", "aarch64".
# "default" corresponds to the host architecture.
arch: "default"

# An image must support systemd and cloud-init.
# Ubuntu and Fedora are known to work.
# Default: none (must be specified)
images:
  # Try to use a local image first.
  - location: "~/Downloads/hirsute-server-cloudimg-amd64.img"
    arch: "x86_64"
  - location: "~/Downloads/hirsute-server-cloudimg-arm64.img"
    arch: "aarch64"

  # Download the file from the internet when the local file is missing.
  # Hint: run `limactl prune` to invalidate the "current" cache
  - location: "https://cloud-images.ubuntu.com/hirsute/current/hirsute-server-cloudimg-amd64.img"
    arch: "x86_64"
  - location: "https://cloud-images.ubuntu.com/hirsute/current/hirsute-server-cloudimg-arm64.img"
    arch: "aarch64"

# CPUs: if you see performance issues, try limiting cpus to 1.
# Default: 4
cpus: 4

# Memory size
# Default: "4GiB"
memory: "4GiB"

# Disk size
# Default: "100GiB"
disk: "100GiB"

# Expose host directories to the guest, the mount point might be accessible from all UIDs in the guest
# Default: none
mounts:
  - location: "~"
    # CAUTION: `writable` SHOULD be false for the home directory.
    # Setting `writable` to true is possible, but untested and dangerous.
    writable: false
  - location: "/tmp/lima"
    writable: true

ssh:
  # A localhost port of the host. Forwarded to port 22 of the guest.
  # Default: 0 (automatically assigned to a free port)
  localPort: 0
  # Load ~/.ssh/*.pub in addition to $LIMA_HOME/_config/user.pub .
  # This option is useful when you want to use other SSH-based
  # applications such as rsync with the Lima instance.
  # If you have an insecure key under ~/.ssh, do not use this option.
  # Default: true
  loadDotSSHPubKeys: true



# ===================================================================== #
# ADVANCED CONFIGURATION
# ===================================================================== #

containerd:
  # Enable system-wide (aka rootful)  containerd and its dependencies (BuildKit, Stargz Snapshotter)
  # Default: false
  system: false
  # Enable user-scoped (aka rootless) containerd and its dependencies
  # Default: true
  user: true
#  # Override containerd archive
#  # Default: hard-coded URL with hard-coded digest (see the output of `limactl info | jq .defaultTemplate.containerd.archives`)
#  archives:
#    - location: "~/Downloads/nerdctl-full-X.Y.Z-linux-amd64.tar.gz"
#      arch: "x86_64"
#      digest: "sha256:..."

# Provisioning scripts need to be idempotent because they might be called
# multiple times, e.g. when the host VM is being restarted.
# provision:
#   # `system` is executed with the root privilege
#   - mode: system
#     script: |
#       #!/bin/bash
#       set -eux -o pipefail
#       export DEBIAN_FRONTEND=noninteractive
#       apt-get install -y vim
#   # `user` is executed without the root privilege
#   - mode: user
#     script: |
#       #!/bin/bash
#       set -eux -o pipefail
#       cat <<EOF > ~/.vimrc
#       set number
#       EOF

# probes:
#  # Only `readiness` probes are supported right now.
#  - mode: readiness
#    description: vim to be installed
#    script: |
#       #!/bin/bash
#       set -eux -o pipefail
#       if ! timeout 30s bash -c "until command -v vim; do sleep 3; done"; then
#         echo >&2 "vim is not installed yet"
#         exit 1
#       fi
#    hint: |
#      vim was not installed in the guest. Make sure the package system is working correctly.
#      Also see "/var/log/cloud-init-output.log" in the guest.

