BoardConfig.mk

# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# config.mk
#
# Product-specific compile-time definitions.
#
# inherit from the proprietary version
-include vendor/huawei/g760/BoardConfigVendor.mk

LOCAL_PATH := device/huawei/g760

# DPM NSRM Feature
TARGET_LDPRELOAD := libNimsWrap.so

# Platform
TARGET_BOARD_PLATFORM := msm8916
TARGET_BOARD_PLATFORM_GPU := qcom-adreno306

# Bootloader
TARGET_NO_BOOTLOADER := true
TARGET_BOOTLOADER_BOARD_NAME := MSM8916

# Architecture
TARGET_ARCH := arm
TARGET_CPU_ABI  := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_CPU_VARIANT := cortex-a53
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_BOARD_SUFFIX := _32
TARGET_USE_QCOM_BIONIC_OPTIMIZATION := true

# ANT+
BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"

# Audio
BOARD_USES_ALSA_AUDIO := true
TARGET_USES_QCOM_MM_AUDIO := true
AUDIO_FEATURE_LOW_LATENCY_PRIMARY := true
AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
AUDIO_FEATURE_DEEP_BUFFER_RINGTONE := true
AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
COMMON_GLOBAL_CFLAGS += -DHUAWEI_SOUND_PARAM_PATH=\"/system/etc/sound_param/g620s_l01l02\"

# Bluetooth
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_QCOM := true
BLUETOOTH_HCI_USE_MCT := true

# NFC
BOARD_NFC_CHIPSET := pn547
BOARD_NFC_DEVICE := "/dev/pn544"

# Camera
USE_DEVICE_SPECIFIC_CAMERA := true
BOARD_USES_LEGACY_MMAP := true
TARGET_USE_VENDOR_CAMERA_EXT := true
COMMON_GLOBAL_CFLAGS += -DCAMERA_VENDOR_L_COMPAT
TARGET_USE_COMPAT_GRALLOC_ALIGN := true

# CMHW
BOARD_HARDWARE_CLASS := device/huawei/g760/cmhw

# Enables CSVT
TARGET_USES_CSVT := true

# Enable suspend during charger mode
BOARD_CHARGER_ENABLE_SUSPEND := true
BOARD_CHARGER_SHOW_PERCENTAGE := true

#Enable HW based full disk encryption
TARGET_HW_DISK_ENCRYPTION := false 
QSEECOM_DISK_ENCRYPTION := true

# Fonts
EXTENDED_FONT_FOOTPRINT := true

# GPS
TARGET_GPS_HAL_PATH := $(LOCAL_PATH)/gps
TARGET_NO_RPC := true

# Graphics
TARGET_HARDWARE_3D := false
OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
MAX_EGL_CACHE_KEY_SIZE := 12*1024
MAX_EGL_CACHE_SIZE := 2048*1024
TARGET_USES_ION := true
TARGET_USES_NEW_ION_API :=true
TARGET_USES_OVERLAY := true
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
TARGET_USES_C2D_COMPOSITION := true
USE_OPENGL_RENDERER := true
TARGET_CONTINUOUS_SPLASH_ENABLED := true

# Init
TARGET_UNIFIED_DEVICE := true
TARGET_INIT_VENDOR_LIB := libinit_msm
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
TARGET_LIBINIT_DEFINES_FILE := $(LOCAL_PATH)/init/init_g760.c

# adb has root
ADDITIONAL_DEFAULT_PROPERTIES += ro.adb.secure=0
ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0
ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1
ADDITIONAL_DEFAULT_PROPERTIES += ro.config.show_battery_id=true 
ADDITIONAL_DEFAULT_PROPERTIES += ro.mmi.battery.minvalue=170 

# Kernel
BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=30 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 androidboot.selinux=enforcing
BOARD_KERNEL_SEPARATED_DT := true
BOARD_KERNEL_BASE        := 0x80000000
BOARD_KERNEL_PAGESIZE    := 2048
BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
BOARD_RAMDISK_OFFSET     := 0x02000000
TARGET_KERNEL_SOURCE := kernel/huawei/msm8916
TARGET_KERNEL_CONFIG := g760_defconfig
TARGET_SELINUX_CONFIG := g760_defconfig
BOARD_DTBTOOL_ARGS := -2
TARGET_KERNEL_ARCH := arm

# Partitions
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 131072
BOARD_BOOTIMAGE_PARTITION_SIZE := 20971520
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 25165824
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1879048192
BOARD_USERDATAIMAGE_PARTITION_SIZE := 4513037312
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432

# Libc extensions
BOARD_PROVIDES_ADDITIONAL_BIONIC_STATIC_LIBS += libc_huawei_symbols

# Power
TARGET_POWERHAL_VARIANT := qcom

# Qualcomm support
BOARD_USES_QCOM_HARDWARE := true

# Recovery
TARGET_RECOVERY_FSTAB := $(LOCAL_PATH)/recovery.fstab

# Time services
BOARD_USES_QC_TIME_SERVICES := true

# Liblight
TARGET_PROVIDES_LIBLIGHT := true

# Logging
TARGET_USES_LOGD := false

# RIL
TARGET_RIL_VARIANT := caf
PROTOBUF_SUPPORTED := true


# FM
AUDIO_FEATURE_ENABLED_FM := true
TARGET_QCOM_NO_FM_FIRMWARE := true
BOARD_HAVE_QCOM_FM := true

# SELinux
include device/qcom/sepolicy/sepolicy.mk

BOARD_SEPOLICY_DIRS += \
    device/huawei/g760/sepolicy

BOARD_SEPOLICY_UNION += \
    bootanim.te \
    diag.te \
    file.te \
    file_contexts \
    init.te \
    mm-qcamerad.te \
    mpdecision.te \
    netd.te \
    system_server.te

TARGET_SYSTEM_PROP := $(LOCAL_PATH)/system.prop

#Use dlmalloc instead of jemalloc for mallocs
MALLOC_IMPL := dlmalloc

# Assert
#TARGET_OTA_ASSERT_DEVICE := g620s,G620S,hwg620s,hwG620S,G620S-L01
TARGET_OTA_ASSERT_DEVICE := g620s,G620S,hwg620s,hwG620S,G620S-L01,g760,G760,hwg760,G760-L01,G760-L03

# Vold
TARGET_USE_CUSTOM_LUN_FILE_PATH := /sys/devices/platform/msm_hsusb/gadget/lun%d/file
BOARD_VOLD_DISC_HAS_MULTIPLE_MAJORS := true
BOARD_VOLD_MAX_PARTITIONS := 40

# Wifi
BOARD_HAS_QCOM_WLAN := true
BOARD_HAS_QCOM_WLAN_SDK := true
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_qcwcn
BOARD_WLAN_DEVICE := qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_qcwcn
TARGET_USES_WCNSS_CTRL := true
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_STA := "sta"
WIFI_BAND := 802_11_ABGN
WPA_SUPPLICANT_VERSION := VER_0_8_X

# Webkit
ENABLE_WEBGL := true
TARGET_FORCE_CPU_UPLOAD := true

# Compression - Smoosh all the things
# TARGET_TRANSPARENT_COMPRESSION_METHOD := lz4

# Enable dex-preoptimization to speed up first boot sequence
# Dexopt, only if we can fit that in
# ifneq ($(TARGET_TRANSPARENT_COMPRESSION_METHOD),)
ifeq ($(HOST_OS),linux)
  ifeq ($(TARGET_BUILD_VARIANT),userdebug)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
    endif
  endif
endif
# endif
DONT_DEXPREOPT_PREBUILTS := true