WindowsDefender.adml

<policyDefinitionResources xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" revision="1.0" schemaVersion="1.0" xmlns="http://schemas.microsoft.com/GroupPolicy/2006/07/Policysecurity intelligence">
<displayName>enter display name here</displayName>
<description>enter description here</description>
<resources>
    <stringTable>
    <string id="AntiSpywareDefender">Microsoft Defender Antivirus</string>
    <string id="AntiSpyware">Endpoint Protection</string>
    <string id="Exclusions">Exclusions</string>
    <string id="Features">Features</string>
    <string id="DeviceControl">Device Control</string>
    <string id="ExploitGuard">Microsoft Defender Exploit Guard</string>
    <string id="ExploitGuard_ASR">Attack Surface Reduction</string>
    <string id="ExploitGuard_ControlledFolderAccess">Controlled Folder Access</string>
    <string id="ExploitGuard_NetworkProtection">Network Protection</string>
    <string id="NetworkRealtimeInspection">Network Inspection System</string>
    <string id="NetworkRealtimeInspection_Exclusions">Exclusions</string>
    <string id="Quarantine">Quarantine</string>
    <string id="RealtimeProtection">Real-time Protection</string>
    <string id="Remediation">Remediation</string>
    <string id="Reporting">Reporting</string>
    <string id="Scan">Scan</string>
    <string id="SignatureUpdate">Security Intelligence Updates</string>
    <string id="Spynet">MAPS</string>
    <string id="Threats">Threats</string>
    <string id="ClientInterface">Client Interface</string>
    <string id="MpEngine">MpEngine</string>
    <string id="AllowFastServiceStartup">Allow antimalware service to startup with normal priority</string>
    <string id="AllowFastServiceStartup_Explain">This policy setting controls the load priority for the antimalware service. Increasing the load priority will allow for faster service startup, but may impact performance.

    If you enable or do not configure this setting, the antimalware service will load as a normal priority task.

    If you disable this setting, the antimalware service will load as a low priority task.</string>

    <string id="MeteredConnectionUpdates">Allows Microsoft Defender Antivirus to update and communicate over a metered connection.</string>
    <string id="MeteredConnectionUpdates_Explain">
    Disabled (Default): 
    Updates and communications are not allowed over metered connections.

    Enabled: 
    Allow managed devices to update through metered connections. Data charges may apply.</string>
    <string id="HideExclusionsFromLocalAdmins">Control whether or not exclusions are visible to Local Admins.</string>
    <string id="HideExclusionsFromLocalAdmins_Explain">
    This policy setting controls whether or not exclusions are visible to Local Admins.  For end users (that are not Local Admins) exclusions are not visible, whether or not this setting is enabled.
    Disabled(Default):
        If you disable or do not configure this setting, Local Admins will be able to see exclusions in the Windows Security App or via PowerShell.

    Enabled: 
        If you enable this setting, Local Admins will no longer be able to see the exclusion list in Windows Security App or via PowerShell.
        Note: Applying this setting will not remove exclusions, it will only prevent them from being visible to Local Admins. This is reflected in Get-MpPreference.</string>
    <string id="AllowNetworkProtectionOnWinServer">This settings controls whether Network Protection is allowed to be configured into block or audit mode on Windows Server.</string>
    <string id="AllowNetworkProtectionOnWinServer_Explain">
    Disabled (Default): 
    If Not Configured or Disabled, network protection is not allowed to be configured into block or audit mode on Windows Server.

    Enabled: 
    If Enabled, administrators can control whether Network Protection is allowed to be configured into block or audit mode on Windows Server.
    Note, that this configuration is dependent on the EnableNetworkProtection configuration. If this configuration is false, EnableNetworkProtection will be ignored, otherwise network protection will start on Windows Server depending on the value of EnableNetworkProtection.</string>
    <string id="DisableDatagramProcessing">This setting controls datagram processing for network protection.</string>
    <string id="DisableDatagramProcessing_Explain">
    Enabled (Default): 
    If Not Configured or Disabled, datagram processing will be enabled for network protection.

    Enabled: 
    If Enabled, datagram processing will be disabled for network protection.</string>
    <string id="DisableAutoExclusions">Turn off Auto Exclusions</string>
    <string id="DisableAutoExclusions_Explain">
        Allows an administrator to specify if Automatic Exclusions feature for Server SKUs should be turned off.

        Disabled (Default):
        Microsoft Defender will exclude pre-defined list of paths from the scan to improve performance.

        Enabled:
        Microsoft Defender will not exclude pre-defined list of paths from scans. This can impact machine performance in some scenarios.

        Not configured:
        Same as Disabled.
    </string>
    <string id="DisableAntiSpyware">Turn off Endpoint Protection</string>
    <string id="DisableAntiSpyware_Explain">This policy setting turns off Endpoint Protection.

    If you enable this policy setting, Endpoint Protection does not run, and computers are not scanned for malware or other potentially unwanted software.

    If you disable or do not configure this policy setting, by default Endpoint Protection runs and computers are scanned for malware and other potentially unwanted software.
    </string>
    <string id="DisableAntiSpywareDefender">Turn off Microsoft Defender Antivirus</string>
    <string id="DisableAntiSpywareDefender_Explain">This policy setting turns off Microsoft Defender Antivirus.
    
    If you enable this policy setting, Microsoft Defender Antivirus does not run, and will not scan computers for malware or other potentially unwanted software.

    If you disable this policy setting, Microsoft Defender Antivirus will run regardless of any other installed antivirus product.

    If you do not configure this policy setting, Windows will internally manage Microsoft Defender Antivirus. If you install another antivirus program, Windows automatically disables Microsoft Defender Antivirus. Otherwise, Microsoft Defender Antivirus will scan your computers for malware and other potentially unwanted software.

    Enabling or disabling this policy may lead to unexpected or unsupported behavior. It is recommended that you leave this policy setting unconfigured.</string>
    <string id="DisableLocalAdminMerge">Configure local administrator merge behavior for lists</string>
    <string id="DisableLocalAdminMerge_Explain">This policy setting controls whether or not complex list settings configured by a local administrator are merged with Group Policy settings. This setting applies to lists such as threats and Exclusions.

    If you disable or do not configure this setting, unique items defined in Group Policy and in preference settings configured by the local administrator will be merged into the resulting effective policy. In the case of conflicts, Group policy Settings will override preference settings.

    If you enable this setting, only items defined by Group Policy will be used in the resulting effective policy. Group Policy settings will override preference settings configured by the local administrator.</string>
    <string id="DisableRoutinelyTakingAction">Turn off routine remediation</string>
    <string id="DisableRoutinelyTakingActionDefender_Explain">
    This policy setting allows you to configure whether Microsoft Defender Antivirus automatically takes action on all detected threats. The action to be taken on a particular threat is determined by the combination of the policy-defined action, user-defined action, and the signature-defined action.

    If you enable this policy setting, Microsoft Defender Antivirus does not automatically take action on the detected threats, but prompts users to choose from the actions available for each threat.

    If you disable or do not configure this policy setting, Microsoft Defender Antivirus automatically takes action on all detected threats after a nonconfigurable delay of approximately five seconds.</string>
    <string id="DisableRoutinelyTakingAction_Explain">
        This policy setting allows you to configure whether Endpoint Protection automatically takes action on all detected threats. The action to be taken on a particular threat is determined by the combination of the policy-defined action, user-defined action, and the signature-defined action.

        If you enable this policy setting, Endpoint Protection does not automatically take action on the detected threats, but prompts users to choose from the actions available for each threat.

        If you disable or do not configure this policy setting, Endpoint Protection automatically takes action on all detected threats after a nonconfigurable delay of approximately five seconds.
    </string>      
    <string id="ProxyBypass">Define addresses to bypass proxy server</string>
    <string id="ProxyBypass_Explain">This policy, if defined, will prevent antimalware from using the configured proxy server when communicating with the specified IP addresses. The address value should be entered as a valid URL.

    If you enable this setting, the proxy server will be bypassed for the specified addresses.

    If you disable or do not configure this setting, the proxy server will not be bypassed for the specified addresses.</string>
    <string id="ProxyPacUrl">Define proxy auto-config (.pac) for connecting to the network</string>
    <string id="ProxyPacUrl_Explain">This policy setting defines the URL of a proxy .pac file that should be used when the client attempts to connect the network for security intelligence updates and MAPS reporting. If the proxy auto-config fails or if there is no proxy auto-config specified, the client will fall back to the alternative options (in order):
      1. Proxy server (if specified)
      2. Proxy .pac URL (if specified)
      3. None
      4. Internet Explorer proxy settings
      5. Autodetect

      If you enable this setting, the proxy setting will be set to use the specified proxy .pac according to the order specified above.

      If you disable or do not configure this setting, the proxy will skip over this fallback step according to the order specified above.</string>
    <string id="ProxyServer">Define proxy server for connecting to the network</string>
    <string id="ProxyServer_Explain">This policy setting allows you to configure the named proxy that should be used when the client attempts to connect to the network for security intelligence updates and MAPS reporting. If the named proxy fails or if there is no proxy specified, the client will fall back to the alternative options (in order):
      1. Proxy server (if specified)
      2. Proxy .pac URL (if specified)
      3. None
      4. Internet Explorer proxy settings
      5. Autodetect

      If you enable this setting, the proxy will be set to the specified URL according to the order specified above. The URL should be proceeded with either http:// or https://.

      If you disable or do not configure this setting, the proxy will skip over this fallback step according to the order specified above.
    </string>
    <string id="RandomizeScheduleTaskTimes">Randomize scheduled task times</string>
    <string id="RandomizeScheduleTaskTimes_Explain">This policy setting allows you to configure the scheduled scan, and the scheduled security intelligence update, start time window in hours.

    If you disable or do not configure this setting, scheduled tasks will begin at a random time within 4 hours after the time specified in Task Scheduler.
    If you enable this setting, you can widen, or narrow, this randomization period. Specify a randomization window of between 1 and 23 hours.</string>
    <string id="SchedulerRandomizationTime">Configure scheduled task times randomization window</string>
    <string id="SchedulerRandomizationTime_Explain">This policy setting allows you to configure scheduled scan start time and the scheduled security intelligence update start time window in hours.

    If you disable or do not configure this setting, scheduled tasks will begin at a random time within an interval of 4 hours after the specified start time.
    If you enable this setting, you must pick a randomization window in hours. The possible randomization window interval is between 1 and 23 hours.</string>
    <string id="ServiceKeepAlive">Allow antimalware service to remain running always</string>
    <string id="ServiceKeepAlive_Explain">This policy setting allows you to configure whether or not the antimalware service remains running when antivirus and antispyware security intelligence is disabled. It is recommended that this setting remain disabled.

    If you enable this setting, the antimalware service will always remain running even if both antivirus and antispyware security intelligence is disabled.

    If you disable or do not configure this setting, the antimalware service will be stopped when both antivirus and antispyware security intelligence is disabled. If the computer is restarted, the service will be started if it is set to Automatic startup. After the service has started, there will be a check to see if antivirus and antispyware security intelligence is enabled. If at least one is enabled, the service will remain running. If both are disabled, the service will be stopped.</string>
    <string id="Root_PUAProtection">Configure detection for potentially unwanted applications</string>
    <string id="Root_PUAProtection_Explain">
        Enable or disable detection for potentially unwanted applications. You can choose to block, audit, or allow when potentially unwanted software is being downloaded or attempts to install itself on your computer.

        Enabled:
        Specify the mode in the Options section:
        -Block: Potentially unwanted software will be blocked.
        -Audit Mode: Potentially unwanted software will not be blocked, however if this feature would have blocked access if it were set to Block, then a record of the event will be in the event logs.

        Disabled:
        Potentially unwanted software will not be blocked.

        Not configured:
        Same as Disabled.
    </string>
    <string id="SupportLogLocation">Define the directory path to copy support log files</string>
    <string id="SupportLogLocation_Explain">This policy setting allows you to configure the directory path where the support log files would be copied to. The value of this setting should be a valid directory path.

    If you enable this setting, the support log files will be copied to the specified support log location path.

    If you disable or do not configure this setting, the support logs files will not be copied to any location.</string>
    <string id="Exclusions_Extensions">Extension Exclusions</string>
    <string id="Exclusions_Extensions_Explain">This policy setting allows you specify a list of file types that should be excluded from scheduled, custom, and real-time scanning. File types should be added under the Options for this setting. Each entry must be listed as a name value pair, where the name should be a string representation of the file type extension (such as "obj" or "lib"). The value is not used and it is recommended that this be set to 0.</string>
    <string id="Exclusions_Paths">Path Exclusions</string>
    <string id="Exclusions_Paths_Explain">This policy setting allows you to disable scheduled and real-time scanning for files under the paths specified or for the fully qualified resources specified. Paths should be added under the Options for this setting. Each entry must be listed as a name value pair, where the name should be a string representation of a path or a fully qualified resource name. As an example, a path might be defined as: "c:\Windows" to exclude all files in this directory. A fully qualified resource name might be defined as: "C:\Windows\App.exe". The value is not used and it is recommended that this be set to 0.</string>
    <string id="Exclusions_Processes">Process Exclusions</string>
    <string id="Exclusions_Processes_Explain">This policy setting allows you to disable real-time scanning for any file opened by any of the specified processes. This policy does not apply to scheduled scans. The process itself will not be excluded. To exclude the process, use the Path exclusion. Processes should be added under the Options for this setting. Each entry must be listed as a name value pair, where the name should be a string representation of the path to the process image. Note that only executables can be excluded. For example, a process might be defined as: "c:\windows\app.exe". The value is not used and it is recommended that this be set to 0.</string>
    <string id="Exclusions_IpAddresses">Ip Address Exclusions</string>
    <string id="Exclusions_IpAddresses_Explain">Allows an administrator to explicitly disable network packet inspection made by wdnisdrv on a particular set of IP addresses.</string>
    <string id="Nis_DisableProtocolRecognition">Turn on protocol recognition</string>
    <string id="Nis_DisableProtocolRecognition_Explain">This policy setting allows you to configure protocol recognition for network protection against exploits of known vulnerabilities.

    If you enable or do not configure this setting, protocol recognition will be enabled.

    If you disable this setting, protocol recognition will be disabled.</string>
    <string id="Nis_Consumers_IPS_DisableSignatureRetirement">Turn on definition retirement</string>
    <string id="Nis_Consumers_IPS_DisableSignatureRetirement_Explain">This policy setting allows you to configure definition retirement for network protection against exploits of known vulnerabilities. Definition retirement checks to see if a computer has the required security updates necessary to protect it against a particular vulnerability. If the system is not vulnerable to the exploit detected by a definition, then that definition is "retired". If all security intelligence for a given protocal are retired then that protocol is no longer parsed. Enabling this feature helps to improve performance. On a computer that is up-to-date with all the latest security updates, network protection will have no impact on network performance.

    If you enable or do not configure this setting, definition retirement will be enabled.

    If you disable this setting, definition retirement will be disabled.</string>
    <string id="Nis_Consumers_IPS_sku_differentiation_Signature_Set_Guid">Specify additional definition sets for network traffic inspection</string>
    <string id="Nis_Consumers_IPS_sku_differentiation_Signature_Set_Guid_Explain">This policy setting defines additional definition sets to enable for network traffic inspection. Definition set GUIDs should be added under the Options for this setting. Each entry must be listed as a name value pair, where the name should be a string representation of a definition set GUID. As an example, the definition set GUID to enable test security intelligence is defined as: “{b54b6ac9-a737-498e-9120-6616ad3bf590}”. The value is not used and it is recommended that this be set to 0.</string>
    <string id="Quarantine_LocalSettingOverridePurgeItemsAfterDelay">Configure local setting override for the removal of items from Quarantine folder</string>
    <string id="Quarantine_LocalSettingOverridePurgeItemsAfterDelay_Explain">This policy setting configures a local override for the configuration of the number of days items should be kept in the Quarantine folder before being removed. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Quarantine_PurgeItemsAfterDelay">Configure removal of items from Quarantine folder</string>
    <string id="Quarantine_PurgeItemsAfterDelay_Explain">This policy setting defines the number of days items should be kept in the Quarantine folder before being removed.

    If you enable this setting, items will be removed from the Quarantine folder after the number of days specified.

    If you disable or do not configure this setting, items will be kept in the quarantine folder indefinitely and will not be automatically removed.</string>

    <string id="RealtimeProtection_DisableSriptScanning">Turn on script scanning</string>
    <string id="RealtimeProtection_DisableSriptScanning_Explain">This policy setting allows you to configure script scanning.

    If you enable or do not configure this setting, script scanning will be enabled.

    If you disable this setting, script scanning will be disabled.</string>

    <string id="RealtimeProtection_DisableBehaviorMonitoring">Turn on behavior monitoring</string>
    <string id="RealtimeProtection_DisableBehaviorMonitoring_Explain">This policy setting allows you to configure behavior monitoring.

    If you enable or do not configure this setting, behavior monitoring will be enabled.

    If you disable this setting, behavior monitoring will be disabled.</string>
    <string id="RealtimeProtection_DisableIOAVProtection">Scan all downloaded files and attachments</string>
    <string id="RealtimeProtection_DisableIOAVProtection_Explain">This policy setting allows you to configure scanning for all downloaded files and attachments.

    If you enable or do not configure this setting, scanning for all downloaded files and attachments will be enabled.

    If you disable this setting, scanning for all downloaded files and attachments will be disabled.</string>
    <string id="RealtimeProtection_DisableOnAccessProtection">Monitor file and program activity on your computer</string>
    <string id="RealtimeProtection_DisableOnAccessProtection_Explain">This policy setting allows you to configure monitoring for file and program activity.

    If you enable or do not configure this setting, monitoring for file and program activity will be enabled.

    If you disable this setting, monitoring for file and program activity will be disabled.</string>
    <string id="RealtimeProtection_DisableRawWriteNotification">Turn on raw volume write notifications</string>
    <string id="RealtimeProtection_DisableRawWriteNotification_Explain">This policy setting controls whether raw volume write notifications are sent to behavior monitoring.

    If you enable or do not configure this setting, raw write notifications will be enabled.

    If you disable this setting, raw write notifications be disabled.</string>
    <string id="DisableRealtimeMonitoring">Turn off real-time protection</string>
    <string id="DisableRealtimeMonitoringDefender_Explain">This policy turns off real-time protection in Microsoft Defender Antivirus.

    Real-time protection consists of always-on scanning with file and process behavior monitoring and heuristics. When real-time protection is on, Microsoft Defender Antivirus detects malware and potentially unwanted software that attempts to install itself or run on your device, and prompts you to take action on malware detections.

    If you enable this policy setting, real-time protection is turned off. 

    If you either disable or do not configure this policy setting, real-time protection is turned on.</string>
    <string id="DisableRealtimeMonitoring_Explain">
    This policy setting turns off real-time protection prompts for known malware detection.

    Endpoint Protection alerts you when malware or potentially unwanted software attempts to install itself or to run on your computer.

    If you enable this policy setting, Endpoint Protection will not prompt users to take actions on malware detections.

    If you disable or do not configure this policy setting, Endpoint Protection will prompt users to take actions on malware detections.
    </string>
    <string id="RealtimeProtection_DisableScanOnRealtimeEnable">Turn on process scanning whenever real-time protection is enabled</string>
    <string id="RealtimeProtection_DisableScanOnRealtimeEnable_Explain">This policy setting allows you to configure process scanning when real-time protection is turned on. This helps to catch malware which could start when real-time protection is turned off.

    If you enable or do not configure this setting,  a process scan will be initiated when real-time protection is turned on.

    If you disable this setting, a process scan will not be initiated when real-time protection is turned on.</string>
    <string id="RealtimeProtection_IOAVMaxSize">Define the maximum size of downloaded files and attachments to be scanned</string>
    <string id="RealtimeProtection_IOAVMaxSize_Explain">This policy setting defines the maximum size (in kilobytes) of downloaded files and attachments that will be scanned.

    If you enable this setting, downloaded files and attachments smaller than the size specified will be scanned.

    If you disable or do not configure this setting, a default size will be applied.</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableBehaviorMonitoring">Configure local setting override for turn on behavior monitoring</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableBehaviorMonitoring_Explain">This policy setting configures a local override for the configuration of behavior monitoring. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableOnAccessProtection">Configure local setting override for monitoring file and program activity on your computer</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableOnAccessProtection_Explain">This policy setting configures a local override for the configuration of monitoring for file and program activity on your computer. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableIOAVProtection">Configure local setting override for scanning all downloaded files and attachments</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableIOAVProtection_Explain">This policy setting configures a local override for the configuration of scanning for all downloaded files and attachments. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableRealtimeMonitoring">Configure local setting override to turn on real-time protection</string>
    <string id="RealtimeProtection_LocalSettingOverrideDisableRealtimeMonitoring_Explain">This policy setting configures a local override for the configuration to turn on real-time protection. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="RealtimeProtection_LocalSettingOverrideRealtimeScanDirection">Configure local setting override for monitoring for incoming and outgoing file activity</string>
    <string id="RealtimeProtection_LocalSettingOverrideRealtimeScanDirection_Explain">This policy setting configures a local override for the configuration of monitoring for incoming and outgoing file activity. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="RealtimeProtection_RealtimeScanDirection">Configure monitoring for incoming and outgoing file and program activity</string>
    <string id="RealtimeProtection_RealtimeScanDirection_Explain">This policy setting allows you to configure monitoring for incoming and outgoing files, without having to turn off monitoring entirely. It is recommended for use on servers where there is a lot of incoming and outgoing file activity but for performance reasons need to have scanning disabled for a particular scan direction. The appropriate configuration should be evaluated based on the server role. 

    Note that this configuration is only honored for NTFS volumes. For any other file system type, full monitoring of file and program activity will be present on those volumes.

    The options for this setting are mutually exclusive:
    0 = Scan incoming and outgoing files (default)
    1 = Scan incoming files only
    2 = Scan outgoing files only

    Any other value, or if the value does not exist, resolves to the default (0).

    If you enable this setting, the specified type of monitoring will be enabled.

    If you disable or do not configure this setting, monitoring for incoming and outgoing files will be enabled.</string>
    <string id="RealtimeProtection_RealtimeScanDirection_0">bi-directional (full on-access)</string>
    <string id="RealtimeProtection_RealtimeScanDirection_1">scan only incoming (disable on-open)</string>
    <string id="RealtimeProtection_RealtimeScanDirection_2">scan only outgoing (disable on-close)</string>
    <string id="Remediation_LocalSettingOverrideScan_ScheduleTime">Configure local setting override for the time of day to run a scheduled full scan to complete remediation</string>
    <string id="Remediation_LocalSettingOverrideScan_ScheduleTime_Explain">This policy setting configures a local override for the configuration of the time to run a scheduled full scan to complete remediation. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Remediation_Scan_ScheduleDay">Specify the day of the week to run a scheduled full scan to complete remediation</string>
    <string id="Remediation_Scan_ScheduleDay_Explain">This policy setting allows you to specify the day of the week on which to perform a scheduled full scan in order to complete remediation. The scan can also be configured to run every day or to never run at all.

    This setting can be configured with the following ordinal number values:
    (0x0) Every Day
    (0x1) Sunday 
    (0x2) Monday
    (0x3) Tuesday
    (0x4) Wednesday
    (0x5) Thursday
    (0x6) Friday
    (0x7) Saturday
    (0x8) Never (default)

    If you enable this setting, a scheduled full scan to complete remediation will run at the frequency specified.

    If you disable or do not configure this setting, a scheduled full scan to complete remediation will run at a default frequency.</string>
    <string id="Remediation_Scan_ScheduleDay_0">Never</string>
    <string id="Remediation_Scan_ScheduleDay_1">Every Day</string>
    <string id="Remediation_Scan_ScheduleDay_2">Sunday</string>
    <string id="Remediation_Scan_ScheduleDay_3">Monday</string>
    <string id="Remediation_Scan_ScheduleDay_4">Tuesday</string>
    <string id="Remediation_Scan_ScheduleDay_5">Wednesday</string>
    <string id="Remediation_Scan_ScheduleDay_6">Thursday</string>
    <string id="Remediation_Scan_ScheduleDay_7">Friday</string>
    <string id="Remediation_Scan_ScheduleDay_8">Saturday</string>
    <string id="Remediation_Scan_ScheduleTime">Specify the time of day to run a scheduled full scan to complete remediation</string>
    <string id="Remediation_Scan_ScheduleTime_Explain">This policy setting allows you to specify the time of day at which to perform a scheduled full scan in order to complete remediation. The time value is represented as the number of minutes past midnight (00:00).  For example, 120 (0x78) is equivalent to 02:00 AM.  The schedule is based on local time on the computer where the scan is executing.

    If you enable this setting, a scheduled full scan to complete remediation will run at the time of day specified.

    If you disable or do not configure this setting, a scheduled full scan to complete remediation will run at a default time.</string>
    <string id="Reporting_AdditionalActionTimeout">Configure time out for detections requiring additional action</string>
    <string id="Reporting_AdditionalActionTimeout_Explain">This policy setting configures the time in minutes before a detection in the "additional action" state moves to the "cleared" state.</string>
    <string id="Reporting_CriticalFailureTimeout">Configure time out for detections in critically failed state</string>
    <string id="Reporting_CriticalFailureTimeout_Explain">This policy setting configures the time in minutes before a detection in the “critically failed” state to moves to either the “additional action” state or the “cleared” state.</string>
    <string id="Reporting_DisablegenericrePorts">Configure Watson events</string>
    <string id="Reporting_DisablegenericrePorts_Explain">This policy setting allows you to configure whether or not Watson events are sent.

    If you enable or do not configure this setting, Watson events will be sent.

    If you disable this setting, Watson events will not be sent.</string>
    <string id="Reporting_NonCriticalTimeout">Configure time out for detections in non-critical failed state</string>
    <string id="Reporting_NonCriticalTimeout_Explain">This policy setting configures the time in minutes before a detection in the "non-critically failed" state moves to the "cleared" state.</string>
    <string id="Reporting_RecentlyCleanedTimeout">Configure time out for detections in recently remediated state</string>
    <string id="Reporting_RecentlyCleanedTimeout_Explain">This policy setting configures the time in minutes before a detection in the "completed" state moves to the "cleared" state.</string>
    <string id="Reporting_WppTracingComponents">Configure Windows software trace preprocessor components</string>
    <string id="Reporting_WppTracingComponents_Explain">This policy configures Windows software trace preprocessor (WPP Software Tracing) components.</string>
    <string id="Reporting_WppTracingLevel">Configure WPP tracing level</string>
    <string id="Reporting_WppTracingLevel_Explain">This policy allows you to configure tracing levels for Windows software trace preprocessor (WPP Software Tracing). 
    Tracing levels are defined as:
    1 - Error
    2 - Warning
    3 - Info
    4 - Debug</string>
    <string id="Reporting_DisableEnhancedNotifications">Turn off enhanced notifications</string>
    <string id="Reporting_DisableEnhancedNotifications_Explain">
      Use this policy setting to specify if you want Microsoft Defender Antivirus enhanced notifications to display on clients.
      
      If you disable or do not configure this setting, Microsoft Defender Antivirus enhanced notifications will display on clients.
      
      If you enable this setting, Microsoft Defender Antivirus enhanced notifications will not display on clients.
    </string>
    <string id="Reporting_ServiceHealthReportInterval">Configure time interval for service health reports</string>
    <string id="Reporting_ServiceHealthReportInterval_Explain">This policy setting configures the time interval (in minutes) for the service health reports to be sent from endpoints.

    If you disable or do not configure this setting, the default value will be applied. The default value is set at 60 minutes (1 hour).

    If you configure this setting to 0, no service health reports will be sent.

    The maximum value allowed to be set is 14400 minutes (10 days).</string>
    <string id="Reporting_EnableDynamicSignatureDroppedEventReporting">Configure whether to report Dynamic Signature dropped events</string>
    <string id="Reporting_EnableDynamicSignatureDroppedEventReporting_Explain">This policy setting configures whether to report Dynamic Signature dropped events.

    If you do not configure this setting, the default value will be applied. The default value is set to disabled (such events are not reported).
    If you configure this setting to enabled, Dynamic Signature dropped events will be reported.
    If you configure this setting to disabled, Dynamic Signature dropped events will not be reported.</string>
      <string id="Scan_AllowPause">Allow users to pause scan</string>
    <string id="Scan_AllowPause_Explain">This policy setting allows you to manage whether or not end users can pause a scan in progress.

    If you enable or do not configure this setting, a new context menu will be added to the task tray icon to allow the user to pause a scan.

    If you disable this setting, users will not be able to pause scans.</string>
    <string id="Scan_ArchiveMaxDepth">Specify the maximum depth to scan archive files</string>
    <string id="Scan_ArchiveMaxDepth_Explain">This policy setting allows you to configure the maximum directory depth level into which archive files such as .ZIP or .CAB are unpacked during scanning. The default directory depth level is 0.

    If you enable this setting, archive files will be scanned to the directory depth level specified.

    If you disable or do not configure this setting, archive files will be scanned to the default directory depth level.</string>
    <string id="Scan_ArchiveMaxSize">Specify the maximum size of archive files to be scanned</string>
    <string id="Scan_ArchiveMaxSize_Explain">This policy setting allows you to configure the maximum size of archive files such as .ZIP or .CAB that will be scanned. The value represents file size in kilobytes (KB). The default value is 0 and represents no limit to archive size for scanning.

    If you enable this setting, archive files less than or equal to the size specified will be scanned.

    If you disable or do not configure this setting, archive files will be scanned according to the default value.</string>
    <string id="Scan_AvgCPULoadFactor">Specify the maximum percentage of CPU utilization during a scan</string>
    <string id="Scan_AvgCPULoadFactor_Explain">This policy setting allows you to configure the maximum percentage CPU utilization permitted during a scan. Valid values for this setting are a percentage represented by the integers 5 to 100. A value of 0 indicates that there should be no throttling of CPU utilization. The default value is 50.

    If you enable this setting, CPU utilization will not exceed the percentage specified.

    If you disable or do not configure this setting, CPU utilization will not exceed the default value.</string>
    <string id="CheckForSignaturesBeforeRunningScan">Check for the latest virus and spyware security intelligence before running a scheduled scan</string>
    <string id="CheckForSignaturesBeforeRunningScan_Explain">This policy setting allows you to manage whether a check for new virus and spyware security intelligence will occur before running a scan. 

    This setting applies to scheduled scans, but it has no effect on scans initiated manually from the user interface or to the ones started from the command line using "mpcmdrun -Scan".

    If you enable this setting, a check for new security intelligence will occur before running a scan.

    If you disable this setting or do not configure this setting, the scan will start using the existing security intelligence.</string>
    <string id="Scan_DisableArchiveScanning">Scan archive files</string>
    <string id="Scan_DisableArchiveScanning_Explain">This policy setting allows you to configure scans for malicious software and unwanted software in archive files such as .ZIP or .CAB files.

    If you enable or do not configure this setting, archive files will be scanned.

    If you disable this setting, archive files will not be scanned. However, archives are always scanned during directed scans.</string>
    <string id="Scan_DisableCatchupFullScan">Turn on catch-up full scan</string>
    <string id="Scan_DisableCatchupFullScan_Explain">This policy setting allows you to configure catch-up scans for scheduled full scans. A catch-up scan is a scan that is initiated because a regularly scheduled scan was missed.  Usually these scheduled scans are missed because the computer was turned off at the scheduled time. 

    If you enable this setting, catch-up scans for scheduled full scans will be turned on.  If a computer is offline for two consecutive scheduled scans, a catch-up scan is started the next time someone logs on to the computer.  If there is no scheduled scan configured, there will be no catch-up scan run. 

    If you disable or do not configure this setting, catch-up scans for scheduled full scans will be turned off.</string>
    <string id="Scan_ThrottleForScheduledScanOnly">CPU throttling type</string>
    <string id="Scan_ThrottleForScheduledScanOnly_Explain">This policy setting determines whether the maximum percentage CPU utilization permitted during a scan applies only to scheduled scans, or to both scheduled and custom scans (but not real-time protection). The maximum CPU utilization limit is also referred to as CPU throttling, or a CPU usage limit.

    The default value for this policy setting is True, which means CPU throttling is applied only to scheduled scans.

    If you either enable or do not configure this setting, CPU throttling will apply only to scheduled scans.

    If you disable this setting, CPU throttling will apply to scheduled and custom scans.</string>
    <string id="Scan_DisableCatchupQuickScan">Turn on catch-up quick scan</string>
    <string id="Scan_DisableCatchupQuickScan_Explain">This policy setting allows you to configure catch-up scans for scheduled quick scans. A catch-up scan is a scan that is initiated because a regularly scheduled scan was missed.  Usually these scheduled scans are missed because the computer was turned off at the scheduled time. 

    If you enable this setting, catch-up scans for scheduled quick scans will be turned on. If a computer is offline for two consecutive scheduled scans, a catch-up scan is started the next time someone logs on to the computer.  If there is no scheduled scan configured, there will be no catch-up scan run.

    If you disable or do not configure this setting, catch-up scans for scheduled quick scans will be turned off.</string>
    <string id="Scan_DisableEmailScanning">Turn on e-mail scanning</string>
    <string id="Scan_DisableEmailScanning_Explain">This policy setting allows you to configure e-mail scanning. When e-mail scanning is enabled, the engine will parse the mailbox and mail files, according to their specific format, in order to analyze the mail bodies and attachments. Several e-mail formats are currently supported, for example: pst (Outlook), dbx, mbx, mime (Outlook Express), binhex (Mac). Email scanning is not supported on modern email clients.
    
    If you enable this setting, e-mail scanning will be enabled.

    If you disable or do not configure this setting, e-mail scanning will be disabled.</string>
    <string id="Scan_DisableHeuristics">Turn on heuristics</string>
    <string id="Scan_DisableHeuristics_Explain">This policy setting allows you to configure heuristics. Suspicious detections will be suppressed right before reporting to the engine client. Turning off heuristics will reduce the capability to flag new threats. It is recommended that you do not turn off heuristics.

    If you enable or do not configure this setting, heuristics will be enabled.

    If you disable this setting, heuristics will be disabled.</string>
    <string id="Scan_DisablePackedExeScanning">Scan packed executables</string>
    <string id="Scan_DisablePackedExeScanning_Explain">This policy setting allows you to configure scanning for packed executables. It is recommended that this type of scanning remain enabled.

