Connection problem

[iw2fvo]

Good Day,
OpenCNCPilot installed on my win_7 PC.
GRBL 1.1 e installed on Arduino and working well with my CNC.
Problem:

Machine/setting : it allows the selection of com_6 port at 115200 baud_rate.
Connect : it says it is already connected.
Manual: I wrote : " G0 X15 " but all the buttons are NOT ACTIVE.
File/Open : I select a GRBL file created with Inkscape and working on the CNC: The program says " Method not found ... etc ".
Any direction to proceed please ?
Thanks
Ambro

[martin2250]

Hi,
just for completeness, do you have .NET 4.6 installed?
If the problem persists, please post screenshots and gcode files that had the problem.

[iw2fvo]

Hi, my PC runs  windows 7 _64 bit and 8 GRAM. Net 4.5 is installed.When I  try to load net 4.6 I got a message saying that this OS does not support 4.6 .Any other possibility for me please ?thanksAmbro On Tuesday, January 10, 2017 1:57 PM, Martin Pittermann <notifications@github.com> wrote: Hi, just for completeness, do you have .NET 4.6 installed? If the problem persists, please post screenshots and gcode files that had the problem.— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

[martin2250]

No, OpenCNCPilot can only run on machines with .NET 4.6.
According to MS, Windows 7 supports .NET 4.6:
https://www.microsoft.com/en-us/download/details.aspx?id=53344

[iw2fvo]

Thanks Martin, very good indication :Win 7 needs SP1 to accept net 4.6.2.  Now I can connect to the CNC, I can manually control the CNC and I can import GCODE files.Could you please spend other few words indicating to me the steps required to apply the Z probing / correction to my GCODE files ?Thanks again for the great assistance.Regards,Ambro On Tuesday, January 10, 2017 5:21 PM, Martin Pittermann <notifications@github.com> wrote: No, OpenCNCPilot can only run on machines with .NET 4.6. According to MS, Windows 7 supports .NET 4.6: https://www.microsoft.com/en-us/download/details.aspx?id=53344— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

[vyanez]

Hi everyone, as soon I connect my machine on Machine settings it start the spindle and goes all the way down without any stop. Have I configured something in a wrong way?

[luizabbadia]

I have one proble almost like this and it was bad grounding. My 24V spindle power supply wasn´t grounded and this was the problem.After grounding everything was fine.

…

On Thu, Jan 12, 2017 at 10:44 PM, Victor ***@***.***> wrote: Hi everyone, as soon I connect my machine on Machine settings it start the spindle and goes all the way down without any stop. Have I configured something in a wrong way? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#5 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AFKGboezOjSdWluAt8KSR7hIlWylkgbnks5rRsjzgaJpZM4LeO0o> .

-- Sds L.Abbadia

[martin2250]

@iw2fvo applying the height map should be as simple as pressing "apply height map". See the video for all the steps in the process, if you have any more questions, feel free to ask.

[martin2250]

@vyanez please don't hijack unrelated issues.
does it happen right after clicking "connect" or is it a connection problem?
If it's not a problem with the connection please open a new issue. thanks!