L1StandardBridge.sol

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;

import { Predeploys } from "../libraries/Predeploys.sol";
import { StandardBridge } from "../universal/StandardBridge.sol";
import { Semver } from "../universal/Semver.sol";
import { SafeCall } from "../libraries/SafeCall.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { OptimismMintableERC20 } from "../universal/OptimismMintableERC20.sol";
import { L2StandardBridge } from "../L2/L2StandardBridge.sol";

/**
 * @custom:proxied
 * @title L1StandardBridge
 * @notice The L1StandardBridge is responsible for transfering ETH and ERC20 tokens between L1 and
 *         L2. In the case that an ERC20 token is native to L1, it will be escrowed within this
 *         contract. If the ERC20 token is native to L2, it will be burnt. Before Bedrock, ETH was
 *         stored within this contract. After Bedrock, ETH is instead stored inside the
 *         OptimismPortal contract.
 *         NOTE: this contract is not intended to support all variations of ERC20 tokens. Examples
 *         of some token types that may not be properly supported by this contract include, but are
 *         not limited to: tokens with transfer fees, rebasing tokens, and tokens with blocklists.
 */
contract L1StandardBridge is StandardBridge, Semver {
    using SafeERC20 for IERC20;

    address public immutable L1_MNT_ADDRESS;

    /**
     * @custom:legacy
     * @notice Emitted whenever a deposit of MNT from L1 into L2 is initiated.
     *
     * @param from      Address of the depositor.
     * @param to        Address of the recipient on L2.
     * @param amount    Amount of MNT deposited.
     * @param extraData Extra data attached to the deposit.
     */
    event MNTDepositInitiated(
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes extraData
    );

    /**
     * @custom:legacy
     * @notice Emitted whenever a withdrawal of MNT from L2 to L1 is finalized.
     *
     * @param from      Address of the withdrawer.
     * @param to        Address of the recipient on L1.
     * @param amount    Amount of MNT withdrawn.
     * @param extraData Extra data attached to the withdrawal.
     */
    event MNTWithdrawalFinalized(
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes extraData
    );

    /**
     * @custom:legacy
     * @notice Emitted whenever a deposit of ETH from L1 into L2 is initiated.
     *
     * @param from      Address of the depositor.
     * @param to        Address of the recipient on L2.
     * @param amount    Amount of ETH deposited.
     * @param extraData Extra data attached to the deposit.
     */
    event ETHDepositInitiated(
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes extraData
    );

    /**
     * @custom:legacy
     * @notice Emitted whenever a withdrawal of ETH from L2 to L1 is finalized.
     *
     * @param from      Address of the withdrawer.
     * @param to        Address of the recipient on L1.
     * @param amount    Amount of ETH withdrawn.
     * @param extraData Extra data attached to the withdrawal.
     */
    event ETHWithdrawalFinalized(
        address indexed from,
        address indexed to,
        uint256 amount,
        bytes extraData
    );

    /**
     * @custom:legacy
     * @notice Emitted whenever an ERC20 deposit is initiated.
     *
     * @param l1Token   Address of the token on L1.
     * @param l2Token   Address of the corresponding token on L2.
     * @param from      Address of the depositor.
     * @param to        Address of the recipient on L2.
     * @param amount    Amount of the ERC20 deposited.
     * @param extraData Extra data attached to the deposit.
     */
    event ERC20DepositInitiated(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /**
     * @custom:legacy
     * @notice Emitted whenever an ERC20 withdrawal is finalized.
     *
     * @param l1Token   Address of the token on L1.
     * @param l2Token   Address of the corresponding token on L2.
     * @param from      Address of the withdrawer.
     * @param to        Address of the recipient on L1.
     * @param amount    Amount of the ERC20 withdrawn.
     * @param extraData Extra data attached to the withdrawal.
     */
    event ERC20WithdrawalFinalized(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );

    /**
     * @custom:semver 1.1.0
     *
     * @param _messenger Address of the L1CrossDomainMessenger.
     */
    constructor(address payable _messenger, address _l1mnt)
        Semver(1, 1, 0)
        StandardBridge(_messenger, payable(Predeploys.L2_STANDARD_BRIDGE))
    {
        L1_MNT_ADDRESS = _l1mnt;
    }

    /**
     * @notice Allows EOAs to bridge ETH by sending directly to the bridge.
     */
    receive() external payable override onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, RECEIVE_DEFAULT_GAS_LIMIT, bytes(""));
    }

    /**
     * @custom:legacy
     * @notice Deposits some amount of ETH into the sender's account on L2.
     *
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2. Data supplied here will not be used to
     *                     execute any code on L2 and is only emitted as extra data for the
     *                     convenience of off-chain tooling.
     */
    function depositETH(uint32 _minGasLimit, bytes calldata _extraData) external payable onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, _minGasLimit, _extraData);
    }

    /**
     * @custom:legacy
     * @notice Deposits some amount of ETH into a target account on L2.
     *         Note that if ETH is sent to a contract on L2 and the call fails, then that ETH will
     *         be locked in the L2StandardBridge. ETH may be recoverable if the call can be
     *         successfully replayed by increasing the amount of gas supplied to the call. If the
     *         call will fail for any amount of gas, then the ETH will be locked permanently.
     *
     * @param _to          Address of the recipient on L2.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2. Data supplied here will not be used to
     *                     execute any code on L2 and is only emitted as extra data for the
     *                     convenience of off-chain tooling.
     */
    function depositETHTo(
        address _to,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) external payable {
        _initiateETHDeposit(msg.sender, _to, _minGasLimit, _extraData);
    }

    /**
    * @custom:legacy
     * @notice Deposits some amount of MNT into the sender's account on L2.
     *
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2. Data supplied here will not be used to
     *                     execute any code on L2 and is only emitted as extra data for the
     *                     convenience of off-chain tooling.
     */
    function depositMNT(
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) external onlyEOA {
        _initiateMNTDeposit(msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }

    /**
     * @custom:legacy
     * @notice Deposits some amount of MNT into a target account on L2.
     *         Note that if MNT is sent to a contract on L2 and the call fails, then that ETH will
     *         be locked in the L2StandardBridge. ETH may be recoverable if the call can be
     *         successfully replayed by increasing the amount of gas supplied to the call. If the
     *         call will fail for any amount of gas, then the ETH will be locked permanently.
     *
     * @param _to          Address of the recipient on L2.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2. Data supplied here will not be used to
     *                     execute any code on L2 and is only emitted as extra data for the
     *                     convenience of off-chain tooling.
     */
    function depositMNTTo(
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) external payable {
        _initiateMNTDeposit(msg.sender, _to, _amount, _minGasLimit, _extraData);
    }

    /**
     * @custom:legacy
     * @notice Deposits some amount of ERC20 tokens into the sender's account on L2.
     *
     * @param _l1Token     Address of the L1 token being deposited.
     * @param _l2Token     Address of the corresponding token on L2.
     * @param _amount      Amount of the ERC20 to deposit.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2. Data supplied here will not be used to
     *                     execute any code on L2 and is only emitted as extra data for the
     *                     convenience of off-chain tooling.
     */
    function depositERC20(
        address _l1Token,
        address _l2Token,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) external virtual onlyEOA {
        _initiateERC20Deposit(
            _l1Token,
            _l2Token,
            msg.sender,
            msg.sender,
            _amount,
            _minGasLimit,
            _extraData
        );
    }

    /**
     * @custom:legacy
     * @notice Deposits some amount of ERC20 tokens into a target account on L2.
     *
     * @param _l1Token     Address of the L1 token being deposited.
     * @param _l2Token     Address of the corresponding token on L2.
     * @param _to          Address of the recipient on L2.
     * @param _amount      Amount of the ERC20 to deposit.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2. Data supplied here will not be used to
     *                     execute any code on L2 and is only emitted as extra data for the
     *                     convenience of off-chain tooling.
     */
    function depositERC20To(
        address _l1Token,
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) external virtual {
        _initiateERC20Deposit(
            _l1Token,
            _l2Token,
            msg.sender,
            _to,
            _amount,
            _minGasLimit,
            _extraData
        );
    }