    If you enable or do not configure this setting, packed executables will  be scanned.

    If you disable this setting, packed executables will not be scanned.</string>
    <string id="Scan_DisableRemovableDriveScanning">Scan removable drives</string>
    <string id="Scan_DisableRemovableDriveScanning_Explain">This policy setting allows you to manage whether or not to scan for malicious software and unwanted software in the contents of removable drives, such as USB flash drives, when running a full scan.

    If you enable this setting, removable drives will be scanned during any type of scan.

    If you disable or do not configure this setting, removable drives will not be scanned during a full scan. Removable drives may still be scanned during quick scan and custom scan.</string>
    <string id="Scan_DisableReparsePointScanning">Turn on reparse point scanning</string>
    <string id="Scan_DisableReparsePointScanning_Explain">This policy setting allows you to configure reparse point scanning. If you allow reparse points to be scanned, there is a possible risk of recursion. However, the engine supports following reparse points to a maximum depth so at worst scanning could be slowed. Reparse point scanning is disabled by default and this is the recommended state for this functionality. 

    If you enable this setting, reparse point scanning will be enabled.

    If you disable or do not configure this setting, reparse point scanning will be disabled.</string>
    <string id="Scan_DisableRestorePoint">Create a system restore point</string>
    <string id="Scan_DisableRestorePoint_Explain">This policy setting allows you to create a system restore point on the computer on a daily basis prior to cleaning. 

    If you enable this setting, a system restore point will be created.

    If you disable or do not configure this setting, a system restore point will not be created.</string>
    <string id="Scan_DisableScanningMappedNetworkDrivesForFullScan">Run full scan on mapped network drives</string>
    <string id="Scan_DisableScanningMappedNetworkDrivesForFullScan_Explain">This policy setting allows you to configure scanning mapped network drives.

    If you enable this setting, mapped network drives will be scanned.

    If you disable or do not configure this setting, mapped network drives will not be scanned.</string>
    <string id="Scan_DisableScanningNetworkFiles">Scan network files</string>
    <string id="Scan_DisableScanningNetworkFiles_Explain">This policy setting allows you to configure scanning for network files. It is recommended that you do not enable this setting.

    If you enable this setting, network files will be scanned.

    If you disable or do not configure this setting, network files will not be scanned.</string>
    <string id="Scan_LocalSettingOverrideAvgCPULoadFactor">Configure local setting override for maximum percentage of CPU utilization</string>
    <string id="Scan_LocalSettingOverrideAvgCPULoadFactor_Explain">This policy setting configures a local override for the configuration of maximum percentage of CPU utilization during scan. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Scan_LocalSettingOverrideScanParameters">Configure local setting override for the scan type to use for a scheduled scan</string>
    <string id="Scan_LocalSettingOverrideScanParameters_Explain">This policy setting configures a local override for the configuration of  the scan type to use during a scheduled scan. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Scan_LocalSettingOverrideScheduleDay">Configure local setting override for schedule scan day</string>
    <string id="Scan_LocalSettingOverrideScheduleDay_Explain">This policy setting configures a local override for the configuration of scheduled scan day. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Scan_LocalSettingOverrideScheduleQuickScantime">Configure local setting override for scheduled quick scan time</string>
    <string id="Scan_LocalSettingOverrideScheduleQuickScantime_Explain">This policy setting configures a local override for the configuration of scheduled quick scan time. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Scan_LocalSettingOverrideScheduleTime">Configure local setting override for scheduled scan time</string>
    <string id="Scan_LocalSettingOverrideScheduleTime_Explain">This policy setting configures a local override for the configuration of scheduled scan time. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="Scan_PurgeItemsAfterDelay">Turn on removal of items from scan history folder</string>
    <string id="Scan_PurgeItemsAfterDelay_Explain">This policy setting defines the number of days items should be kept in the scan history folder before being permanently removed. The value represents the number of days to keep items in the folder. If set to zero, items will be kept forever and will not be automatically removed. By default, the value is set to 30 days.

    If you enable this setting, items will be removed from the scan history folder after the number of days specified.

    If you disable or do not configure this setting, items will be kept in the scan history folder for the default number of days.</string>
    <string id="Scan_QuickScanInterval">Specify the interval to run quick scans per day</string>
    <string id="Scan_QuickScanInterval_Explain">This policy setting allows you to specify an interval at which to perform a quick scan. The time value is represented as the number of hours between quick scans. Valid values range from 1 (every hour) to 24 (once per day). If set to zero, interval quick scans will not occur. By default, this setting is set to 0.

    If you enable this setting, a quick scan will run at the interval specified.

    If you disable or do not configure this setting, quick scan controlled by this config will not be run.</string>
    <string id="Scan_ScanOnlyIfIdle">Start the scheduled scan only when computer is on but not in use</string>
    <string id="Scan_ScanOnlyIfIdle_Explain">This policy setting allows you to configure scheduled scans to start only when your computer is on but not in use.

    If you enable or do not configure this setting, scheduled scans will only run when the computer is on but not in use.

    If you disable this setting, scheduled scans will run at the scheduled time.</string>
    <string id="Scan_ScanParameters">Specify the scan type to use for a scheduled scan</string>
    <string id="Scan_ScanParameters_Explain">This policy setting allows you to specify the scan type to use during a scheduled scan. Scan type options are:
    1 = Quick Scan (default)
    2 = Full Scan

    If you enable this setting, the scan type will be set to the specified value.

    If you disable or do not configure this setting, the default scan type will used.</string>
    <string id="Scan_ScanParameters_0">Quick scan</string>
    <string id="Scan_ScanParameters_1">Full system scan</string>
    <string id="Scan_ScheduleDay">Specify the day of the week to run a scheduled scan</string>
    <string id="Scan_ScheduleDay_Explain">This policy setting allows you to specify the day of the week on which to perform a scheduled scan. The scan can also be configured to run every day or to never run at all.

    This setting can be configured with the following ordinal number values:
    (0x0) Every Day
    (0x1) Sunday 
    (0x2) Monday
    (0x3) Tuesday
    (0x4) Wednesday
    (0x5) Thursday
    (0x6) Friday
    (0x7) Saturday
    (0x8) Never (default)

    If you enable this setting, a scheduled scan will run at the frequency specified.

    If you disable or do not configure this setting, a scheduled scan will run at a default frequency.</string>
    <string id="Scan_ScheduleDay_0">Never</string>
    <string id="Scan_ScheduleDay_1">Every Day</string>
    <string id="Scan_ScheduleDay_2">Sunday</string>
    <string id="Scan_ScheduleDay_3">Monday</string>
    <string id="Scan_ScheduleDay_4">Tuesday</string>
    <string id="Scan_ScheduleDay_5">Wednesday</string>
    <string id="Scan_ScheduleDay_6">Thursday</string>
    <string id="Scan_ScheduleDay_7">Friday</string>
    <string id="Scan_ScheduleDay_8">Saturday</string>
    <string id="Scan_ScheduleQuickScantime">Specify the time for a daily quick scan</string>
    <string id="Scan_ScheduleQuickScantime_Explain">This policy setting allows you to specify the time of day at which to perform a daily quick scan. The time value is represented as the number of minutes past midnight (00:00).  For example, 120 (0x78) is equivalent to 02:00 AM. By default, this setting is set to disabled. The schedule is based on local time on the computer where the scan is executing.

    If you enable this setting, a daily quick scan will run at the time of day specified.

    If you disable or do not configure this setting, daily quick scan controlled by this config will not be run.</string>
    <string id="Scan_ScheduleTime">Specify the time of day to run a scheduled scan</string>
    <string id="Scan_ScheduleTime_Explain">This policy setting allows you to specify the time of day at which to perform a scheduled scan. The time value is represented as the number of minutes past midnight (00:00).  For example, 120 (0x78) is equivalent to 02:00 AM. By default, this setting is set to  a time value of 2:00 AM. The schedule is based on local time on the computer where the scan is executing.

    If you enable this setting, a scheduled scan will run at the time of day specified.

    If you disable or do not configure this setting, a scheduled scan will run at a default time.</string>
    <string id="Scan_MissedScheduledScanCountBeforeCatchup">Define the number of days after which a catch-up scan is forced</string>
    <string id="Scan_MissedScheduledScanCountBeforeCatchup_Explain">
    This policy setting allows you to define the number of consecutive scheduled scans that can be missed after which a catch-up scan will be forced. By default, the value of this setting is 2 consecutive scheduled scans.

    If you enable this setting, a catch-up scan will occur after the specified number consecutive missed scheduled scans.

    If you disable or do not configure this setting, a catch-up scan will occur after the 2 consecutive missed scheduled scans.</string>
    <string id="Scan_LowCpuPriority">Configure low CPU priority for scheduled scans</string>
    <string id="Scan_LowCpuPriority_Explain">
        This policy setting allows you to enable or disable low CPU priority for scheduled scans.

        If you enable this setting, low CPU priority will be used during scheduled scans.

        If you disable or do not configure this setting, not changes will be made to CPU priority for scheduled scans.
    </string>
    <string id="SignatureUpdate_ASSignatureDue">Define the number of days before spyware security intelligence is considered out of date</string>
    <string id="SignatureUpdate_ASSignatureDue_Explain">This policy setting allows you to define the number of days that must pass before spyware security intelligence is considered out of date. If security intelligence is determined to be out of date, this state may trigger several additional actions, including falling back to an alternative update source or displaying a warning icon in the user interface. By default, this value is set to 7 days.

    If you enable this setting, spyware security intelligence will be considered out of date after the number of days specified have passed without an update.

    If you disable or do not configure this setting, spyware security intelligence will be considered out of date after the default number of days have passed without an update.</string>
    <string id="SignatureUpdate_AVSignatureDue">Define the number of days before virus security intelligence is considered out of date</string>
    <string id="SignatureUpdate_AVSignatureDue_Explain">This policy setting allows you to define the number of days that must pass before virus security intelligence is considered out of date. If security intelligence is determined to be out of date, this state may trigger several additional actions, including falling back to an alternative update source or displaying a warning icon in the user interface. By default, this value is set to 7 days.

    If you enable this setting, virus security intelligence will be considered out of date after the number of days specified have passed without an update.

    If you disable or do not configure this setting, virus security intelligence will be considered out of date after the default number of days have passed without an update.</string>
    <string id="SignatureUpdate_DefinitionUpdateFileSharesSources">Define file shares for downloading security intelligence updates</string>
    <string id="SignatureUpdate_DefinitionUpdateFileSharesSources_Explain">This policy setting allows you to configure UNC file share sources for downloading security intelligence updates. Sources will be contacted in the order specified. The value of this setting should be entered as a pipe-separated string enumerating the security intelligence update sources. For example: "{\\unc1 | \\unc2 }". The list is empty by default.

    If you enable this setting, the specified sources will be contacted for security intelligence updates. Once security intelligence updates have been successfully downloaded from one specified source, the remaining sources in the list will not be contacted.

    If you disable or do not configure this setting, the list will remain empty by default and no sources will be contacted.</string>
    <string id="SignatureUpdate_SharedSignaturesLocation">Define security intelligence location for VDI clients.</string>
    <string id="SignatureUpdate_SharedSignaturesLocation_Explain">This policy setting allows you to define the security intelligence location for VDI-configured computers. 

    If you disable or do not configure this setting, security intelligence will be referred from the default local source.</string>
    <string id="SignatureUpdate_DisableScanOnUpdate">Turn on scan after security intelligence update</string>
    <string id="SignatureUpdate_DisableScanOnUpdate_Explain">This policy setting allows you to configure the automatic scan which starts after a security intelligence update has occurred.

    If you enable or do not configure this setting, a scan will start following a security intelligence update.

    If you disable this setting, a scan will not start following a security intelligence update.</string>
    <string id="SignatureUpdate_DisableScheduledSignatureUpdateonBattery">Allow security intelligence updates when running on battery power</string>
    <string id="SignatureUpdate_DisableScheduledSignatureUpdateonBattery_Explain">This policy setting allows you to configure security intelligence updates when the computer is running on battery power.

    If you enable or do not configure this setting, security intelligence updates will occur as usual regardless of power state.

    If you disable this setting, security intelligence updates will be turned off while the computer is running on battery power.</string>
    <string id="SignatureUpdate_DisableUpdateOnStartupWithoutEngine">Initiate security intelligence update on startup</string>
    <string id="SignatureUpdate_DisableUpdateOnStartupWithoutEngine_Explain">This policy setting allows you to configure security intelligence updates on startup when there is no antimalware engine present.

    If you enable or do not configure this setting, security intelligence updates will be initiated on startup when there is no antimalware engine present.

    If you disable this setting, security intelligence updates will not be initiated on startup when there is no antimalware engine present.</string>
    <string id="SignatureUpdate_FallbackOrder">Define the order of sources for downloading security intelligence updates</string>
    <string id="SignatureUpdate_FallbackOrder_Explain">This policy setting allows you to define the order in which different security intelligence update sources should be contacted. The value of this setting should be entered as a pipe-separated string enumerating the security intelligence update sources in order. Possible values are: “InternalDefinitionUpdateServer”, “MicrosoftUpdateServer”, “MMPC”, and “FileShares”

    For example: { InternalDefinitionUpdateServer | MicrosoftUpdateServer | MMPC }

    If you enable this setting, security intelligence update sources will be contacted in the order specified. Once security intelligence updates have been successfully downloaded from one specified source, the remaining sources in the list will not be contacted.

    If you disable or do not configure this setting, security intelligence update sources will be contacted in a default order.</string>
    <string id="SignatureUpdate_ForceUpdateFromMU">Allow security intelligence updates from Microsoft Update</string>
    <string id="SignatureUpdate_ForceUpdateFromMU_Explain">This policy setting allows you to enable download of security intelligence updates from Microsoft Update even if the Automatic Updates default server is configured to another download source such as Windows Update.

    If you enable this setting, security intelligence updates will be downloaded from Microsoft Update.

    If you disable or do not configure this setting, security intelligence updates will be downloaded from the configured download source.</string>
    <string id="SignatureUpdate_RealtimeSignatureDelivery">Allow real-time security intelligence updates based on reports to Microsoft MAPS</string>
    <string id="SignatureUpdate_RealtimeSignatureDelivery_Explain">This policy setting allows you to enable real-time security intelligence updates in response to reports sent to Microsoft MAPS. If the service reports a file as an unknown and Microsoft MAPS finds that the latest security intelligence update has security intelligence for a threat involving that file, the service will receive all of the latest security intelligence for that threat immediately. You must have configured your computer to join Microsoft MAPS for this functionality to work.

    If you enable or do not configure this setting, real-time security intelligence updates will be enabled.

    If you disable this setting, real-time security intelligence updates will disabled.</string>
    <string id="SignatureUpdate_ScheduleDay">Specify the day of the week to check for security intelligence updates</string>
    <string id="SignatureUpdate_ScheduleDay_Explain">This policy setting allows you to specify the day of the week on which to check for security intelligence updates. The check can also be configured to run every day or to never run at all.

    This setting can be configured with the following ordinal number values:
    (0x0) Every Day (default)
    (0x1) Sunday 
    (0x2) Monday
    (0x3) Tuesday
    (0x4) Wednesday
    (0x5) Thursday
    (0x6) Friday
    (0x7) Saturday
    (0x8) Never

    If you enable this setting, the check for security intelligence updates will occur at the frequency specified.

    If you disable or do not configure this setting, the check for security intelligence updates will occur at a default frequency.</string>
    <string id="SignatureUpdate_ScheduleDay_0">Never</string>
    <string id="SignatureUpdate_ScheduleDay_1">Every Day</string>
    <string id="SignatureUpdate_ScheduleDay_2">Sunday</string>
    <string id="SignatureUpdate_ScheduleDay_3">Monday</string>
    <string id="SignatureUpdate_ScheduleDay_4">Tuesday</string>
    <string id="SignatureUpdate_ScheduleDay_5">Wednesday</string>
    <string id="SignatureUpdate_ScheduleDay_6">Thursday</string>
    <string id="SignatureUpdate_ScheduleDay_7">Friday</string>
    <string id="SignatureUpdate_ScheduleDay_8">Saturday</string>
    <string id="SignatureUpdate_ScheduleTime">Specify the time to check for security intelligence updates</string>
    <string id="SignatureUpdate_ScheduleTime_Explain">This policy setting allows you to specify the time of day at which to check for security intelligence updates. The time value is represented as the number of minutes past midnight (00:00).  For example, 120 (0x78) is equivalent to 02:00 AM. By default this setting is configured to check for security intelligence updates 15 minutes before the scheduled scan time. The schedule is based on local time on the computer where the check is occurring.

    If you enable this setting, the check for security intelligence updates will occur at the time of day specified.

    If you disable or do not configure this setting,  the check for security intelligence updates will occur at the default time.</string>
    <string id="SignatureUpdate_SignatureDisableNotification">Allow notifications to disable security intelligence based reports to Microsoft MAPS</string>
    <string id="SignatureUpdate_SignatureDisableNotification_Explain">This policy setting allows you to configure the antimalware service to receive notifications to disable individual security intelligence in response to reports it sends to Microsoft MAPS. Microsoft MAPS uses these notifications to disable security intelligence that are causing false positive reports. You must have configured your computer to join Microsoft MAPS for this functionality to work.

    If you enable this setting or do not configure, the antimalware service will receive notifications to disable security intelligence.

    If you disable this setting, the antimalware service will not receive notifications to disable security intelligence.</string>
    <string id="SignatureUpdate_SignatureUpdateCatchupInterval">Define the number of days after which a catch-up security intelligence update is required</string>
    <string id="SignatureUpdate_SignatureUpdateCatchupInterval_Explain">This policy setting allows you to define the number of days after which a catch-up security intelligence update will be required. By default, the value of this setting is 1 day.

    If you enable this setting, a catch-up security intelligence update will occur after the specified number of days.

    If you disable or do not configure this setting, a catch-up security intelligence update will be required after the default number of days.</string>
    <string id="SignatureUpdate_ExpiryNotificationIntervalDays">Specify the interval for expiry notification</string>
    <string id="SignatureUpdate_ExpiryNotificationIntervalDays_Explain">
    This policy setting allows you to specify an interval(in days) for expiry notification.
    If a signature expiry or platform expiry is impending, this value tells how soon AM UI will notify customers.

    Value should be greater than zero for the policy to be active.
    </string>
    <string id="SignatureUpdate_SignatureUpdateInterval">Specify the interval to check for security intelligence updates</string>
    <string id="SignatureUpdate_SignatureUpdateInterval_Explain">This policy setting allows you to specify an interval at which to check for security intelligence updates. The time value is represented as the number of hours between update checks. Valid values range from 1 (every hour) to 24 (once per day).

    If you enable this setting, checks for security intelligence updates will occur at the interval specified.

    If you disable or do not configure this setting, checks for security intelligence updates will occur at the default interval.</string>
    <string id="SignatureUpdate_UpdateOnStartup">Check for the latest virus and spyware security intelligence on startup</string>
    <string id="SignatureUpdate_UpdateOnStartup_Explain">This policy setting allows you to manage whether a check for new virus and spyware security intelligence will occur immediately after service startup.

    If you enable this setting, a check for new security intelligence will occur after service startup.

    If you disable this setting or do not configure this setting, a check for new security intelligence will not occur after service startup.</string>
    <string id="DisableBlockAtFirstSeen">Configure the 'Block at First Sight' feature</string>
    <string id="DisableBlockAtFirstSeen_Explain">This feature ensures the device checks in real time with the Microsoft Active Protection Service (MAPS) before allowing certain content to be run or accessed. If this feature is disabled, the check will not occur, which will lower the protection state of the device.
    Enabled – The Block at First Sight setting is turned on.
    Disabled – The Block at First Sight setting is turned off.
    
    This feature requires these Group Policy settings to be set as follows:
    MAPS -> The “Join Microsoft MAPS” must be enabled or the “Block at First Sight” feature will not function.
    MAPS -> The “Send file samples when further analysis is required” should be set to 1 (Send safe samples) or 3 (Send all samples). Setting to 0 (Always Prompt) will lower the protection state of the device.  Setting to 2 (Never send) means the “Block at First Sight” feature will not function.
    Real-time Protection -> The “Scan all downloaded files and attachments” policy must be enabled or the “Block at First Sight” feature will not function.
    Real-time Protection -> Do not enable the “Turn off real-time protection” policy or the “Block at First Sight” feature will not function.</string>
    <string id="Spynet_LocalSettingOverrideSpynetReporting">Configure local setting override for reporting to Microsoft MAPS</string>
    <string id="Spynet_LocalSettingOverrideSpynetReporting_Explain">This policy setting configures a local override for the configuration to join Microsoft MAPS. This setting can only be set by Group Policy.

    If you enable this setting, the local preference setting will take priority over Group Policy.

    If you disable or do not configure this setting, Group Policy will take priority over the local preference setting.</string>
    <string id="SubmitSamplesConsent">Send file samples when further analysis is required</string>
    <string id="SubmitSamplesConsent_Explain">
        This policy setting configures behaviour of samples submission when opt-in for MAPS telemetry is set.

        Possible options are:
        (0x0) Always prompt
        (0x1) Send safe samples automatically
        (0x2) Never send
        (0x3) Send all samples automatically
    </string>

    <string id="SubmitSamplesConsent_Always_Prompt">Always prompt</string>
    <string id="SubmitSamplesConsent_Send_Safe">Send safe samples</string>
    <string id="SubmitSamplesConsent_Never_Send">Never send</string>
    <string id="SubmitSamplesConsent_Send_All">Send all samples</string>

    <string id="SpynetReporting">Join Microsoft MAPS</string>
    <string id="SpynetReporting_Explain">This policy setting allows you to join Microsoft MAPS. Microsoft MAPS is the online community that helps you choose how to respond to potential threats. The community also helps stop the spread of new malicious software infections.

    You can choose to send basic or additional information about detected software. Additional information helps Microsoft create new security intelligence and help it to protect your computer. This information can include things like location of detected items on your computer if harmful software was removed. The information will be automatically collected and sent. In some instances, personal information might unintentionally be sent to Microsoft. However, Microsoft will not use this information to identify you or contact you.

    Possible options are:
    (0x0) Disabled (default)
    (0x1) Basic membership
    (0x2) Advanced membership

    Basic membership will send basic information to Microsoft about software that has been detected, including where the software came from, the actions that you apply or that are applied automatically, and whether the actions were successful.

    Advanced membership, in addition to basic information, will send more information to Microsoft about malicious software, spyware, and potentially unwanted software, including the location of the software, file names, how the software operates, and how it has impacted your computer.

    If you enable this setting, you will join Microsoft MAPS with the membership specified.

    If you disable or do not configure this setting, you will not join Microsoft MAPS.
  
    In Windows 10, Basic membership is no longer available, so setting the value to 1 or 2 enrolls the device into Advanced membership.</string>
    <string id="SpynetReporting_Disabled">Disabled</string>
    <string id="SpynetReporting_Basic">Basic MAPS</string>
    <string id="SpynetReporting_Advanced">Advanced MAPS</string>
    <string id="Threats_ThreatIdDefaultAction">Specify threats upon which default action should not be taken when detected</string>
    <string id="Threats_ThreatIdDefaultAction_Explain">This policy setting customize which remediation action will be taken for each listed Threat ID when it is detected during a scan. Threats should be added under the Options for this setting. Each entry must be listed as a name value pair. The name defines a valid Threat ID, while the value contains the action ID for the remediation action that should be taken.

    Valid remediation action values are:
    2 = Quarantine
    3 = Remove
    6 = Ignore</string>
    <string id="Threats_ThreatSeverityDefaultAction">Specify threat alert levels at which default action should not be taken when detected</string>
    <string id="Threats_ThreatSeverityDefaultAction_Explain">This policy setting allows you to customize which automatic remediation action will be taken for each threat alert level.Threat alert levels should be added under the Options for this setting. Each entry must be listed as a name value pair. The name defines a threat alert level. The value contains the action ID for the remediation action that should be taken.

    Valid threat alert levels are:
    1 = Low
    2 =  Medium
    4 = High
    5 = Severe

    Valid remediation action values are:
    2 = Quarantine
    3 = Remove
    6 = Ignore</string>
    <string id="UX_Configuration_UILockdown">Enable headless UI mode</string>
    <string id="UX_Configuration_UILockdown_Explain">
        This policy setting allows you to configure whether or not to display AM UI to the users.
        If you enable this setting AM UI won't be available to users.
    </string>
    <string id="UX_Configuration_SuppressRebootNotification">Suppresses reboot notifications</string>
    <string id="UX_Configuration_SuppressRebootNotification_Explain">
      This policy setting allows user to supress reboot notifications in UI only mode (for cases where UI can't be in lockdown mode).

      If you enable this setting AM UI won't show reboot notifications.
    </string>
    <string id="UX_Configuration_Notification_Suppress">Suppress all notifications</string>
    <string id="UX_Configuration_Notification_Suppress_Explain">Use this policy setting to specify if you want Microsoft Defender Antivirus notifications to display on clients.
      If you disable or do not configure this setting, Microsoft Defender Antivirus notifications will display on clients.

      If you enable this setting, Microsoft Defender Antivirus notifications will not display on clients.
    </string>
    <string id="MpCloudBlockLevel">Select cloud protection level</string>
    <string id="MpCloudBlockLevel_Explain">
      This policy setting determines how aggressive Microsoft Defender Antivirus will be in blocking and scanning suspicious files.

      If this setting is on, Microsoft Defender Antivirus will be more aggressive when identifying suspicious files to block and scan; otherwise, it will be less aggressive and therefore block and scan with less frequency. 
      
      For more information about specific values that are supported, see the Microsoft Defender Antivirus documentation site.

      Note: This feature requires the "Join Microsoft MAPS" setting enabled in order to function.

      Possible options are:
      (0x0) Default Microsoft Defender Antivirus blocking level
      (0x1) Moderate Microsoft Defender Antivirus blocking level, delivers verdict only for high confidence detections
      (0x2) High blocking level - aggressively block unknowns while optimizing client performance (greater chance of false positives)
      (0x4) High+ blocking level – aggressively block unknowns and apply additional protection measures (may impact  client performance)
      (0x6) Zero tolerance blocking level – block all unknown executables
    </string>
    <string id="MpCloudBlockLevel_Default_Level">Default blocking level</string>
    <string id="MpCloudBlockLevel_Moderate_Level">Moderate blocking level</string>
    <string id="MpCloudBlockLevel_High_Level">High blocking level</string>
    <string id="MpCloudBlockLevel_High_Plus_Level">High+ blocking level</string>
    <string id="MpCloudBlockLevel_Zero_Tolerance_Level">Zero tolerance blocking level</string>
    <string id="MpBafsExtendedTimeout">Configure extended cloud check</string>
    <string id="MpBafsExtendedTimeout_Explain">
      This feature allows Microsoft Defender Antivirus to block a suspicious file for up to 60 seconds, and scan it in the cloud to make sure it's safe.
      
      The typical cloud check timeout is 10 seconds. To enable the extended cloud check feature, specify the extended time in seconds, up to an additional 50 seconds.

      For example, if the desired timeout is 60 seconds, specify 50 seconds in this setting, which will enable the extended cloud check feature, and will raise the total time to 60 seconds.

      Note: This feature depends on three other MAPS settings - "Configure the 'Block at First Sight' feature; "Join Microsoft MAPS"; "Send file samples when further analysis is required" all need to be enabled.
    </string>
    <string id="MpEngine_EnableFileHashComputation">Enable file hash computation feature</string>
    <string id="MpEngine_EnableFileHashComputation_Explain">
        Enable or disable file hash computation feature.

        Enabled:
        When this feature is enabled Microsoft Defender will compute hash value for files it scans.

        Disabled:
        File hash value is not computed
        
        Not configured:
        Same as Disabled.
    </string>
    <string id="ExploitGuard_EnableNetworkProtection">Prevent users and apps from accessing dangerous websites</string>
    <string id="ExploitGuard_EnableNetworkProtection_Explain">
    Enable or disable Microsoft Defender Exploit Guard network protection to prevent employees from using any application to access dangerous domains that may host phishing scams, exploit-hosting sites, and other malicious content on the Internet.

    Enabled:
    Specify the mode in the Options section:
    -Block: Users and applications will not be able to access dangerous domains
    -Audit Mode: Users and applications can connect to dangerous domains, however if this feature would have blocked access if it were set to Block, then a record of the event will be in the event logs.

    Disabled:
    Users and applications will not be blocked from connecting to dangerous domains.

    Not configured:
    Same as Disabled.
    </string>
    <string id="ExploitGuard_ASR_ASROnlyExclusions">Exclude files and paths from Attack Surface Reduction Rules</string>
    <string id="ExploitGuard_ASR_ASROnlyExclusions_Explain">
    Exclude files and paths from Attack Surface Reduction (ASR) rules.

    Enabled:
    Specify the folders or files and resources that should be excluded from ASR rules in the Options section.
    Enter each rule on a new line as a name-value pair:
    - Name column: Enter a folder path or a fully qualified resource name. For example, ""C:\Windows"" will exclude all files in that directory. ""C:\Windows\App.exe"" will exclude only that specific file in that specific folder
    - Value column: Enter ""0"" for each item

    Disabled:
    No exclusions will be applied to the ASR rules.

    Not configured:
    Same as Disabled.

    You can configure ASR rules in the Configure Attack Surface Reduction rules GP setting.
    </string>
    <string id="ExploitGuard_ASR_Rules">Configure Attack Surface Reduction rules</string>
    <string id="ExploitGuard_ASR_Rules_Explain">
    Set the state for each Attack Surface Reduction (ASR) rule.

    After enabling this setting, you can set each rule to the following in the Options section:
    - Block: the rule will be applied
    - Audit Mode: if the rule would normally cause an event, then it will be recorded (although the rule will not actually be applied)
    - Off: the rule will not be applied
    - Not Configured: the rule is enabled with default values
    - Warn: the rule will be applied and the end-user will have the option to bypass the block

    Unless the ASR rule is disabled, a subsample of audit events are collected for ASR rules will the value of not configured.

    Enabled:
    Specify the state for each ASR rule under the Options section for this setting.
    Enter each rule on a new line as a name-value pair:
    - Name column: Enter a valid ASR rule ID
    - Value column: Enter the status ID that relates to state you want to specify for the associated rule

    The following status IDs are permitted under the value column:
    - 1 (Block)
    - 0 (Off)
    - 2 (Audit)
    - 5 (Not Configured)
    - 6 (Warn)

    
    Example:
    xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx            0
    xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx            1
    xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx            2

    Disabled:
    No ASR rules will be configured.

    Not configured:
    Same as Disabled.

    You can exclude folders or files in the ""Exclude files and paths from Attack Surface Reduction Rules"" GP setting.
    </string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess">Configure Controlled folder access</string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess_Explain">
        Enable or disable controlled folder access for untrusted applications. You can choose to block, audit, or allow attempts by untrusted apps to:
        - Modify or delete files in protected folders, such as the Documents folder
        - Write to disk sectors

        You can also choose to only block or audit writes to disk sectors while still allowing the modification or deletion of files in protected folders.

        Microsoft Defender Antivirus automatically determines which applications can be trusted. You can add additional trusted applications in the Configure allowed applications GP setting.
        Default system folders are automatically protected, but you can add folders in the Configure protected folders GP setting.

        Block:
        The following will be blocked:
        - Attempts by untrusted apps to modify or delete files in protected folders
        - Attempts by untrusted apps to write to disk sectors
        The Windows event log will record these blocks under Applications and Services Logs > Microsoft > Windows > Windows Defender > Operational > ID 1123.


        Disabled:
        The following will not be blocked and will be allowed to run:
        - Attempts by untrusted apps to modify or delete files in protected folders
        - Attempts by untrusted apps to write to disk sectors
        These attempts will not be recorded in the Windows event log.


        Audit Mode:
        The following will not be blocked and will be allowed to run:
        - Attempts by untrusted apps to modify or delete files in protected folders
        - Attempts by untrusted apps to write to disk sectors
        The Windows event log will record these attempts under Applications and Services Logs > Microsoft > Windows > Windows Defender > Operational > ID 1124.


        Block disk modification only:
        The following will be blocked:
        - Attempts by untrusted apps to write to disk sectors
        The Windows event log will record these attempts under Applications and Services Logs > Microsoft > Windows > Windows Defender > Operational > ID 1123.

        The following will not be blocked and will be allowed to run:
        - Attempts by untrusted apps to modify or delete files in protected folders
        These attempts will not be recorded in the Windows event log.


        Audit disk modification only:
        The following will not be blocked and will be allowed to run:
        - Attempts by untrusted apps to write to disk sectors
        - Attempts by untrusted apps to modify or delete files in protected folders
        Only attempts to write to protected disk sectors will be recorded in the Windows event log (under Applications and Services Logs > Microsoft > Windows > Windows Defender > Operational > ID 1124).
        Attempts to modify or delete files in protected folders will not be recorded.

        Not configured:
        Same as Disabled.
    </string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess_Disable">Disable (Default)</string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess_Block">Block</string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess_Audit">Audit Mode</string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess_BlockDiskModifications">Block disk modification only</string>
    <string id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess_AuditDiskModifications">Audit disk modification only</string>
    <string id="ExploitGuard_ControlledFolderAccess_AllowedApplications">Configure allowed applications</string>
    <string id="ExploitGuard_ControlledFolderAccess_AllowedApplications_Explain">
    Add additional applications that should be considered "trusted" by controlled folder access.

    These applications are allowed to modify or delete files in controlled folder access folders.

    Microsoft Defender Antivirus automatically determines which applications should be trusted. You can configure this setting to add additional applications.

    Enabled: 
    Specify additional allowed applications in the Options section..

    Disabled:
    No additional applications will be added to the trusted list.

    Not configured:
    Same as Disabled.

    You can enable controlled folder access in the Configure controlled folder access GP setting.

    Default system folders are automatically guarded, but you can add folders in the configure protected folders GP setting.
    </string>
    <string id="ExploitGuard_ControlledFolderAccess_ProtectedFolders">Configure protected folders</string>
    <string id="ExploitGuard_ControlledFolderAccess_ProtectedFolders_Explain">
    Specify additional folders that should be guarded by the Controlled folder access feature.

    Files in these folders cannot be modified or deleted by untrusted applications.

    Default system folders are automatically protected. You can configure this setting to add additional folders. 
    The list of default system folders that are protected is shown in Windows Security.

    Enabled:
    Specify additional folders that should be protected in the Options section.

    Disabled:
    No additional folders will be protected.

    Not configured:
    Same as Disabled.

    You can enable controlled folder access in the Configure controlled folder access GP setting.

    Microsoft Defender Antivirus automatically determines which applications can be trusted. You can add additional trusted applications in the Configure allowed applications GP setting.
    </string>
    <string id="DeviceControl_PolicyGroups">Define device control policy groups</string>
    <string id="DeviceControl_PolicyGroups_Explain">
        Please follow the device control policy groups xml schema to fill out the policy groups data. 
        Alternatively you could use a file path containing the XML groups data.
    </string>
    <string id="DeviceControl_PolicyRules">Define device control policy rules</string>
    <string id="DeviceControl_PolicyRules_Explain">
        Please follow the device control policy rules xml schema to fill out the policy rules data.
        Alternatively you could use a file path containing the XML rules data.
    </string>
    <string id="Root_PlatformUpdateChannel">Select the channel for Microsoft Defender monthly platform updates</string>
    <string id="Root_PlatformUpdateChannel_Explain">Enable this policy to specify when devices receive Microsoft Defender platform updates during the monthly gradual rollout.​

        Beta Channel: Devices set to this channel will be the first to receive new updates. Select Beta Channel to participate in identifying and reporting issues to Microsoft. Devices in the Windows Insider Program are subscribed to this channel by default. For use in (manual) test environments only and a limited number of devices.
        Current Channel (Preview): Devices set to this channel will be offered updates earliest during the monthly gradual release cycle. Suggested for pre-production/validation environments.
        Current Channel (Staged): Devices will be offered updates after the monthly gradual release cycle. Suggested to apply to a small, representative part of your production population (~10%).
        Current Channel (Broad): Devices will be offered updates only after the gradual release cycle completes. Suggested to apply to a broad set of devices in your production population (~10-100%).
        Critical - Time delay: Devices will be offered updates with a 48-hour delay. Suggested for critical environments only.

        If you disable or do not configure this policy, the device will stay up to date automatically during the gradual release cycle. Suitable for most devices.
    </string>
    <string id="Root_EngineUpdateChannel">Select the channel for Microsoft Defender monthly engine updates</string>
    <string id="Root_EngineUpdateChannel_Explain">Enable this policy to specify when devices receive Microsoft Defender engine updates during the monthly gradual rollout.​

        Beta Channel: Devices set to this channel will be the first to receive new updates. Select Beta Channel to participate in identifying and reporting issues to Microsoft. Devices in the Windows Insider Program are subscribed to this channel by default. For use in (manual) test environments only and a limited number of devices.
        Current Channel (Preview): Devices set to this channel will be offered updates earliest during the monthly gradual release cycle. Suggested for pre-production/validation environments.
        Current Channel (Staged): Devices will be offered updates after the monthly gradual release cycle. Suggested to apply to a small, representative part of your production population (~10%).
        Current Channel (Broad): Devices will be offered updates only after the gradual release cycle completes. Suggested to apply to a broad set of devices in your production population (~10-100%).
        Critical - Time delay: Devices will be offered updates with a 48-hour delay. Suggested for critical environments only.

        If you disable or do not configure this policy, the device will stay up to date automatically during the gradual release cycle. Suitable for most devices.
    </string>
    <string id="Root_SecurityIntelligenceUpdateChannel">Select the channel for Microsoft Defender daily security intelligence updates</string>
    <string id="Root_SecurityIntelligenceUpdateChannel_Explain">Enable this policy to specify when devices receive Microsoft Defender security intelligence updates during the daily gradual rollout.

        Current Channel (Staged): Devices will be offered updates after the release cycle. Suggested to apply to a small, representative part of production population (~10%).
        Current Channel (Broad): Devices will be offered updates only after the gradual release cycle completes. Suggested to apply to a broad set of devices in your production population (~10-100%).
        Critical - Time delay: Devices will be offered updates with a 48-hour delay. Suggested for critical environments only.

        If you disable or do not configure this policy, the device will stay up to date automatically during the daily release cycle. Suitable for most devices.
    </string>
    <string id="Root_UpdateChannel_Dropdown_Beta">Beta Channel</string>
    <string id="Root_UpdateChannel_Dropdown_Preview">Current Channel (Preview)</string>
    <string id="Root_UpdateChannel_Dropdown_Staged">Current Channel (Staged)</string>
    <string id="Root_UpdateChannel_Dropdown_Broad">Current Channel (Broad)</string>
    <string id="Root_UpdateChannel_Dropdown_Delayed">Critical - Time delay</string>
    <string id="MpEngine_DisableGradualRelease">Disable gradual rollout of Microsoft Defender updates.</string>
    <string id="MpEngine_DisableGradualRelease_Explain">Enable this policy to disable gradual rollout of Defender updates.

        Current Channel (Broad): Devices set to this channel will be offered updates last during the gradual release cycle. Best for datacenter machines that only receive limited updates.

        Note: This setting applies to both monthly as well as daily Defender updates and will override any previously configured channel selections for platform and engine updates.

        If you disable or do not configure this policy, the device will remain in Current Channel (Default) unless specified otherwise in specific channels for platform and engine updates. Stay up to date automatically during the gradual release cycle. Suitable for most devices.</string>
    <string id="DeviceControl_DefaultEnforcement">Select Device Control Default Enforcement Policy</string>
    <string id="DeviceControl_DefaultEnforcement_Explain">
        Default Allow: Choosing this default enforcement, will Allow any operations to occur on the attached devices if no policy rules are found to match.
        Default Deny: Choosing this default enforcement, will Deny any operations to occur on the attached devices if no policy rules are found to match.

        Default Enforcement will establish what decision should be made during the Device Control access checks when none of the policy rules match.
    </string>
    <string id="DeviceControl_DefaultEnforcement_DefaultAllow">Default Allow</string>
    <string id="DeviceControl_DefaultEnforcement_DefaultDeny">Default Deny</string>
    <string id="DeviceControl_DataDuplicationRemoteLocation">Define Device Control evidence data remote location</string>
    <string id="DeviceControl_DataDuplicationRemoteLocation_Explain">
        Define evidence file remote location, where Device Control service will move evidence data captured.
    </string>
	<string id="DeviceControl_DataDuplicationLocalRetentionPeriod">Set the retention period for files in the local device control cache</string>
    <string id="DeviceControl_DataDuplicationLocalRetentionPeriod_Explain">
        This policy setting determines how long device control retains files for evidence in its local cache on the device. Device control keeps a file in its local cache only if it is unable to upload the file to a designated network share or Azure storage. 

        By default, device control retains files in its local cache for 60 days.
    </string>
	<string id="DeviceControl_SecuredDevicesConfiguration">Turn on device control for specific device types</string>
    <string id="DeviceControl_SecuredDevicesConfiguration_Explain">
        This policy setting controls which device types, identified by their PrimaryIds, will have device control protection turned on. If you enable this setting for certain device types, device control will regulate access to those devices based on the corresponding custom policy. Device control will be turned off for all other types of supported devices, even if custom protection policies are configured for those devices.
 
        This setting currently supports these device types: RemovableMediaDevices, CdRomDevices, WpdDevices, and PrinterDevices. 
 
        If you enable this policy setting but do not specify any PrimaryIds, device control will be turned off across all supported device types.
 
        If you disable or don’t configure this policy setting, device control will be enforced on all supported devicesbased on their corresponding custom policies.
    </string>
    <string id="Features_DeviceControlEnabled">Device Control</string>
    <string id="DeviceControl_DeviceControlEnabled_Explain">
        Enable or Disable Defender Device Control on this machine.
        Note: You must be enrolled as E3 or E5 in order for Device Control to be enabled.
    </string>
    <string id="Features_TDTFeatureEnabled">Intel TDT Integration Level</string>
    <string id="Features_TDTFeatureEnabled_Explain">This policy setting configures the Intel TDT integration level for Intel TDT-capable devices.

        If you do not configure this setting, the default value will be applied. The default value is controlled by Microsoft security intelligence updates. Microsoft will enable Intel TDT if there is a known threat.

        If you configure this setting to disabled, Intel TDT integration will turn off.</string>
    <string id="Features_PassiveRemediation">Enable EDR in block mode</string>
    <string id="Features_PassiveRemediation_Explain">This policy setting enables or disables EDR in block mode (also known as "passive remediation"). EDR in block mode is recommended for devices running Microsoft Defender Antivirus in passive mode. Available with platform release: 4.18.2202.X

        The data type is integer

        Supported values:

