/
cmdtab.h
1642 lines (1511 loc) · 110 KB
/
cmdtab.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/* CMDTAB.H (c) Copyright Roger Bowler, 1999-2011 */
/* (c) Copyright "Fish" (David B. Trout), 2002-2009 */
/* (c) Copyright Jan Jaeger, 2003-2009 */
/* (c) Copyright TurboHercules, SAS 2010-2011 */
/* Defines all Hercules Configuration statements */
/* and panel commands */
/* */
/* Released under "The Q Public License Version 1" */
/* (http://www.hercules-390.org/herclic.html) as modifications to */
/* Hercules. */
// $Id$
/*-------------------------------------------------------------------*/
/* Command descriptions and help text */
/*-------------------------------------------------------------------*/
#if defined( _FW_REF ) /* (pre-table build pass) */
#define bangmsg_cmd_desc "SCP priority messsage"
#define bangmsg_cmd_help \
\
"To enter a system control program (i.e. guest operating system)\n" \
"priority command on the hercules console, simply prefix the command\n" \
"with an exclamation point '!'.\n"
#define hash_cmd_desc "Silent comment"
#define star_cmd_desc "Loud comment"
#define reply_cmd_desc "SCP command"
#define reply_cmd_help \
\
"To reply to a system control program (i.e. guest operating system)\n" \
"message that gets issued to the hercules console, prefix the reply\n" \
"with a period.\n"
#define quest_cmd_desc "alias for help"
#define aea_cmd_desc "Display AEA tables"
#define aia_cmd_desc "Display AIA fields"
#define alrf_cmd_desc "Command deprecated: Use \"archlvl enable|disable|query asn_lx_reuse\" instead"
#define ar_cmd_desc "Display access registers"
#define archlvl_cmd_desc "Set Architecture Level"
#define archlvl_cmd_help \
\
"Format: archlvl s/370|als0 | esa/390|als1 | esame|als2 | z/arch|als3\n" \
" enable|disable <facility> [s/370|esa/390|z/arch]\n" \
" query [<facility> | all]\n" \
"command without any argument simply displays the current architecture\n" \
"mode. Entering the command with an argument sets the architecture mode\n" \
"to the specified value.\n"
#define archmode_cmd_desc "Alias for archlvl"
#define asnlx_cmd_desc "Command deprecated: Use \"archlvl enable|disable|query asn_lx_reuse\" instead"
#define attach_cmd_desc "Configure device"
#define attach_cmd_help \
\
"Format: \"attach devn type [arg...]\n"
#define autoscsi_cmd_desc "Command deprecated - Use \"SCSIMOUNT\""
#define autoscsi_cmd_help \
\
"This command is deprecated. Use \"scsimount\" instead.\n"
#define autoinit_cmd_desc "Display/Set automatic create empty tape file switch"
#define autoinit_cmd_help \
\
"Format: \"autoinit [on|off]\"\n" \
"Default for autoinit is off.\n" \
"When autoinit is off, devinit will return a file not found error\n" \
"if the specified file is not found.\n" \
"When autoinit is on, devinit will initialize a blank, non-labeled\n" \
"tape if the requested file is not found. Tape will have two tapemarks\n" \
"and be positioned at the beginning of the tape."
#define automount_cmd_desc "Display/Update allowable tape automount directories"
#define automount_cmd_help \
\
"Format: \"automount { add <dir> | del <dir> | list }\"\n" \
"\n" \
"Adds or deletes entries from the list of allowable/unallowable tape\n" \
"automount directories, or lists all currently defined list entries,\n" \
"if any.\n" \
"\n" \
"The format of the <dir> directory operand for add/del operations is\n" \
"identical to that as described in the documentation for the AUTOMOUNT\n" \
"configuration file statement (i.e. prefix with '+' or '-' as needed).\n" \
"\n" \
"The automount feature is appropriately enabled or disabled for all\n" \
"tape devices as needed depending on the updated empty/non-empty list\n" \
"state.\n"
#define bminus_cm_desc "Delete breakpoint"
#define bminus_cm_help \
\
"Format: \"b-\" This command is the same as \"s-\"\n"
#define b_cmd_desc "Set breakpoint"
#define b_cmd_help \
\
"Format: \"b addr\" or \"b addr-addr\" where 'addr' is the instruction\n" \
"address or range of addresses where you wish to halt execution. This\n" \
"command is synonymous with the \"s+\" command.\n"
#define bplus_cmd_desc "Set breakpoint"
#define cache_cmd_desc "Execute cache related commands"
#define cache_cmd_help \
\
"Format: \"cache [dasd system [on|off]]\"\n" \
"\n" \
"dasd system on|off will enable(on) or disable(off) caching for\n" \
" all dasd devices\n" \
"dasd system will present status of system dasd caching\n" \
"\n" \
"Command without arguments will present cache stats.\n"
#define cachestats_cmd_desc "Cache stats command"
#define capping_cmd_desc "Set/display capping value"
#define capping_cmd_help \
\
"Format: capping [ n | off ]\n" \
" If no operands are specified, the current capping value is displayed,\n" \
" the value represents the maximum total number of MIPS for all of the\n" \
" 'CP' type processors.\n" \
"\n" \
" n Maximum total number of MIPS for all of the 'CP' type processors.\n" \
" A zero value will turn off MIP capping\n" \
" off Turn off capping\n"
#define cckd_cmd_desc "cckd command"
#define cckd_cmd_help \
\
"The cckd statement is used to display current cckd processing\n" \
"options and statistics, and to set new cckd options.\n" \
"Type \"cckd help\" for additional information.\n"
#define cd_cmd_desc "Change directory"
#define cf_cmd_desc "Configure current CPU online or offline"
#define cf_cmd_help \
\
"Configure current CPU online or offline: Format-> \"cf [on|off]\"\n" \
"Where the 'current' CPU is defined as whatever CPU was defined as\n" \
"the panel command target cpu via the \"cpu\" panel command. (Refer\n" \
"to the 'cpu' command for further information) Entering 'cf' by itself\n" \
"simply displays the current online/offline status of the current cpu.\n" \
"Otherwise the current cpu is configured online or offline as\n" \
"specified.\n" \
"Use 'cfall' to configure/display all CPUs online/offline state.\n"
#define cfall_cmd_desc "Configure all CPU's online or offline"
#define clocks_cmd_desc "Display tod clkc and cpu timer"
#define cmdlevel_cmd_desc "Display/Set current command group"
#define cmdlevel_cmd_help \
\
"Format: cmdlevel [{+/-}{ALL|MAINT|PROGrammer|OPERator|DEVELoper}]\n"
#define cmdlvl_cmd_desc "(alias for cmdlevel)"
#define cmdsep_cmd_desc "Display/Set command line separator"
#define cmdsep_cmd_help \
\
"A command line separator character allows multiple commands\n" \
"to be entered on a single line.\n" \
"\n" \
"Format: cmdsep [c | off ]\n" \
" c a single character used for command separation. Must\n" \
" not be '.', '!', or '-'. Note: using '#' may prevent\n" \
" lines with comments from being processed correctly.\n" \
" off disables command separation.\n"
#define cmdtgt_cmd_desc "Specify the command target"
#define cmdtgt_cmd_help \
\
"Format: \"cmdtgt [herc | scp | pscp | ?]\". Specify the command target.\n"
#define cnslport_cmd_desc "Set console port"
#define codepage_cmd_desc "Set/display code page conversion table"