    /**
 * @custom:legacy
     * @notice Finalizes a withdrawal of MNT from L2.
     *
     * @param _from      Address of the withdrawer on L2.
     * @param _to        Address of the recipient on L1.
     * @param _amount    Amount of MNT to withdraw.
     * @param _extraData Optional data forwarded from L2.
     */
    function finalizeMantleWithdrawal(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    ) external payable {
        finalizeBridgeMNT(_from, _to, _amount, _extraData);
    }

    /**
     * @custom:legacy
     * @notice Finalizes a withdrawal of ETH from L2.
     *
     * @param _from      Address of the withdrawer on L2.
     * @param _to        Address of the recipient on L1.
     * @param _amount    Amount of ETH to withdraw.
     * @param _extraData Optional data forwarded from L2.
     */
    function finalizeETHWithdrawal(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    ) external payable {
        finalizeBridgeETH(_from, _to, _amount, _extraData);
    }

    /**
     * @custom:legacy
     * @notice Finalizes a withdrawal of ERC20 tokens from L2.
     *
     * @param _l1Token   Address of the token on L1.
     * @param _l2Token   Address of the corresponding token on L2.
     * @param _from      Address of the withdrawer on L2.
     * @param _to        Address of the recipient on L1.
     * @param _amount    Amount of the ERC20 to withdraw.
     * @param _extraData Optional data forwarded from L2.
     */
    function finalizeERC20Withdrawal(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    ) external {
        finalizeBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _extraData);
    }

    /**
     * @custom:legacy
     * @notice Retrieves the access of the corresponding L2 bridge contract.
     *
     * @return Address of the corresponding L2 bridge contract.
     */
    function l2TokenBridge() external view returns (address) {
        return address(OTHER_BRIDGE);
    }

    /**
     * @notice Internal function for initiating an ETH deposit.
     *
     * @param _from        Address of the sender on L1.
     * @param _to          Address of the recipient on L2.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2.
     */
    function _initiateETHDeposit(
        address _from,
        address _to,
        uint32 _minGasLimit,
        bytes memory _extraData
    ) internal {
        _initiateBridgeETH(_from, _to, msg.value, _minGasLimit, _extraData);
    }

    /**
     * @notice Internal function for initiating an ERC20 deposit.
     *
     * @param _l1Token     Address of the L1 token being deposited.
     * @param _l2Token     Address of the corresponding token on L2.
     * @param _from        Address of the sender on L1.
     * @param _to          Address of the recipient on L2.
     * @param _amount      Amount of the ERC20 to deposit.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2.
     */
    function _initiateERC20Deposit(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    ) internal {
        _initiateBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _minGasLimit, _extraData);
    }

    /**
 * @notice Internal function for initiating an MNT deposit.
     *
     * @param _from        Address of the sender on L1.
     * @param _to          Address of the recipient on L2.
     * @param _amount      Amount of the ERC20 to deposit.
     * @param _minGasLimit Minimum gas limit for the deposit message on L2.
     * @param _extraData   Optional data to forward to L2.
     */
    function _initiateMNTDeposit(
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    ) internal {
        _initiateBridgeMNT(_from, _to, _amount, _minGasLimit, _extraData);
    }

    /**
     * @notice Emits the legacy ETHDepositInitiated event followed by the ETHBridgeInitiated event.
     *         This is necessary for backwards compatibility with the legacy bridge.
     *
     * @inheritdoc StandardBridge
     */
    function _emitETHBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    ) internal override {
        emit ETHDepositInitiated(_from, _to, _amount, _extraData);
        super._emitETHBridgeInitiated(_from, _to, _amount, _extraData);
    }

    /**
     * @notice Emits the legacy ETHWithdrawalFinalized event followed by the ETHBridgeFinalized
     *         event. This is necessary for backwards compatibility with the legacy bridge.
     *
     * @inheritdoc StandardBridge
     */
    function _emitETHBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    ) internal override {
        emit ETHWithdrawalFinalized(_from, _to, _amount, _extraData);
        super._emitETHBridgeFinalized(_from, _to, _amount, _extraData);
    }

