You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am a bit hesitant to submit this is a bug, because it might be personal incompetence - but I cannot get the CSR Tools (BlueSuite 2.6.6, tried older 2.5 before) to work.
CMD Output is:
22:20:15.530489: all:spi.c:567:spi_init: csr-spi-ftdi 0.5.3-a5, git rev 1f342f2, libftdi 1.4-unknown
22:20:15.920445: err:spi.c:709:spi_open: No FTDI device found
ERROR: Couldn't find SPI port
Failed
-> since it says "csr-spi-ftdi 0.5.3" the library seems to be correctly installed
I am using an FTDI232, zadig replaced the driver without any problem - It is listed in device manager as "FT232R USB UART" under "libusbK USB Devices" - so to my understanding it should at least be discovered?
Thanks for helping!
The text was updated successfully, but these errors were encountered:
Took a look at the sourcecode meanwhile - 0x0403, 0x6001 is the first vendor id listed in ftdi_device_ids - Windows Device Manager reports exactly this IDs for my device -> It should be supported
I am a bit hesitant to submit this is a bug, because it might be personal incompetence - but I cannot get the CSR Tools (BlueSuite 2.6.6, tried older 2.5 before) to work.
CMD Output is:
22:20:15.530489: all:spi.c:567:spi_init: csr-spi-ftdi 0.5.3-a5, git rev 1f342f2, libftdi 1.4-unknown
22:20:15.920445: err:spi.c:709:spi_open: No FTDI device found
ERROR: Couldn't find SPI port
Failed
-> since it says "csr-spi-ftdi 0.5.3" the library seems to be correctly installed
I am using an FTDI232, zadig replaced the driver without any problem - It is listed in device manager as "FT232R USB UART" under "libusbK USB Devices" - so to my understanding it should at least be discovered?
Thanks for helping!
The text was updated successfully, but these errors were encountered: