Machnet: Easy kernel-bypass messaging between cloud VMs

Machnet provides an easy way for applications to reduce their datacenter networking latency via kernel-bypass (DPDK-based) messaging. Distributed applications like databases and finance can use Machnet as the networking library to get sub-100 microsecond tail latency at high message rates, e.g., 750,000 1KB request-reply messages per second on Azure F8s_v2 VMs with 61 microsecond P99.9 round-trip latency. We support a variety of cloud (Azure, AWS, GCP) and bare-metal platforms, OSs and NICs, evaluated in docs/PERFORMANCE_REPORT.md.

While there are several other DPDK-based network stacks, Machnet provides the following unique benefits:

• Specifically designed for and tested on public cloud VM environments
• Multiple applications on the same machine can use Machnet
• No need for DPDK expertise, or compiling the application with DPDK

Architecture: Machnet runs as a separate process on all machines where the application is deployed and mediates access to the DPDK NIC. Applications interact with Machnet over shared memory with a sockets-like API. Machnet processes in the cluster communicate with each other using DPDK.

Steps to use Machnet

1. Set up two machines with two NICs each

Machnet requires a dedicated NIC on each machine that it runs on. This NIC may be used by multiple applications that use Machnet.

On Azure, we recommend the following steps:

1. Create two VMs with accelerated networking enabled. The VMs will start up with one NIC each, named eth0. This NIC is never used by Machnet.
2. Shut-down the VMs.
3. Create two new accelerated NICs from the portal, with no public IPs, and add one to each VM.
4. After restarting, each VM should have another NIC named eth1, which will be used by Machnet.

The examples directory contains detailed scripts/instructions to launch VMs for Machnet.

2. Get the Docker image with a pre-built Machnet

You can either build the Docker image using the Dockerfile in this repo, or pull it from Github container registry. Pulling from GHCR requires an auth token:

1. Generate a Github personal access token for yourself (https://github.com/settings/tokens) with the read:packages scope. and store it in the GITHUB_PAT environment variable.
2. At https://github.com/settings/tokens, follow the steps to "Configure SSO" for this token.

# Install packages required to try out Machnet
sudo apt-get update
sudo apt-get install -y docker.io net-tools driverctl

# Reboot like below to allow non-root users to run Docker
sudo usermod -aG docker $USER && sudo reboot

# We assume that the Github token is stored as GITHUB_PAT
echo ${GITHUB_PAT} | docker login ghcr.io -u <github_username> --password-stdin
docker pull ghcr.io/microsoft/machnet/machnet:latest

3. Start the Machnet process on both VMs

Using DPDK often requires unbinding the dedicated NIC from the OS. This will cause the NIC to disappear from tools like ifconfig. Before this step, note down the IP and MAC address of the NIC, since we will need them later.

Below, we assume that the dedicated NIC is named eth1. These steps can be automated using a script like azure_start_machnet.sh that uses the cloud's metadata service to get the NIC's IP and MAC address.

MACHNET_IP_ADDR=`ifconfig eth1 | grep -w inet | tr -s " " | cut -d' ' -f 3`
MACHNET_MAC_ADDR=`ifconfig eth1 | grep -w ether | tr -s " " | cut -d' ' -f 3`

# If on Azure, use driverctl to unbind the NIC instead of dpdk-devbind.py:
sudo modprobe uio_hv_generic
DEV_UUID=$(basename $(readlink /sys/class/net/eth1/device))
sudo driverctl -b vmbus set-override $DEV_UUID uio_hv_generic

# Otherwise, use dpdk-devbind.py like so
# sudo <dpdk_dir>/usertools/dpdk-devbind.py --bind=vfio-pci <PCIe address of dedicated NIC>

# Start Machnet
echo "Machnet IP address: $MACHNET_IP_ADDR, MAC address: $MACHNET_MAC_ADDR"
git clone --recursive https://github.com/microsoft/machnet.git
cd machnet
./machnet.sh --mac $MACHNET_MAC_ADDR --ip $MACHNET_IP_ADDR

# Note: If you lose the NIC info, the Azure metadata server has it:
curl -s -H Metadata:true --noproxy "*" "http://169.254.169.254/metadata/instance?api-version=2021-02-01" | jq '.network.interface[1]'

4. Run the hello world example

At this point, the Machnet container/process is running on both VMs. We can now test things end-to-end with a client-server application.

# Build the Machnet helper library and hello_world example, on both VMs
./build_shim.sh
cd hello_world; make

# On VM #1, run the hello_world server
./hello_world --local <eth1 IP address of VM 1>

# On VM #2, run the hello_world client. This should print the reply from the server.
./hello_world --local <eth1 IP address of VM 1> --remote <eth1 IP address of VM 2>

5. Run the end-to-end benchmark

The Docker image contains a pre-built benchmark called msg_gen.

MSG_GEN="docker run -v /var/run/machnet:/var/run/machnet ghcr.io/microsoft/machnet/machnet:latest release_build/src/apps/msg_gen/msg_gen"

# On VM #1, run the msg_gen server
${MSG_GEN} --local_ip <eth1 IP address of VM 1>

# On VM #2, run the msg_gen client
${MSG_GEN} --local_ip <eth1 IP address of VM 1> --remote_ip <eth1 IP address of VM 2>

The client should print message rate and latency percentile statistics. msg_gen --help lists all the options available.

We can also build msg_gen from source without DPDK or rdma_core:

cd machnet
rm -rf build; mkdir build; cd build; cmake -DCMAKE_BUILD_TYPE=Release ..; make -j
MSG_GEN="~/machnet/build/src/apps/msg_gen/msg_gen"

Machnet API

See machnet.h for the full API documentation. Applications use the following steps to interact with the Machnet service:

• Initialize the Machnet library using machnet_init().
• In every thread, create a new shared-memory channel to Machnet using machnet_attach().
• Listen on a port using machnet_listen().
• Connect to remote processes using machnet_connect().
• Send and receive messages using machnet_send() and machnet_recv().

Developing Machnet

See CONTRIBUTING.md. for instructions on how to build and test Machnet.