Experimental support for AMD Zen-based CPUs was merged on September 18, 2020.
So far it has been validated to work on:
- Ryzen 3 3250U
- Ryzen 5 3600
- Ryzen 7 1700, 1800X, 2700X, 3700U, 3700X
- Ryzen 9 3900X, 3950X
- Ryzen 9 5950X as of 9c5bc8fa
- Ryzen 7 5800HS as of 030e34f8
- Ryzen 7 6800U as of d4c0e64a8
- Ryzen 5 4600H
- Threadripper 2950X, 3970X, 3990X
You may see the following message when running rr:
On Zen CPUs, rr will not work reliably unless you disable the hardware SpecLockMap optimization.
In that case, please run the scripts/zen_workaround.py script from the rr repository as root. You will need to rerun this script after each reboot/suspend. If you want the workaround to resist suspend, you may want to check the kernel module below.
If the scripts/zen_workaround.py script tells your the workaround doesn't stick, it means you'll have to try some other or additional workaround:
Status: confirmed.
The reason why the workaround doesn't stick is that the kernel switches Speculative Store Bypass mitigation on and off when switching between processes with different mitigation configuration. When doing so, it resets the workaround on a core. After some time, all cores have the workaround reset.
By either fully enabling or fully disabling SSB mitigation system wide, the workaround should be able to stick. This is done by adding either nospec_store_bypass_disable or spec_store_bypass_disable=on on the kernel command line. The former has security implications, and the latter has performance implications.
After boot, running the scripts/zen_workaround.py script should work.
Status: confirmed.
Note: Requires a kernel with CONFIG_TRACEPOINTS enabled. Has a small (probably unnoticeable) performance impact.
A kernel module can be used to apply the workaround in a way that prevents SSB mitigation from resetting it.
In the directory of the module, run make. Assuming you have all the right packages installed to build kernel modules, and that the path for modules is /lib/modules/$(uname -r).
Loading the module with insmod zen_workaround.ko (as root) should apply the workaround. This can be validated with scripts/zen_workaround.py --check.
Unloading the module with rmmod zen_workaround (as root) resets the workaround.
A previous version of the module, limited to kernel versions < 5.7 and requiring CONFIG_KALLSYMS_ALL had no performance impact other than the workaround itself. That version of the module doesn't preserve the workaround after resuming from suspend. You'll have to unload and reload the module.
Status: Confirmed
Recent versions of grub have a way to set MSRs. Older versions can use an external module.
Setting MSRs from grub, before the Linux kernel boots ensures the kernel will preserve the workaround, at the expense of not being able to disable it when not necessary.
First, determine the current MSR value with rdmsr from msr-tools:
rdmsr -x 0xc0011020
Take the resulting value (it's hexadecimal), and use your favorite REPL to set bit 54 and unset bit 10. For example in python:
>>> '0x%x' % ((0x<value_from_rdmsr> | (1 << 54)) & ~(1 << 10))
Now put that modified value in some appropriate location in your grub configuration:
wrmsr 0xc0011020 0x<modified_value>