Skip to content

Latest commit

 

History

History
169 lines (116 loc) · 4.83 KB

locking.md

File metadata and controls

169 lines (116 loc) · 4.83 KB
Raw

#<cldoc:Server-side locking>

Server-side locking support.

Motivation

Locking is one of the things people often want to have with memcached.

Though add has been used to implement locks at client-side 1 2, this approach is fragile if clients are not very stable; if a client acquires a lock then dies, the lock will never be released. Moreover, objects used to implement locks may be evicted.

yrmcds introduces a server-side locking mechanism to resolve this problem.

Overview

A lock associates an existing object and a client connection. Locked objects will neither be expired nor be evicted. Modification commands such as set, replace, or delete will fail if the object is locked, unless the client is holding the lock. get succeeds even though the object is locked by another client. If a client is disconnected, all locks held by the client will be released.

Although lock commands are available in both ASCII and binary protocols, use of binary protocol is strongly recommended.

ASCII protocol

  • lock KEY\r\n

    acquires a server-side lock of the object associated with KEY. The response will be one of:

    • "OK\r\n", to indicate success.
    • "LOCKED\r\n", if another client has already locked the object.
    • "NOT_FOUND\r\n", if the object does not exist.

  • unlock KEY\r\n

    releases a server-side lock. The response will be one of:

    • "OK\r\n", to indicate success.
    • "CLIENT_ERROR MESSAGE\r\n", if the object is not locked by the client, or if the object does not exist.

  • unlock_all\r\n

    releases all locks held by the client. The response will be "OK\r\n".

Additionally, modification commands such as set and delete will fail when the object is locked by another client. The response will be

"LOCKED\r\n"

in this case.

Binary protocol

The binary protocol is enhanced with new Lock, Unlock, UnlockAll, LaG (lock and get), LaGK (lock and get with key), and RaU (replace and unlock) commands.

New opcodes are:

- 0x40 (Lock)
- 0x41 (LockQ)
- 0x42 (Unlock)
- 0x43 (UnlockQ)
- 0x44 (UnlockAll)
- 0x45 (UnlockAllQ)
- 0x46 (LaG)
- 0x47 (LaGQ)
- 0x48 (LaGK)
- 0x49 (LaGKQ)
- 0x4a (RaU)
- 0x4b (RaUQ)

New response statuses are:

- 0x0010 Locked
- 0x0011 Not locked

Lock, Lock Quietly

Request:

- MUST NOT have extras.
- MUST have key.
- MUST NOT have value.

Lock an object. The response-packet contains no extra data, and the result of the operation is signaled through the status code. Specifically, 0x0001 (not found) is returned when the object does not exist, and 0x0010 (locked) is returned when the object has been locked by another client.

Unlock, Unlock Quietly

Request:

- MUST NOT have extras.
- MUST have key.
- MUST NOT have value.

Unlock a locked object. The response-packet contains no extra data, and the result of the operation is signaled through the status code. Specifically, 0x0001 (not found) is returned when the object does not exist, and 0x0011 (not locked) is returned when the object is not locked by the client.

Unlock All, Unlock All Quietly

Request:

- MUST NOT have extras.
- MUST NOT have key.
- MUST NOT have value.

Unlock all locked objects held by the client. The response-packet contains no extra data, and the result of the operation is signaled through the status code. In fact, this command will succeed unconditionally.

Lock and Get, Lock and Get Quietly, Lock and Get Key, Lock and Get Key Quietly

Request:

- MAY have extras.
- MUST have key.
- MUST NOT have value.

Response (if found):

- MUST have extras.
- MAY have key.
- MAY have value.

Lock an object and get the data atomically.

Optional extra data for Lock and Get request is 4 byte expiration time. If extra data exists, the object's expiration time will be renewed.

The response is the same as that of Get or GetK command. Specifically, if the object is locked, the response with status code = 0x0010 (locked) will be returned. LaGQ and LaGKQ will return the response with status code = 0x0001 (not found) if the object is not found.

Replace and Unlock, Replace and Unlock Quietly

Request:

- MUST have extras.
- MUST have key.
- MUST have value.

Replace a locked object then unlock it atomically. The client need to lock the object in advance.

The extra data are the same as that of Replace binary command, i.e., 4 byte flags and 4 byte expiration time.

The response is almost the same as that of Replace binary command. Specifically, 0x0011 (not locked) is returned when the object is not locked by the client.