You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Well I thought I had some luck with this all in one display with a built in ESP32 Wroom 32 when I changed the pins for the xpt2046 MOSI,MOSO and CLK to share with sdcard. I do have it set to TFT_Card_Version 2. I get the calibration coming up and touch works but then the screen just goes black with no menus. I do have calibrate.txt on the sdcard and it reads it fine. I also get the wifi working and can access the webpage and can upload files. I just cannot get anything to the screen after the calibration is done or if the card is ejected.; I have tried everything I can think of so here is a zip file with the modified schematics, user_settings.h and config.h as well as the manual for the display assembly. Any help would be wonderful and thank you for the work on this project. GRBL_Controlller_esp32_settings.zip
The text was updated successfully, but these errors were encountered:
Well I thought I had some luck with this all in one display with a built in ESP32 Wroom 32 when I changed the pins for the xpt2046 MOSI,MOSO and CLK to share with sdcard. I do have it set to TFT_Card_Version 2. I get the calibration coming up and touch works but then the screen just goes black with no menus. I do have calibrate.txt on the sdcard and it reads it fine. I also get the wifi working and can access the webpage and can upload files. I just cannot get anything to the screen after the calibration is done or if the card is ejected.; I have tried everything I can think of so here is a zip file with the modified schematics, user_settings.h and config.h as well as the manual for the display assembly. Any help would be wonderful and thank you for the work on this project.
GRBL_Controlller_esp32_settings.zip
The text was updated successfully, but these errors were encountered: