New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
qt.qpa.xcb: QXcbConnection: XCB error: #834
Comments
@maheshs11 could you try with working USB3 cable? In case of RPi, it got only USB2 connection link. For windows, device was already in use (reconnecting might help). |
@Erol444 on windows tried reconnecting does not work, (depth_ai) C:\Users\Admin\depthai>python depthai_demo.py -usbs usb2 |
Rpi also has 2 blue usb 3.0 ports right?, will try after getting new cables. |
Yes please try with different cables, you are still getting only USB2;
|
@Erol444 tried changing cables still same issue,
} |
|
In windows temporary solution to use v2.21.2.0 is to force re-install depthai package and restart and remove usb cable, only monocamera works, for rgb same issue as #749 |
@Erol444 , bought short usb3.0 , device not found error. Not showing in device manager y? |
Please see https://docs.luxonis.com/en/latest/pages/troubleshooting/ and provide all terminal outputs for steps provided in there. |
pi@raspberrypi:~/depthai $ lsusb pi@raspberrypi:~/depthai $ lsusb | grep 03e7 pi@raspberrypi:~/depthai $ dmesg -w| grep usb |
command : dmseg -w for orange color 3.0 cable logs: for blue colour usb 3.0 : no logs |
Did you setup the udev rules? The device does get detected by linux ( |
Yes, I did setup udev rules, it get detected with only usb2 cable and orange cable 3.0 and the error comes low speed and above error, for blue color usb 3.0 cable it does not get detected. |
OAK will always get detected as usb2 by default, after you init the device it will (if it can) switch to usb3. |
Low speed error comes and closes, if required for debugging error will give acess to my vnc server. |
@maheshs11 sorry about the delay. Have you tried using our preconfigured RPi image? |
No, will try it. |
pi@raspberrypi:~/depthai $ python3 depthai_demo.py
Using depthai module from: /home/pi/.local/lib/python3.9/site-packages/depthai.cpython-39-aarch64-linux-gnu.so
Depthai version installed: 2.21.2.0
Setting up demo...
Available devices:
[0] 1844301051DD660E00 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
qt.qpa.xcb: QXcbConnection: XCB error: 148 (Unknown), sequence: 186, resource id: 0, major code: 140 (Unknown), minor code: 20
[1844301051DD660E00] [1.1.1] [3.397] [system] [critical] Fatal error. Please report to developers. Log: 'Fatal error on MSS CPU: trap: 00, address: 00000000' '0'
[CRITICAL] [0:00:03.397196] Fatal error. Please report to developers. Log: 'Fatal error on MSS CPU: trap: 00, address: 00000000' '0'
Stopping demo...
=== TOTAL FPS ===
Traceback (most recent call last):
File "/home/pi/depthai/depthai_demo.py", line 1053, in
runOpenCv()
File "/home/pi/depthai/depthai_demo.py", line 1043, in runOpenCv
demo.run_all(confManager)
File "/home/pi/depthai/depthai_demo.py", line 133, in run_all
self.run()
File "/home/pi/depthai/depthai_demo.py", line 317, in run
self.loop()
File "/home/pi/depthai/depthai_demo.py", line 370, in loop
raise self.error
RuntimeError: Fatal error. Please report to developers. Log: 'Fatal error on MSS CPU: trap: 00, address: 00000000' '0'
Sentry is attempting to send 2 pending error messages
Waiting up to 2 seconds
Press Ctrl-C to quit
The text was updated successfully, but these errors were encountered: