Skip to content

Latest commit

 

History

History
31 lines (26 loc) · 1.52 KB

README.md

File metadata and controls

31 lines (26 loc) · 1.52 KB

Flash CHIP from Archlinux

A script that simplyfies the flashing process for the C.H.I.P and PocketC.H.I.P Computer. It is Designed to run on ArchLinux. Fixed some errors from an old script. (Check https://github.com/richardschembri/Flash-CHIP for more information).

Disclaimer

Run these scripts at your own risk!

Instructions

  1. Remove the C.H.I.P from its case (in case you have a Pocket C.H.I.P).
  2. Connect the FEL and a GND(Ground) pin of the C.H.I.P with a wire or paperclip.
  3. Connect the C.H.I.P micro USB port to a USB port of your ArchLinux machine.
  4. In the terminal of your ArchLinux machine run the following commands:
  5. Make sure that the LEDs beside the micro USB port of the C.H.I.P have turned on
    • git clone https://github.com/maxaubel/Flash-Chip-Arch to clone this repository.
    • cd into the location where you stored this repository.
    • run sudo chmod +x Flash.sh
    • run ./Flash.sh
    • Select the image you wish to flash on your CHIP.
    • You might be prompted for your sudo password.
    • The script should run automatically from this point on.

Further setup on the C.H.I.P

When you boot in the C.H.I.P, in order to be use apt-get update make sure to remove the sources related to NextThing.co in /etc/apt/sources.list

References