    /**
     * @notice Emits the legacy ETHDepositInitiated event followed by the ETHBridgeInitiated event.
     *         This is necessary for backwards compatibility with the legacy bridge.
     *
     * @inheritdoc StandardBridge
     */
    function _emitMNTBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    ) internal override {
        emit MNTDepositInitiated(_from, _to, _amount, _extraData);
        super._emitMNTBridgeInitiated(_from, _to, _amount, _extraData);
    }

    /**
     * @notice Emits the legacy MNTWithdrawalFinalized event followed by the MNTBridgeFinalized
     *         event. This is necessary for backwards compatibility with the legacy bridge.
     *
     * @inheritdoc StandardBridge
     */
    function _emitMNTBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    ) internal override {
        emit MNTWithdrawalFinalized(_from, _to, _amount, _extraData);
        super._emitMNTBridgeFinalized(_from, _to, _amount, _extraData);
    }

    /**
     * @notice Emits the legacy ERC20DepositInitiated event followed by the ERC20BridgeInitiated
     *         event. This is necessary for backwards compatibility with the legacy bridge.
     *
     * @inheritdoc StandardBridge
     */
    function _emitERC20BridgeInitiated(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    ) internal override {
        emit ERC20DepositInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /**
     * @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
     *         event. This is necessary for backwards compatibility with the legacy bridge.
     *
     * @inheritdoc StandardBridge
     */
    function _emitERC20BridgeFinalized(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    ) internal override {
        emit ERC20WithdrawalFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /**
     * @notice Sends ETH to the sender's address on the other chain.
     *
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function bridgeETH(uint32 _minGasLimit, bytes calldata _extraData) public payable onlyEOA {
        _initiateBridgeETH(msg.sender, msg.sender, msg.value, _minGasLimit, _extraData);
    }

    /**
     * @notice Sends ETH to a receiver's address on the other chain. Note that if ETH is sent to a
     *         smart contract and the call fails, the ETH will be temporarily locked in the
     *         StandardBridge on the other chain until the call is replayed. If the call cannot be
     *         replayed with any amount of gas (call always reverts), then the ETH will be
     *         permanently locked in the StandardBridge on the other chain. ETH will also
     *         be locked if the receiver is the other bridge, because finalizeBridgeETH will revert
     *         in that case.
     *
     * @param _to          Address of the receiver.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function bridgeETHTo(
        address _to,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) public payable {
        _initiateBridgeETH(msg.sender, _to, msg.value, _minGasLimit, _extraData);
    }

    /**
     * @notice Sends MNT to the sender's address on the other chain.
     *
     * @param _amount      Amount of the MNT.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function bridgeMNT(uint256 _amount, uint32 _minGasLimit, bytes calldata _extraData) public payable onlyEOA {
        _initiateBridgeMNT(msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }

    /**
     * @notice Sends MNT to the sender's address on the other chain.
     *
     * @param _to          Address of the receiver.
     * @param _amount      Amount of the MNT.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function bridgeMNTTo(
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) public payable {
        _initiateBridgeMNT(msg.sender, _to, _amount, _minGasLimit, _extraData);
    }

    /**
     * @notice Sends ERC20 tokens to the sender's address on the other chain. Note that if the
     *         ERC20 token on the other chain does not recognize the local token as the correct
     *         pair token, the ERC20 bridge will fail and the tokens will be returned to sender on
     *         this chain.
     *
     * @param _localToken  Address of the ERC20 on this chain.
     * @param _remoteToken Address of the corresponding token on the remote chain.
     * @param _amount      Amount of local tokens to deposit.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function bridgeERC20(
        address _localToken,
        address _remoteToken,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) public onlyEOA override {
        _initiateBridgeERC20(
            _localToken,
            _remoteToken,
            msg.sender,
            msg.sender,
            _amount,
            _minGasLimit,
            _extraData
        );
    }

    /**
     * @notice Sends ERC20 tokens to a receiver's address on the other chain. Note that if the
     *         ERC20 token on the other chain does not recognize the local token as the correct
     *         pair token, the ERC20 bridge will fail and the tokens will be returned to sender on
     *         this chain.
     *
     * @param _localToken  Address of the ERC20 on this chain.
     * @param _remoteToken Address of the corresponding token on the remote chain.
     * @param _to          Address of the receiver.
     * @param _amount      Amount of local tokens to deposit.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function bridgeERC20To(
        address _localToken,
        address _remoteToken,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    ) public override {
        _initiateBridgeERC20(
            _localToken,
            _remoteToken,
            msg.sender,
            _to,
            _amount,
            _minGasLimit,
            _extraData
        );
    }

    /**
     * @notice Finalizes an ETH bridge on this chain. Can only be triggered by the other
     *         StandardBridge contract on the remote chain.
     *
     * @param _from      Address of the sender.
     * @param _to        Address of the receiver.
     * @param _amount    Amount of ETH being bridged.
     * @param _extraData Extra data to be sent with the transaction. Note that the recipient will
     *                   not be triggered with this data, but it will be emitted and can be used
     *                   to identify the transaction.
     */
    function finalizeBridgeETH(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    ) public payable override onlyOtherBridge {
        require(msg.value == _amount, "StandardBridge: amount sent does not match amount required");
        require(_to != address(this), "StandardBridge: cannot send to self");
        require(_to != address(MESSENGER), "StandardBridge: cannot send to messenger");

        // Emit the correct events. By default this will be _amount, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitETHBridgeFinalized(_from, _to, _amount, _extraData);
        bool success = SafeCall.call(_to, gasleft(), _amount, hex"");
        require(success, "StandardBridge: ETH transfer failed");

    }

    /**
     * @notice Finalizes an ERC20 bridge on this chain. Can only be triggered by the other
     *         StandardBridge contract on the remote chain.
     *
     * @param _localToken  Address of the ERC20 on this chain.
     * @param _remoteToken Address of the corresponding token on the remote chain.
     * @param _from        Address of the sender.
     * @param _to          Address of the receiver.
     * @param _amount      Amount of the ERC20 being bridged.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function finalizeBridgeERC20(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    ) public onlyOtherBridge override {
        if (_isOptimismMintableERC20(_localToken)) {
            require(
                _isCorrectTokenPair(_localToken, _remoteToken),
                "StandardBridge: wrong remote token for Optimism Mintable ERC20 local token"
            );

            OptimismMintableERC20(_localToken).mint(_to, _amount);
        } else {

            uint256 balanceBefore = IERC20(_localToken).balanceOf(address(this));
            IERC20(_localToken).safeTransfer(_to, _amount);
            uint256 balanceAfter = IERC20(_localToken).balanceOf(address(this));
            uint256 sentAmount = balanceBefore - balanceAfter;

            deposits[_localToken][_remoteToken] = deposits[_localToken][_remoteToken] - sentAmount;
        }

        // Emit the correct events. By default this will be ERC20BridgeFinalized, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }

    /**
* @notice Finalizes an MNT bridge on this chain. Can only be triggered by the other
     *         StandardBridge contract on the remote chain.
     *
     * @param _from        Address of the sender.
     * @param _to          Address of the receiver.
     * @param _amount      Amount of the MNT being bridged.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function finalizeBridgeMNT(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    ) public payable override onlyOtherBridge {
        require(_to != address(this), "StandardBridge: cannot send to self");
        require(_to != address(MESSENGER), "StandardBridge: cannot send to messenger");

        IERC20(L1_MNT_ADDRESS).safeTransferFrom(address(MESSENGER), _to, _amount);

        // Emit the correct events. By default this will be ERC20BridgeFinalized, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitMNTBridgeFinalized(_from, _to, _amount, _extraData);
    }

    /**
 * @notice Initiates a bridge of ETH through the CrossDomainMessenger.
     *
     * @param _from        Address of the sender.
     * @param _to          Address of the receiver.
     * @param _amount      Amount of ETH being bridged.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function _initiateBridgeETH(
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    ) internal override {
        require(
            msg.value == _amount,
            "L1StandardBridge: bridging ETH must include sufficient ETH value"
        );

        // Emit the correct events. By default this will be _amount, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitETHBridgeInitiated(_from, _to, _amount, _extraData);
        uint256 zeroMNTValue = 0;
        MESSENGER.sendMessage{value: msg.value}(
            zeroMNTValue,
            address(OTHER_BRIDGE),
            abi.encodeWithSelector(
                L2StandardBridge.finalizeBridgeETH.selector,
                _from,
                _to,
                _amount,
                _extraData
            ),
            _minGasLimit
        );
    }

    /**
 * @notice Sends ERC20 tokens to a receiver's address on the other chain.
     *
     * @param _localToken  Address of the ERC20 on this chain.
     * @param _remoteToken Address of the corresponding token on the remote chain.
     * @param _to          Address of the receiver.
     * @param _amount      Amount of local tokens to deposit.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function _initiateBridgeERC20(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    ) internal override {
        require(_localToken != address(0) && _remoteToken != Predeploys.BVM_ETH,
            "L1StandardBridge: BridgeERC20 do not support ETH bridging.");
        require(_localToken != L1_MNT_ADDRESS && _remoteToken != address(0x0),
            "L1StandardBridge: BridgeERC20 do not support MNT bridging.");

        if (_isOptimismMintableERC20(_localToken)) {
            require(
                _isCorrectTokenPair(_localToken, _remoteToken),
                "StandardBridge: wrong remote token for Optimism Mintable ERC20 local token"
            );

            OptimismMintableERC20(_localToken).burn(_from, _amount);
        } else {
            uint256 balanceBefore = IERC20(_localToken).balanceOf(address(this));
            IERC20(_localToken).safeTransferFrom(_from, address(this), _amount);
            uint256 balanceAfter = IERC20(_localToken).balanceOf(address(this));
            uint256 receivedAmount = balanceAfter - balanceBefore;
            deposits[_localToken][_remoteToken] = deposits[_localToken][_remoteToken] + receivedAmount;
        }

        // Emit the correct events. By default this will be ERC20BridgeInitiated, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        uint256 zeroMNTValue = 0;
        MESSENGER.sendMessage(
            zeroMNTValue,
            address(OTHER_BRIDGE),
            abi.encodeWithSelector(
                L2StandardBridge.finalizeBridgeERC20.selector,
                // Because this call will be executed on the remote chain, we reverse the order of
                // the remote and local token addresses relative to their order in the
                // finalizeBridgeERC20 function.
                _remoteToken,
                _localToken,
                _from,
                _to,
                _amount,
                _extraData
            ),
            _minGasLimit
        );
    }

    /**
 * @notice Sends MNT tokens to a receiver's address on the other chain.
     *
     * @param _to          Address of the receiver.
     * @param _amount      Amount of local tokens to deposit.
     * @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
     * @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
     *                     not be triggered with this data, but it will be emitted and can be used
     *                     to identify the transaction.
     */
    function _initiateBridgeMNT(
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    ) internal override {
        require(msg.value==0, "L1StandardBridge: deposit MNT should not include ETH value.");
        IERC20(L1_MNT_ADDRESS).safeTransferFrom(_from, address(this), _amount);
        // L1StandardBridge: approve for L1 MNT either reverts or returns true, there is no case in
        // which its result value is false.
        IERC20(L1_MNT_ADDRESS).approve(address(MESSENGER), _amount);

        // Emit the correct events. By default this will be ERC20BridgeInitiated, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitMNTBridgeInitiated(_from, _to, _amount, _extraData);
        MESSENGER.sendMessage{value: msg.value}(
            _amount,
            address(OTHER_BRIDGE),
            abi.encodeWithSelector(
                L2StandardBridge.finalizeBridgeMNT.selector,
                // Because this call will be executed on the remote chain, we reverse the order of
                // the remote and local token addresses relative to their order in the
                // finalizeBridgeERC20 function.
                _from,
                _to,
                _amount,
                _extraData
            ),
            _minGasLimit
        );
    }
}