Skip to content

Latest commit

 

History

History
301 lines (237 loc) · 11.6 KB

README.md

File metadata and controls

301 lines (237 loc) · 11.6 KB

Board Farm

Boardfarm is an open-source framework that was developed at Qualcomm to automate testing of OpenWrt routers and other devices. When used with continuous integration servers, such as Jenkins, boardfarm tests new code commits and nightly builds by flashing software or ipk files onto devices and running tests.

Tests are located in individual files in the "tests" directory. Tests include networking tests (e.g. ping, iperf, netperf), functionality tests (e.g. restart firewall or daemons), wifi tests, ipv4 and ipv6 tests, stability tests, and more.

The simplest tests consist of commands to type expected output. These tests use Pexpect to connect to devices and type commands. Examples and explanations of tests are shown later in this document.

Test suites are located in testsuites.cfg and are simply lists of test names. Results of running a test suite are stored in a nicely formated html file that can be emailed to interested parties or sent to a database.

Getting involved

Have a question about BoardFarm? Want to know the best way to get involved? Found a bug? Here are the BoardFarm communication channels:

Software Setup

If you are a Linux user, and wish to run and/or develop tests, please clone this repository and then install needed libaries:

apt-get install python-pip curl python-tk libsnmp-dev snmp-mibs-downloader
cd openwrt/
pip install -r requirements.txt

The file config.py is the main configuration. For example, it sets the location of the file that describes the available hardware.

Compiling Qemu to simulate devices

Qemu does full system simulation, and boardfarm can use that tool to run tests on simulated devices (e.g. a simulated OpenWrt router). If you want to use qemu, you will want a recent version (3.0 or higher). You may have to compile on your own system, and if so here's how:

sudo apt-get update
sudo apt-get install build-essential zlib1g-dev pkg-config \
    libglib2.0-dev binutils-dev libboost-all-dev autoconf \
    libtool libssl-dev libpixman-1-dev libpython-dev python-pip \
    python-capstone virtualenv wget
wget https://download.qemu.org/qemu-4.0.0.tar.xz
tar xvJf qemu-4.0.0.tar.xz
cd qemu-4.0.0
./configure
make
sudo make install

Getting Docker for simulated devices

Docker is also useful for creating simulated devices for running tests. To get the latest stable docker and set it up correctly:

sudo apt-get update
sudo apt-get install apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
sudo apt-get update
sudo apt-get install -y docker-ce
# Add your user to the docker group so that you can run docker without sudo
sudo usermod -aG docker $USER

Hardware Setup

To setup your own remotely-accessible boards, see BOARD_FARM.md in the docs directory. A "Board Farm" makes devices available over the network and this software connects to available devices to run tests. When a user is using a device, no one else can access or modify it.

Sample Commands

List available boards:

./bft -i

List available tests:

./bft -l

Connect to any available board of a certain type:

./bft -b ap135

Run a test case on a specific board:

./bft -n board01 -e MyTest

Run a test on any available board:

./bft -b ap148 -e MyTest

Flash some kernel and rootfs images to an available board, and run a specific test:

./bft -b ap135 -k http://10.0.0.8/~john/openwrt-ar71xx-generic-ap135-kernel.bin -r http://10.0.0.8/~john/openwrt-ar71xx-generic-ap135-rootfs-squashfs.bin -e MyTest

Flash some meta image to an available board:

./bft -b ap148 http://10.0.0.8/~john/nand-ipq806x-single.img -x flash_only

See all available command-line options:

./bft -h

Example Test Case 1

The following test types a command on a device to check whether a component is installed or not. This test will pass if no exception is thrown.

class AllJoynInstalled(rootfs_boot.RootFSBootTest):
    '''AllJoyn package is installed.'''
    def runTest(self):
        board.sendline('opkg info alljoyn')
        board.expect('Package: alljoyn', timeout=4)
        board.expect('ok installed')
        board.expect(prompt)
  • AllJoynInstalled : A unique name for your test case.
  • '''AllJoyn package is installed.''' : A one sentence description of your test.
  • sendline() : types a command on a device.
  • expect() : string or regular expression to search for in the output from the device. If no match is seen within 30 seconds, throw an exeption (the test case then fails). Change search time with the timeout argument.
  • prompt : A regular expression that matches the prompt of openwrt and linux prompts.

Example Test Case 2

"Regular Expressions" are a very powerful way of parsing and making sense of text output. This example checks memory use on the device by using regular expressions and "capture groups".

class MemoryUse(rootfs_boot.RootFSBootTest):
    '''Checked memory use.'''
    def runTest(self):
        board.sendline('cat /proc/meminfo')
        board.expect('MemTotal:\s+(\d+) kB', timeout=5)
        mem_total = int(board.match.group(1))
        board.expect('MemFree:\s+(\d+) kB')
        mem_free = int(board.match.group(1))
        board.expect(prompt)
        mem_used = mem_total - mem_free
        self.result_message = 'Used memory: %s MB. Free memory: %s MB.' % (mem_used/1024, mem_free/1024)
  • /proc/meminfo : This is a file that contains information about memory use in linux. Each line contains a name, a value and a unit:
root@OpenWrt:/# cat /proc/meminfo
MemTotal:         126372 kB
MemFree:           35720 kB
Buffers:               0 kB
Cached:            23056 kB
SwapCached:            0 kB
Active:            45164 kB
Inactive:          10336 kB
  • 'MemTotal:\s+(\d+) kB' : This regular expression looks for the string "MemTotal:", followed by one or more spaces, followed by one or more digits, followed by the string " kB". The paretheses are special, because putting them around something, such as (\d+), creates a capture group. Every pair of paretheses in a regular expression is a new capture group.
  • board.match.group(1) : This returns the string within the first capture group. In this case, it is one or more digits, e.g. "126372".

Example Test Case 3

Other devices are availble for use. In the case of routers there is at least a device connected to both a LAN port and a WAN port. Commands can be sent do these devices by using lan.sendline() and wan.sendline().

class iPerfTest(rootfs_boot.RootFSBootTest):
    '''iPerf from LAN to WAN'''
    def runTest(self):
        wan.sendline('iperf -s > /dev/null &')
        wan.expect(prompt)
        lan.sendline('iperf -t 50 -P 2 -c 192.168.0.1')
        lan.expect('Client connecting to')
        lan.expect(prompt, timeout=60)
        wan.sendline('killall -9 iperf')
        wan.expect(prompt)
    def recover(self):
        lan.sendcontrol('c')
  • wan.sendline('iperf -s > /dev/null &') : This runs the iperf server command on the device connected to the WAN port.
  • lan.sendline('iperf -t 50 -P 2 -c 192.168.0.1') : This runs the iperf client command on the device connected to the LAN port.
  • recover : This function only runs if an uncaught exception is thrown within runTest.
  • lan.sendcontrol('c') : Type CTRL-C on the device connected to the LAN port. Since the iperf client command can fail or hang the command prompt, putting this in the recover fuction is a good safety measure to prevent hanging the prompt and interfering with tests that follow.

Test Suites

A test suite is a list of test cases. Several are already defined in in the file testsuites.cfg. For example:

[basic]
RootFSBootTest
OpenwrtVersion
OpkgList
KernelModules
MemoryUse
InterfacesShow
LanDevPingRouter
RouterPingWanDev
LanDevPingWanDev

Optionally, test suite may reference (using @) any other previously defined test suites to include all the test cases it contains. For example:

[basic-offline]
RootFSBootTest
OpenwrtVersion
OpkgList
KernelModules
MemoryUse
InterfacesShow

[basic]
@basic-offline
LanDevPingRouter
RouterPingWanDev
LanDevPingWanDev

To run a test suite on an any available board of type "ap148" simply type:

./bft --testsuite basic -b ap148

Test Results

A test can finish in one of three states: PASS, FAIL, or SKIP.

If an uncaught exception is thrown (such as by board.expect('something')), then the test is marked as a FAIL - otherwise it is marked as a PASS.

A result of SKIP is a special case. Tests can check for certain conditions - like check that a component is installed - and leave the test if those conditions are not met. An example:

class SambaPerf(vfat_perf.VFatPerf):
    def runTest(self):
        try:
            board.sendline('opkg list | grep samba')
            board.expect('samba.*- .*\r\n')
        except:
            self.skipTest("Samba not installed.")

General Guidelines for Automated Tests

The best automated tests share a few qualities:

  • They are short - Typically 5 to 50 lines of code.
  • They contain little logic - Tests should be less complicated than the things they are testing.
  • They are robust - Tests should be more stable than the things they are testing.
  • They are easy to read - Tests should follow the PEP8 Style Guide.

The goal is to catch bugs in the software being tested. It is an annoying distraction when tests themselves crash. Keep your tests simple so that others can easily figure them out.

Boardfarm overlays

Recently support for having overlays in a separate directory (e.g. a separat git repository was added. This allows your own private tests, boards, and testsuites, templates that you want to keep separate for whatever reason. It's expected that if this is not private you can create a git repo and share your layer with others.

The layout of the overlay will look exactly the same as the boardfarm repo:

my_overlay/
├── devices
│   ├── my_device.py
├── html
│   └── template_results.html
├── tests
│   ├── this.py
│   ├── that.py
│   └── foobar.py
└── testsuites.cfg

Tests, devices, and testsuites in your overlay are added to the available tests, devices, testsuites. The email templates replace the ones from the main boardfarm repo

To specify an over lay you simply need to the space separated overlays to the BFT_OVERLAY environment variable:

export BFT_OVERLAY="../boardfarm-foo/ ../boardfarm-bar"

Then after running bft you should have access to your new tests, device types, etc

Good luck and thanks for reading!