# ===================================================================== #
# FURTHER ADVANCED CONFIGURATION
# ===================================================================== #

firmware:
  # Use legacy BIOS instead of UEFI.
  # Default: false
  legacyBIOS: false

video:
  # QEMU display, e.g., "none", "cocoa", "sdl".
  # As of QEMU v5.2, enabling this is known to have negative impact
  # on performance on macOS hosts: https://gitlab.com/qemu-project/qemu/-/issues/334
  # Default: "none"
  display: "none"

# The instance can get routable IP addresses from the vmnet framework using
# https://github.com/lima-vm/vde_vmnet.
networks:
  # Lima can manage daemons for networks defined in $LIMA_HOME/_config/networks.yaml
  # automatically. Both vde_switch and vde_vmnet binaries must be installed into
  # secure locations only alterable by the "root" user.
  # - lima: shared
  #   # MAC address of the instance; lima will pick one based on the instance name,
  #   # so DHCP assigned ip addresses should remain constant over instance restarts.
  #   macAddress: ""
  #   # Interface name, defaults to "lima0", "lima1", etc.
  #   interface: ""
  #
  # Lima can also connect to "unmanaged" vde networks addressed by "vnl". This
  # means that the daemons will not be controlled by Lima, but must be started
  # before the instance.  The interface type (host, shared, or bridged) is
  # configured in vde_vmnet and not in lima.
  # vnl (virtual network locator) points to the vde_switch socket directory,
  # optionally with vde:// prefix
  # - vnl: "vde:///var/run/vde.ctl"
  #   # VDE Switch port number (not TCP/UDP port number). Set to 65535 for PTP mode.
  #   # Default: 0
  #   switchPort: 0
  #   # MAC address of the instance; lima will pick one based on the instance name,
  #   # so DHCP assigned ip addresses should remain constant over instance restarts.
  #   macAddress: ""
  #   # Interface name, defaults to "lima0", "lima1", etc.
  #   interface: ""

# Port forwarding rules. Forwarding between ports 22 and ssh.localPort cannot be overridden.
# Rules are checked sequentially until the first one matches.
# portForwards:
#   - guestPort: 443
#     hostIP: "0.0.0.0" # overrides the default value "127.0.0.1"; allows privileged port forwarding
#   # default: hostPort: 443 (same as guestPort)
#   # default: guestIP: "127.0.0.1" (also matches bind addresses "0.0.0.0", "::", and "::1")
#   # default: proto: "tcp" (only valid value right now)
#   - guestPortRange: [4000, 4999]
#     hostIP:  "0.0.0.0" # overrides the default value "127.0.0.1"
#   # default: hostPortRange: [4000, 4999] (must specify same number of ports as guestPortRange)
#   - guestPort: 80
#     hostPort: 8080 # overrides the default value 80
#   - guestIP: "127.0.0.2" # overrides the default value "127.0.0.1"
#     hostIP: "127.0.0.2" # overrides the default value "127.0.0.1"
#   # default: guestPortRange: [1, 65535]
#   # default: hostPortRange: [1, 65535]
#   - guestPort: 8888
#     ignore: true (don't forward this port)
#   # Lima internally appends this fallback rule at the end:
#   - guestIP: "127.0.0.1"
#     guestPortRange: [1, 65535]
#     hostIP: "127.0.0.1"
#     hostPortRange: [1, 65535]
#   # Any port still not matched by a rule will not be forwarded (ignored)

# Extra environment variables that will be loaded into the VM at start up.
# These variables are consumed by internal init scripts, and also added
# to /etc/environment.
# If you set any of "ftp_proxy", "http_proxy", "https_proxy", or "no_proxy", then
# Lima will automatically set an uppercase variant to the same value as well.
# env:
#   KEY: value

# The host agent implements a DNS server that looks up host names on the host
# using the local system resolver. This means changing VPN and network settings
# are reflected automatically into the guest, including conditional forward,
# and mDNS lookup:
# Default: true
useHostResolver: true

# If useHostResolver is false, then the following rules apply for configuring dns:
# Explicitly set DNS addresses for qemu user-mode networking. By default qemu picks *one*
# nameserver from the host config and forwards all queries to this server. On macOS
# Lima adds the nameservers configured for the "en0" interface to the list. In case this
# still doesn't work (e.g. VPN setups), the servers can be specified here explicitly.
# If nameservers are specified here, then the "en0" configuration will be ignored.
# dns:
# - 1.1.1.1
# - 1.0.0.1

# ===================================================================== #
# END OF TEMPLATE
# ===================================================================== #