We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
你好，我在运行你的代码（./topo.py ）时发现主机a 发出 ICMP ping 主机b时，由于R1配了 ip route add 10.0.2.0/24 encap seg6 mode encap segs fc00:3::bb,fc00:4::bb dev r1-eth1 这条命令，会将原有 ICMP 包封装到新的IPv6+SRH报文中，但是现在的报文顺序是IPV6/ICMPv6/IPv6+SRH/IPv4/ICMP（本应该是IPv6+SRH/IPv4/ICMP），请问下为啥这里会出现 ICMPv6 的封装头呢？我自己在 Mininet 上验证也出现了这个问题。
ip route add 10.0.2.0/24 encap seg6 mode encap segs fc00:3::bb,fc00:4::bb dev r1-eth1
The text was updated successfully, but these errors were encountered:
No branches or pull requests
你好，我在运行你的代码（./topo.py ）时发现主机a 发出 ICMP ping 主机b时，由于R1配了
ip route add 10.0.2.0/24 encap seg6 mode encap segs fc00:3::bb,fc00:4::bb dev r1-eth1这条命令，会将原有 ICMP 包封装到新的IPv6+SRH报文中，但是现在的报文顺序是IPV6/ICMPv6/IPv6+SRH/IPv4/ICMP（本应该是IPv6+SRH/IPv4/ICMP），请问下为啥这里会出现 ICMPv6 的封装头呢？我自己在 Mininet 上验证也出现了这个问题。The text was updated successfully, but these errors were encountered: