[SystemZ] Handle address clobbering in splitMove(). (#92105)

When expanding an L128 (which is used to reload i128) it is
possible that the quadword destination register clobbers an
address register. This patch adds an assertion against the case
where both of the expanded parts clobber the address, and in the
case where one of the expanded parts do so puts it last.

Fixes #91437

(cherry picked from commit d6ee7e8)

llvm/lib/Target/SystemZ/SystemZInstrInfo.cpp

@@ -70,49 +70,62 @@ void SystemZInstrInfo::splitMove(MachineBasicBlock::iterator MI,
   MachineBasicBlock *MBB = MI->getParent();
   MachineFunction &MF = *MBB->getParent();
 
-  // Get two load or store instructions.  Use the original instruction for one
-  // of them (arbitrarily the second here) and create a clone for the other.
-  MachineInstr *EarlierMI = MF.CloneMachineInstr(&*MI);
-  MBB->insert(MI, EarlierMI);
+  // Get two load or store instructions.  Use the original instruction for
+  // one of them and create a clone for the other.
+  MachineInstr *HighPartMI = MF.CloneMachineInstr(&*MI);
+  MachineInstr *LowPartMI = &*MI;
+  MBB->insert(LowPartMI, HighPartMI);
 
   // Set up the two 64-bit registers and remember super reg and its flags.
-  MachineOperand &HighRegOp = EarlierMI->getOperand(0);
-  MachineOperand &LowRegOp = MI->getOperand(0);
+  MachineOperand &HighRegOp = HighPartMI->getOperand(0);
+  MachineOperand &LowRegOp = LowPartMI->getOperand(0);
   Register Reg128 = LowRegOp.getReg();
   unsigned Reg128Killed = getKillRegState(LowRegOp.isKill());
   unsigned Reg128Undef  = getUndefRegState(LowRegOp.isUndef());
   HighRegOp.setReg(RI.getSubReg(HighRegOp.getReg(), SystemZ::subreg_h64));
   LowRegOp.setReg(RI.getSubReg(LowRegOp.getReg(), SystemZ::subreg_l64));
 
-  if (MI->mayStore()) {
-    // Add implicit uses of the super register in case one of the subregs is
-    // undefined. We could track liveness and skip storing an undefined
-    // subreg, but this is hopefully rare (discovered with llvm-stress).
-    // If Reg128 was killed, set kill flag on MI.
-    unsigned Reg128UndefImpl = (Reg128Undef | RegState::Implicit);
-    MachineInstrBuilder(MF, EarlierMI).addReg(Reg128, Reg128UndefImpl);
-    MachineInstrBuilder(MF, MI).addReg(Reg128, (Reg128UndefImpl | Reg128Killed));
-  }
-
   // The address in the first (high) instruction is already correct.
   // Adjust the offset in the second (low) instruction.
-  MachineOperand &HighOffsetOp = EarlierMI->getOperand(2);
-  MachineOperand &LowOffsetOp = MI->getOperand(2);
+  MachineOperand &HighOffsetOp = HighPartMI->getOperand(2);
+  MachineOperand &LowOffsetOp = LowPartMI->getOperand(2);
   LowOffsetOp.setImm(LowOffsetOp.getImm() + 8);
 
-  // Clear the kill flags on the registers in the first instruction.
-  if (EarlierMI->getOperand(0).isReg() && EarlierMI->getOperand(0).isUse())
-    EarlierMI->getOperand(0).setIsKill(false);
-  EarlierMI->getOperand(1).setIsKill(false);
-  EarlierMI->getOperand(3).setIsKill(false);
-
   // Set the opcodes.
   unsigned HighOpcode = getOpcodeForOffset(NewOpcode, HighOffsetOp.getImm());
   unsigned LowOpcode = getOpcodeForOffset(NewOpcode, LowOffsetOp.getImm());
   assert(HighOpcode && LowOpcode && "Both offsets should be in range");
+  HighPartMI->setDesc(get(HighOpcode));
+  LowPartMI->setDesc(get(LowOpcode));
+
+  MachineInstr *FirstMI = HighPartMI;
+  if (MI->mayStore()) {
+    FirstMI->getOperand(0).setIsKill(false);
+    // Add implicit uses of the super register in case one of the subregs is
+    // undefined. We could track liveness and skip storing an undefined
+    // subreg, but this is hopefully rare (discovered with llvm-stress).
+    // If Reg128 was killed, set kill flag on MI.
+    unsigned Reg128UndefImpl = (Reg128Undef | RegState::Implicit);
+    MachineInstrBuilder(MF, HighPartMI).addReg(Reg128, Reg128UndefImpl);
+    MachineInstrBuilder(MF, LowPartMI).addReg(Reg128, (Reg128UndefImpl | Reg128Killed));
+  } else {
+    // If HighPartMI clobbers any of the address registers, it needs to come
+    // after LowPartMI.
+    auto overlapsAddressReg = [&](Register Reg) -> bool {
+      return RI.regsOverlap(Reg, MI->getOperand(1).getReg()) ||
+             RI.regsOverlap(Reg, MI->getOperand(3).getReg());
+    };
+    if (overlapsAddressReg(HighRegOp.getReg())) {
+      assert(!overlapsAddressReg(LowRegOp.getReg()) &&
+             "Both loads clobber address!");
+      MBB->splice(HighPartMI, MBB, LowPartMI);
+      FirstMI = LowPartMI;
+    }
+  }
 
-  EarlierMI->setDesc(get(HighOpcode));
-  MI->setDesc(get(LowOpcode));
+  // Clear the kill flags on the address registers in the first instruction.
+  FirstMI->getOperand(1).setIsKill(false);
+  FirstMI->getOperand(3).setIsKill(false);
 }
 
 // Split ADJDYNALLOC instruction MI.

llvm/test/CodeGen/SystemZ/splitMove_addressReg.mir

@@ -0,0 +1,26 @@
+# RUN: llc -mtriple=s390x-linux-gnu -run-pass=postrapseudos \
+# RUN:   %s -o - -verify-machineinstrs | FileCheck %s
+#
+# Test that a L128 reload do not overwrite an address register prematurely
+# after being split into two LGs.
+
+--- |
+  target triple = "s390x-unknown-unknown"
+
+  define void @fun() {
+    ret void
+  }
+
+...
+
+# CHECK: name: fun
+
+---
+name:            'fun'
+body:             |
+  bb.0:
+    liveins: $r4d, $r15d
+    $r4q = L128 $r15d, 14920, killed $r4d
+    Return
+
+...