This repository consists of a small command line application written in C to communicate with the data logger and an Electron based GUI which gives all of the functionality of the factory software for Windows.
First make sure you have the dependencies installed.
For the CLI you need:
- libusb1.0-dev
- scons (for building)
For the GUI you need:
- nodejs
- npm
sudo apt install npm libusb-1.0-0-dev scons
cd #to whatever folder you want to unpack in
git clone git@github.com:mp035/hantek-365.git
cd hantek-365
cd cli
scons
sudo cp 49-hantek.rules /etc/udev/rules.d
sudo service udev restart
cd ../gui
npm install
npm start
Plug in your Hantek and click the run button and you should be on your way.
Go to the cli folder in the project and execute ./hantek with the datalogger connected and powered up. The CLI application should report any issues connecting to your device.
How to build for Windows (Thanks trbLeeciN)
Things you need;
Zadig https://zadig.akeo.ie/
Zadig used to change driver of Hantek, since Hantek365 driver can not be used, so we need to change Hantek driver as libusb driver.
Mingw http://www.mingw.org/
Mingw is C complier. Make sure you install gcc too, I followed following guide to install Mingw.
http://www.mingw.org/wiki/howto_install_the_mingw_gcc_compiler_suite
After these I added path of mingw path as system variable path. I am not sure if it is necessary or not, but I did it and it works. Guide to add path is below, many examples can be found for this.
https://www.rose-hulman.edu/class/csse/resources/MinGW/installation.htm
Libusb Driver https://libusb.info/
Libusb is available in windows as libusb-1.0.dll. You need to download it. And place in the same folder with your .c file.
Modified .C file
To compily .c file you need some modifications. I used transfer_main.c file as main and modified it. You can find attached .c file in attachments. (Thanks to CanKoçak) I will add libusb driver for you in attachments. Also I will add my exe file, so if you need you can use it. I changed output format since I will use it in another application. So if all installed correctly, you will go to command prompt. in cmd: Go to source folder (where .c and .dll file is) type: gcc -o executable_filepath.exe source_filepath.c -lusb-1.0 If you done everything right you will get .exe file in the same folder. After that you need to change hantek driver by using Zadig and you are ready to go.