forked from coolsnowwolf/lede
/
README
65 lines (40 loc) · 3.39 KB
/
README
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
Welcome to Lean's git source of OpenWrt and packages
中文：如何编译自己需要的 OpenWrt 固件
注意：
1. 不要用 root 用户 git 和编译！！！
2. 国内用户编译前最好准备好梯子
3. 默认登陆IP 192.168.1.1, 密码 password
编译命令如下:
1. 首先装好 Ubuntu 64bit，推荐 Ubuntu 14 LTS x64
2. 命令行输入 sudo apt-get update ，然后输入
sudo apt-get -y install build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch python3.5 unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs git-core gcc-multilib p7zip p7zip-full msmtp libssl-dev texinfo libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint device-tree-compiler g++-multilib linux-libc-dev:i386
3. git clone https://github.com/coolsnowwolf/lede 命令下载好源代码，然后 cd lede 进入目录
4. ./scripts/feeds update -a
./scripts/feeds install -a
make menuconfig
5. 最后选好你要的路由，输入 make -j1 V=s （-j1 后面是线程数。第一次编译推荐用单线程，国内请尽量全局科学上网）即可开始编译你要的固件了。
本套代码保证肯定可以编译成功。里面包括了 R9 所有源代码，包括 IPK 的。
你可以自由使用，但源码编译二次发布请注明我的 GitHub 仓库链接。谢谢合作！
特别提示：
1.源代码中绝不含任何后门和可以监控或者劫持你的 HTTPS 的闭源软件，SSL 安全是互联网最后的壁垒。安全干净才是固件应该做到的；
2.如有技术问题需要讨论，欢迎加入 QQ 讨论群：OP共享技术交流群 ,号码 297253733 ，加群链接: 点击链接加入群聊【OP共享技术交流群】：https://jq.qq.com/?_wv=1027&k=5yCRuXL
3. 想学习OpenWrt开发，但是摸不着门道？自学没毅力？基础太差？怕太难学不会？跟着佐大学OpenWrt开发入门培训班助你能学有所成
报名地址：http://forgotfun.org/2018/04/openwrt-training-2018.html
去广告订阅地址默认内置来自以下源，如有去广告的误杀漏杀问题可以到这里报告：
https://github.com/privacy-protection-tools/anti-AD
Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.
Use "make menuconfig" to configure your image.
Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.
To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.
Note: Addition Lean's private package source code in ./package/lean directory. Use it under GPL v3.
GPLv3 is compatible with more licenses than GPLv2: it allows you to make combinations with code that has specific kinds of additional requirements that are not in GPLv3 itself. Section 7 has more information about this, including the list of additional requirements that are permitted.