        1: Turn EDR in block mode on
        0: Turn EDR in block mode off</string>
    </stringTable>
    <presentationTable>
    <presentation id="ProxyBypass">
    <textBox refId="ProxyBypass">
        <label>Define addresses to bypass proxy server</label>
    </textBox>
    </presentation>
    <presentation id="ProxyPacUrl">
      <textBox refId="ProxyPacUrl">
        <label>Define proxy auto-config (.pac) for connecting to the network</label>
      </textBox>
    </presentation>
    <presentation id="ProxyServer">
    <textBox refId="ProxyServer">
        <label>Define proxy server for connecting to the network</label>
    </textBox>
    </presentation>
    <presentation id="SupportLogLocation">
    <textBox refId="SupportLogLocation">
        <label>Define the directory path to copy support log files</label>
    </textBox>
    </presentation>
    <presentation id="Exclusions_Extensions">
    <listBox refId="Exclusions_ExtensionsList">Extension Exclusions</listBox>
    </presentation>
    <presentation id="Exclusions_Paths">
    <listBox refId="Exclusions_PathsList">Path Exclusions</listBox>
    </presentation>
    <presentation id="Exclusions_Processes">
    <listBox refId="Exclusions_ProcessesList">Process Exclusions</listBox>
    </presentation>
    <presentation id="Exclusions_IpAddresses">
    <listBox refId="Exclusions_IpAddressesList">IP Address Exclusions</listBox>
    </presentation>
    <presentation id="Nis_Consumers_IPS_sku_differentiation_Signature_Set_Guid">
    <listBox refId="Nis_Consumers_IPS_sku_differentiation_Signature_Set_GuidList">Specify additional definition sets for network traffic inspection</listBox>
    </presentation>
    <presentation id="Quarantine_PurgeItemsAfterDelay">
    <decimalTextBox refId="Quarantine_PurgeItemsAfterDelay" defaultValue="0">Configure removal of items from Quarantine folder</decimalTextBox>
    </presentation>
    <presentation id="RealtimeProtection_IOAVMaxSize">
    <decimalTextBox refId="RealtimeProtection_IOAVMaxSize" defaultValue="20480">Define the maximum size of downloaded files and attachments to be scanned</decimalTextBox>
    </presentation>
    <presentation id="RealtimeProtection_RealtimeScanDirection">
    <dropdownList refId="RealtimeProtection_RealtimeScanDirection" noSort="true" defaultItem="0">Configure monitoring for incoming and outgoing file and program activity</dropdownList>
    </presentation>
    <presentation id="Remediation_Scan_ScheduleDay">
    <dropdownList refId="Remediation_Scan_ScheduleDay" noSort="true" defaultItem="0">Specify the day of the week to run a scheduled full scan to complete remediation</dropdownList>
    </presentation>
    <presentation id="Remediation_Scan_ScheduleTime">
    <decimalTextBox refId="Remediation_Scan_ScheduleTime" defaultValue="120">Specify the time of day to run a scheduled full scan to complete remediation</decimalTextBox>
    </presentation>
    <presentation id="Scan_MissedScheduledScanCountBeforeCatchup">
    <decimalTextBox refId="Scan_MissedScheduledScanCountBeforeCatchup" defaultValue="2">Define the number of scheduled scans that can be missed after which a catch-up scan is forced</decimalTextBox>
    </presentation>
    <presentation id="Reporting_AdditionalActionTimeout">
    <decimalTextBox refId="Reporting_AdditionalActionTimeout" defaultValue="10080">Configure time out for detections requiring additional action</decimalTextBox>
    </presentation>
    <presentation id="Reporting_CriticalFailureTimeout">
    <decimalTextBox refId="Reporting_CriticalFailureTimeout" defaultValue="10080">Configure time out for detections in critically failed state</decimalTextBox>
    </presentation>
    <presentation id="Reporting_NonCriticalTimeout">
    <decimalTextBox refId="Reporting_NonCriticalTimeout" defaultValue="1440">Configure time out for detections in non-critical failed state</decimalTextBox>
    </presentation>
    <presentation id="Reporting_RecentlyCleanedTimeout">
    <decimalTextBox refId="Reporting_RecentlyCleanedTimeout" defaultValue="1440">Configure time out for detections in recently remediated state</decimalTextBox>
    </presentation>
    <presentation id="Reporting_WppTracingComponents">
    <decimalTextBox refId="Reporting_WppTracingComponents" defaultValue="4294967295">Configure Windows software trace preprocessor components</decimalTextBox>
    </presentation>
    <presentation id="Reporting_WppTracingLevel">
    <decimalTextBox refId="Reporting_WppTracingLevel" defaultValue="0">Configure WPP tracing level</decimalTextBox>
    </presentation>
    <presentation id="Reporting_ServiceHealthReportInterval">
    <decimalTextBox refId="Reporting_ServiceHealthReportInterval" defaultValue="60">Configure time interval for service health reports</decimalTextBox>
    </presentation>
    <presentation id="Scan_ArchiveMaxDepth">
    <decimalTextBox refId="Scan_ArchiveMaxDepth" defaultValue="0">Specify the maximum depth to scan archive files</decimalTextBox>
    </presentation>
    <presentation id="Scan_ArchiveMaxSize">
    <decimalTextBox refId="Scan_ArchiveMaxSize" defaultValue="0">Specify the maximum size of archive files to be scanned</decimalTextBox>
    </presentation>
    <presentation id="Scan_AvgCPULoadFactor">
    <decimalTextBox refId="Scan_AvgCPULoadFactor" defaultValue="50">Specify the maximum percentage of CPU utilization during a scan</decimalTextBox>
    </presentation>
    <presentation id="Scan_PurgeItemsAfterDelay">
    <decimalTextBox refId="Scan_PurgeItemsAfterDelay" defaultValue="30">Turn on removal of items from scan history folder</decimalTextBox>
    </presentation>
    <presentation id="Scan_QuickScanInterval">
    <decimalTextBox refId="Scan_QuickScanInterval" defaultValue="0">Specify the interval to run quick scans per day</decimalTextBox>
    </presentation>
    <presentation id="Scan_ScanParameters">
    <dropdownList refId="Scan_ScanParameters" noSort="true" defaultItem="0">Specify the scan type to use for a scheduled scan</dropdownList>
    </presentation>
    <presentation id="Scan_ScheduleDay">
    <dropdownList refId="Scan_ScheduleDay" noSort="true" defaultItem="0">Specify the day of the week to run a scheduled scan</dropdownList>
    </presentation>
    <presentation id="Scan_ScheduleQuickScantime">
    <decimalTextBox refId="Scan_ScheduleQuickScantime" defaultValue="120">Specify the time for a daily quick scan</decimalTextBox>
    </presentation>
    <presentation id="Scan_ScheduleTime">
    <decimalTextBox refId="Scan_ScheduleTime" defaultValue="120">Specify the time of day to run a scheduled scan</decimalTextBox>
    </presentation>
    <presentation id="SignatureUpdate_ASSignatureDue">
    <decimalTextBox refId="SignatureUpdate_ASSignatureDue" defaultValue="7">Define the number of days before spyware security intelligence is considered out of date</decimalTextBox>
    </presentation>
    <presentation id="SignatureUpdate_AVSignatureDue">
    <decimalTextBox refId="SignatureUpdate_AVSignatureDue" defaultValue="7">Define the number of days before virus security intelligence is considered out of date</decimalTextBox>
    </presentation>
    <presentation id="SignatureUpdate_DefinitionUpdateFileSharesSources">
    <textBox refId="SignatureUpdate_DefinitionUpdateFileSharesSources">
        <label>Define file shares for downloading security intelligence updates</label>
    </textBox>
    </presentation>
    <presentation id="SignatureUpdate_SharedSignaturesLocation">
    <textBox refId="SignatureUpdate_SharedSignaturesLocation">
        <label>Define file share for downloading security intelligence updates in virtual environments</label>
    </textBox>
    </presentation>
    <presentation id="SignatureUpdate_FallbackOrder">
    <textBox refId="SignatureUpdate_FallbackOrder">
        <label>Define the order of sources for downloading security intelligence updates</label>
    </textBox>
    </presentation>
    <presentation id="SignatureUpdate_ScheduleDay">
    <dropdownList refId="SignatureUpdate_ScheduleDay" noSort="true" defaultItem="0">Specify the day of the week to check for security intelligence updates</dropdownList>
    </presentation>
    <presentation id="SignatureUpdate_ScheduleTime">
    <decimalTextBox refId="SignatureUpdate_ScheduleTime">Specify the time to check for security intelligence updates</decimalTextBox>
    </presentation>
    <presentation id="SignatureUpdate_SignatureUpdateCatchupInterval">
    <decimalTextBox refId="SignatureUpdate_SignatureUpdateCatchupInterval" defaultValue="1">Define the number of days after which a catch-up security intelligence update is required</decimalTextBox>
    </presentation>
    <presentation id="SignatureUpdate_SignatureUpdateInterval">
    <decimalTextBox refId="SignatureUpdate_SignatureUpdateInterval">Specify the interval to check for security intelligence updates</decimalTextBox>
    </presentation>
    <presentation id="SpynetReporting">
    <dropdownList refId="SpynetReporting" noSort="true" defaultItem="0">Join Microsoft MAPS</dropdownList>
    </presentation>
    <presentation id="SubmitSamplesConsent">
    <dropdownList refId="SubmitSamplesConsent" noSort="true" defaultItem="1">Send file samples when further analysis is required</dropdownList>
    </presentation>
    <presentation id="Threats_ThreatIdDefaultAction">
    <listBox refId="Threats_ThreatIdDefaultActionList">Specify threats upon which default action should not be taken when detected</listBox>
    </presentation>
    <presentation id="Threats_ThreatSeverityDefaultAction">
    <listBox refId="Threats_ThreatSeverityDefaultActionList">Specify threat alert levels at which default action should not be taken when detected</listBox>
    </presentation>
    <presentation id="SignatureUpdate_ExpiryNotificationIntervalDays">
        <decimalTextBox refId="SignatureUpdate_ExpiryNotificationIntervalDays">Specify the interval for expiry notification</decimalTextBox>
    </presentation>
    <presentation id="MpCloudBlockLevel">
     <dropdownList refId="MpCloudBlockLevel" noSort="true" defaultItem="0">Select cloud blocking level</dropdownList>
    </presentation>
    <presentation id="MpBafsExtendedTimeout">
     <decimalTextBox refId="MpBafsExtendedTimeout" defaultValue="0">Specify the extended cloud check time in seconds</decimalTextBox>
    </presentation>
    <presentation id="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess">
        <dropdownList refId="ExploitGuard_ControlledFolderAccess_EnableControlledFolderAccess" noSort="true" defaultItem="0">Configure the guard my folders feature</dropdownList>
    </presentation>
    <presentation id="ExploitGuard_ASR_ASROnlyExclusions">
        <listBox refId="ExploitGuard_ASR_ASROnlyExclusions">Exclusions from ASR rules:</listBox>
    </presentation>
    <presentation id="ExploitGuard_ASR_Rules">
        <listBox refId="ExploitGuard_ASR_Rules">Set the state for each ASR rule:</listBox>
    </presentation>
    <presentation id="ExploitGuard_ControlledFolderAccess_AllowedApplications">
        <listBox refId="ExploitGuard_ControlledFolderAccess_AllowedApplications">Enter the applications that should be trusted:</listBox>
    </presentation>
    <presentation id="ExploitGuard_ControlledFolderAccess_ProtectedFolders">
        <listBox refId="ExploitGuard_ControlledFolderAccess_ProtectedFolders">Enter the folders that should be guarded:</listBox>
    </presentation>
    <presentation id="ExploitGuard_EnableNetworkProtection">
        <dropdownList refId="ExploitGuard_EnableNetworkProtection" noSort="true" defaultItem="0"></dropdownList>
    </presentation>
    <presentation id="Root_PUAProtection">
        <dropdownList refId="Root_PUAProtection" noSort="true" defaultItem="0"></dropdownList>
    </presentation>
    <presentation id="DeviceControl_PolicyGroups">
    <textBox refId="DeviceControl_PolicyGroups">
        <label>Define the policy groups here</label>
    </textBox>
    </presentation>
    <presentation id="DeviceControl_PolicyRules">
    <textBox refId="DeviceControl_PolicyRules">
        <label>Define the policy rules here</label>
    </textBox>
    </presentation>
    <presentation id="SchedulerRandomizationTime">
        <decimalTextBox refId="SchedulerRandomizationTime" defaultValue="4">Specify scheduler randomization window in hours.</decimalTextBox>
    </presentation>
    <presentation id="PlatformUpdateChannelsDropDown">
    <dropdownList refId="UpdateChannelsDropDown" noSort="true" defaultItem="0">Select the channel for Microsoft Defender monthly platform updates:</dropdownList>
    </presentation>
    <presentation id="EngineUpdateChannelsDropDown">
    <dropdownList refId="UpdateChannelsDropDown" noSort="true" defaultItem="0">Select the channel for Microsoft Defender monthly engine updates:</dropdownList>
    </presentation>
    <presentation id="SecurityIntelligenceUpdateChannelsDropDown">
    <dropdownList refId="UpdateChannelsDropDown" noSort="true" defaultItem="0">Select the channel for Microsoft Defender daily security intelligence updates:</dropdownList>
    </presentation>
    <presentation id="DeviceControlDefaultEnforcementDropDown">
    <dropdownList refId="DeviceControlDefaultEnforcementDropDown" noSort="true" defaultItem="0">Select Device Control Default Enforcement Policy</dropdownList>
    </presentation>
    <presentation id="DeviceControl_DataDuplicationRemoteLocation">
    <textBox refId="DeviceControl_DataDuplicationRemoteLocation">
        <label>Define the Device Control data duplication remote location.</label>
    </textBox>
    </presentation>
	<presentation id="DeviceControl_DataDuplicationLocalRetentionPeriod">
		<decimalTextBox refId="DeviceControl_DataDuplicationLocalRetentionPeriod" defaultValue="60">Set the retention period for files in the local device control cache</decimalTextBox>
    </presentation>
	<presentation id="DeviceControl_SecuredDevicesConfiguration">
    <textBox refId="DeviceControl_SecuredDevicesConfiguration">
        <label>Turn on device control for specific device types</label>
    </textBox>
    </presentation>
   </presentationTable>
</resources>
</policyDefinitionResources>