We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
macOS Mojave 10.14.3
Install xhyve by source:
git clone https://github.com/machyve/xhyve.git cd xhyve make
I don't known why I can run xhyve in build/Release/ directory (as README.md use xcodebuild), but I found I can use make to get right xhyve
xhyve
build/Release/
xcodebuild
make
Have try install Ubuntu 18 by ubuntu-18.04.1.0-live-server-amd64.iso, FAILED. Becuase when installation, it always can not read from CDROM.
ubuntu-18.04.1.0-live-server-amd64.iso
I have test Ubuntu 18 can install through netinstall. The Installation is very smoothly, and Install finish successed.
Use following run.sh to start ubuntu 18 vm:
#!/bin/bash KERNEL="boot/vmlinuz-4.18.0-13-generic" INITRD="boot/initrd.img-4.18.0-13-generic" CMDLINE="earlyprintk=serial console=ttyS0 acpi=off root=/dev/vda1 ro" UUID="-U 8e7af180-c54d-4aa2-9bef-59d94a1ac572" # A UUID will ensure we get a consistent ip address assigned # Guest Config CPU="-c 2" MEM="-m 2G" PCI_DEV="-s 0:0,hostbridge -s 31,lpc" NET="-s 2:0,virtio-net,en0" IMG_HDD="-s 4:0,virtio-blk,ubuntu18.img" LPC_DEV="-l com1,stdio" ACPI="-A" # and now run sudo /Users/huatai/github/xhyve/build/xhyve $UUID $ACPI $CPU $MEM $PCI_DEV $LPC_DEV $NET $IMG_HDD -f kexec,$KERNEL,$INITRD,"$CMDLINE"
It will hang after virtio_blk load, so can't read from vda, and system hang.
Loading, please wait... starting version 239 [ 1.279051] virtio_blk virtio1: [vda] 33554432 512-byte logical blocks (17.2 GB/16.0 GiB) [ 1.283750] do_IRQ: 1.36 No irq handler for vector [ 1.311586] virtio_net virtio0 enp0s2: renamed from eth0 Unhandled ps2 mouse command 0xe1 Unhandled ps2 mouse command 0x0a Unhandled ps2 mouse command 0x01 Unhandled ps2 mouse command 0x41 Unhandled ps2 mouse command 0x88 [ 2.540776] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 121.872352] raid6: sse2x1 gen() 9198 MB/s [ 121.920074] raid6: sse2x1 xor() 7801 MB/s [ 121.968921] raid6: sse2x2 gen() 15423 MB/s [ 122.016271] raid6: sse2x2 xor() 10490 MB/s [ 122.064677] raid6: sse2x4 gen() 18932 MB/s [ 122.112209] raid6: sse2x4 xor() 11337 MB/s [ 122.160278] raid6: avx2x1 gen() 26416 MB/s [ 122.208192] raid6: avx2x1 xor() 18559 MB/s [ 122.256978] raid6: avx2x2 gen() 32151 MB/s [ 122.304832] raid6: avx2x2 xor() 20180 MB/s [ 122.352862] raid6: avx2x4 gen() 36636 MB/s [ 122.400897] raid6: avx2x4 xor() 21725 MB/s [ 122.401551] raid6: using algorithm avx2x4 gen() 36636 MB/s [ 122.402360] raid6: .... xor() 21725 MB/s, rmw enabled [ 122.403106] raid6: using avx2x2 recovery algorithm [ 122.406308] xor: automatically using best checksumming function avx [ 122.419109] Btrfs loaded, crc32c=crc32c-intel Scanning for Btrfs filesystems [ 242.660441] INFO: task systemd-udevd:157 blocked for more than 120 seconds. [ 242.662965] Not tainted 4.18.0-13-generic #14-Ubuntu [ 242.664747] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 242.666721] systemd-udevd D 0 157 142 0x80000004 [ 242.667982] Call Trace: [ 242.668573] __schedule+0x29e/0x840 [ 242.669306] schedule+0x2c/0x80 [ 242.669965] io_schedule+0x16/0x40 [ 242.670681] do_read_cache_page+0x3c5/0x5b0 [ 242.671552] ? blkdev_writepages+0x10/0x10 [ 242.672384] ? page_cache_tree_insert+0xe0/0xe0 [ 242.673282] read_cache_page+0x15/0x20 [ 242.674018] read_dev_sector+0x2d/0xd0 [ 242.674750] read_lba+0xcd/0x220 [ 242.675382] ? find_valid_gpt+0xd1/0x560 [ 242.676178] find_valid_gpt+0xf1/0x560 [ 242.676908] efi_partition+0x89/0x3a3 [ 242.677634] ? snprintf+0x49/0x60 [ 242.678282] ? find_valid_gpt+0x560/0x560 [ 242.679063] check_partition+0x139/0x236 [ 242.679924] rescan_partitions+0xaf/0x290 [ 242.680813] ? down_write+0x12/0x40 [ 242.681604] __blkdev_get+0x367/0x500 [ 242.682438] blkdev_get+0x10c/0x330 [ 242.683230] ? unlock_new_inode+0x4d/0x60 [ 242.684154] ? bdget+0x110/0x130 [ 242.684918] __device_add_disk+0x392/0x430 [ 242.685699] device_add_disk+0x13/0x20 [ 242.686508] virtblk_probe+0x4ca/0x6d2 [virtio_blk] [ 242.687447] virtio_dev_probe+0x172/0x230 [ 242.688227] driver_probe_device+0x2e3/0x460 [ 242.689470] __driver_attach+0xe4/0x110 [ 242.690441] ? driver_probe_device+0x460/0x460 [ 242.691411] bus_for_each_dev+0x74/0xb0 [ 242.692198] ? kmem_cache_alloc_trace+0x1c4/0x1d0 [ 242.693128] driver_attach+0x1e/0x20 [ 242.693812] bus_add_driver+0x159/0x230 [ 242.694545] ? 0xffffffffc009d000 [ 242.695197] driver_register+0x70/0xc0 [ 242.695920] ? 0xffffffffc009d000 [ 242.696606] register_virtio_driver+0x20/0x30 [ 242.697448] init+0x56/0x1000 [virtio_blk] [ 242.698233] do_one_initcall+0x4a/0x1c4 [ 242.698976] ? free_pcp_prepare+0x4f/0xd0 [ 242.699741] ? _cond_resched+0x1all_64+0x5a/0x110 [ 242.707146] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 242.708088] RIP: 0033:0x7f6dae3b1219 [ 242.708823] Code: Bad RIP value. [ 242.709474] RSP: 002b:00007ffd3fa55c08 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 242.710918] RAX: ffffffffffffffda RBX: 00005600d06447a0 RCX: 00007f6dae3b1219 [ 242.712361] RDX: 0000000000000000 RSI: 00007f6dae295cad RDI: 0000000000000005 [ 242.713844] RBP: 00007f6dae295cad R08: 0000000000000000 R09: 00005600d062ea70 [ 242.715257] R10: 0000000000000005 R11: 0000000000000246 R12: 0000000000000000 [ 242.716621] R13: 00005600d0642240 R14: 0000000000020000 R15: 00005600d06447a0
The text was updated successfully, but these errors were encountered:
I was able to reproduce this using your commandline. It worked for me after removing "acpi=off" from CMDLINE.
Can you see if this solves it for you as well?
Sorry, something went wrong.
Thank you. @John-K
Boot ubuntu 18.04.1 success by removing "acpi=off" from CMDLINE, it works well.
@John-K , @huataihuang could you give more details on what images you've done to get it working?
No branches or pull requests
macOS Mojave 10.14.3
Install xhyve by source:
Have try install Ubuntu 18 by
ubuntu-18.04.1.0-live-server-amd64.iso
, FAILED. Becuase when installation, it always can not read from CDROM.I have test Ubuntu 18 can install through netinstall. The Installation is very smoothly, and Install finish successed.
Use following run.sh to start ubuntu 18 vm:
It will hang after virtio_blk load, so can't read from vda, and system hang.
The text was updated successfully, but these errors were encountered: