New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Pause SD print moves carriage out of reach #15
Comments
I think if it is also for nozzle cleaning when pause going to home will work only for 1.0 |
What do you think to put position also in EEPROM like for Manual Leveling and Auto leveling ? |
Luc, to be honest, Id be thrilled to just get the pause SD print position away from where it is for the 1.0. I fear Im going to develop a deformity with the way I have to twist my hands in there to change or correct filament. ;) By having in firmware, do you mean having a choice of positions a user could pick for pausing prints? If so, I think that would be great! If you meant a choice of locations in the menu once the print is paused, thats even better! |
I was thinking more just about the X and Y position to be modifiable |
Man.... Are you serious? I hated pausing in repetier because it would just rest on the print and I couldnt do much to resolve issues. I had no idea you could manually move it a better position and it would pick up from a pause. When I ran across this feature while printing off SD I was so excited! Now that I think about it, when first starting I paused and disabled stepper which was a catastrophe. From then on I thought pause and move was not feasible. Ive since learned to quit messing with the stepper altogether. ;) Well, this request has provided great assistance, opportunity, and embarrassment at the same time....as auto move to different positions is just lazy if I can do it via position menu and resume. Once again Luc, I very much appreciate it. |
haha you are welcome Actually every function is available during pause and that is why I set https://github.com/luc-github/Repetier-Firmware/issues/46 you can see my proposal here:https://github.com/luc-github/Repetier-Firmware-0.92/blob/master/Menu%20Plans.xlsx
|
When pausing a SD print, the carriage moves to the front right which is very difficult to get at. For pause print could the carriage be moved to either x/y home or the clean nozzle position? This would allow for both nozzle cleaning and filament change mid print. Thanks.
The text was updated successfully, but these errors were encountered: