EMUPS4PAIRING is not working on non-Teensy boards

[cwlmyjm]

Hi, I am currently use GIMX on my pi 3b with arduino board with 32u4, which is conncet directly on UART to pi and connect to PS4 with USB. This plan work fine, but now I want to try bluetooth plan. The bluethooth is CSR8510, but I got stuck at step 7, because it seems that GIMX can not recognize my arduino board and ask me to plug one. I also try UART-USB adapter to connect my board, but the board was still not recognizable. Both plans work fine with GIMX with ttyAMA0 or ttyUSB0.

[cwlmyjm]

Emmm, it seems I forget the firmware. I will comment after trying new firmware. QWQ

[cwlmyjm]

Emmm, I have load firmware EMUPS4PAIRING, but it still not recognize my board. QWQ

[Cybereu]

I had problem with this firmware too, when I wanna use Bluetooth I upload this old firmware.
https://www.dropbox.com/s/20zpo3dbprjwa8k/atmega32u4.hex?dl=0&m=

[cwlmyjm]

@Cybereu Finally, I bought a teensy 2.0 board and it works fine on teensy. I will try the firmware you suggest, very thanks!

[matlo]

I'm reopening the issue as I'm hoping to fix it. Thanks for reporting.

[ElliotZac]

Hello everyone,
I am trying to get my Teensy 2.0++ "homemade" gimx adapter to work with my newly acquired RPi Zero W. I have followed the instructions for RPi but I am struggling when it comes to creating a new pairing. My RPi recognizes my DS4 controller but it cannot recognize the Teensy board. I am using this Teensy board 2 years now with my Windows desktop and laptop to play with KB&M on my PS4. Do you have any suggestions on how to proceed in order to overcome this problem?
Let me know if you need any additional info. Thanks in advance. ;)

[matlo]

Any reason to use the bluetooth method when you have an adapter?

[ElliotZac]

Hey @matlo. Thanks for the reply. I would like to "upgrade my setup" in a way, use my KB+M for some gaming in the living room and also avoid the cable mess that it is created every time I do that.

[matlo]

Easiest way is getting a "Pro micro" clone.