#define codepage_cmd_help \
\
"Format: 'codepage [cp]'\n" \
" 'codepage maint cmd [operands]' - see cp_updt command for\n" \
" help\n" \
"If no operand is specified, the current codepage is displayed.\n" \
"If 'cp' is specified, then code page is set to the specified page\n" \
"if the page is valid.\n"
#define conkpalv_cmd_desc "Display/alter console TCP keep-alive settings"
#define conkpalv_cmd_help \
\
"Format: \"conkpalv (idle, intv, count)\" where 'idle', 'intv' and 'count'\n" \
"are the new values for the TCP keep-alive settings for console\n" \
"connections:\n" \
"- send probe when connection goes idle for 'idle' seconds\n" \
"- wait maximum of 'intv' seconds for a response to probe\n" \
"- disconnect after 'count' consecutive failed probes\n" \
"The format must be exactly as shown, with each value separated from\n" \
"the next by a single comma, no intervening spaces between them,\n" \
"surrounded by parenthesis. The command \"conkpalv\" without any operand\n" \
"displays the current values.\n"
#define count_cmd_desc "Display/clear overall instruction count"
#define cp_updt_cmd_desc "Create/Modify user character conversion table"
#define cp_updt_cmd_help \
\
"Format: 'cp_updt cmd [operands]'\n" \
"\n" \
" altER e|g2h|a|h2g (pos, val, pos, val,...)\n" \
" - alter the user eBCDIC/g2h or aSCII/h2g\n" \
" table value at hex POSition to hex\n" \
" VALue 16 pairs of hex digits may be\n" \
" specified within the parens\n" \
"\n" \
" dsp|disPLAY e|g2h|a|h2g - display user eBCDIC|aSCII table\n" \
"\n" \
" expORT e|g2h|a|h2g filename - export contents of user table to file\n" \
"\n" \
" impORT e|g2h|a|h2g filename - import file contents into user table\n" \
"\n" \
" refERENCE [cp] - copy codepage to user tables\n" \
" if cp is not specified, a list of\n" \
" valid codepage tables is generated\n" \
"\n" \
" reset - reset the internal user tables to\n" \
" binary zero\n" \
"\n" \
" test - verify that user tables are\n" \
" transparent, i.e. the value at\n" \
" position n in g2h used as an index\n" \
" into h2g will return a value equal n\n" \
" ( g2h<=>h2g, h2g<=>g2h )\n" \
"\n" \
" *e|g2h represent ebcdic; a|h2g represent ascii\n" \
" **lower case part of the cmd name represent the minimum abbreviation\n" \
" for the command\n" \
"\n" \
"To activate the user table, enter the command 'codepage user'\n" \
"\n" \
"Note: ebcdic refers to guest to host translation\n" \
" ascii refers to host to guest translation\n" \
" These terms are used for historical purposes and do not\n" \
" represent the literal term.\n"
#define cpu_cmd_desc "Define target cpu for panel display and commands"
#define cpu_cmd_help \
\
"Format: \"cpu xx\" where 'xx' is the hexadecimal cpu address of the cpu\n" \
"in your multiprocessor configuration which you wish all panel commands\n" \
"to apply to. If command text follows the cpu address, the command will\n" \
"execute on cpu xx and the target cpu will not be permanently changed.\n" \
"For example, entering 'cpu 1F' followed by \"gpr\" will change the\n" \
"target cpu for the panel display and commands and then display the\n" \
"general purpose registers for cpu 31 of your configuration. Entering\n" \
"'cpu 14 gpr' will execute the 'gpr' command on cpu 20, but will not\n" \
"change the target cpu for subsequent panel displays and commands.\n"
#define cpuidfmt_cmd_desc "Set format 0/1 STIDP generation"
#define cpumodel_cmd_desc "Set CPU model number"
#define cpuprio_cmd_desc "Set/Display cpuprio parameter"
#define cpuserial_cmd_desc "Set CPU serial number"
#define cpuverid_cmd_desc "Set CPU verion number"
#define cr_cmd_desc "Display or alter control registers"
#define cr_cmd_help \
\
"Format: \"cr [nn=xxxxxxxxxxxxxxxx]\" where 'nn' is the optional\n" \
"control register number (0 to 15) and 'xxxxxxxxxxxxxxxx' is the\n" \
"control register value in hex (1-8 hex digits for 32-bit registers\n" \
"or 1-16 hex digits for 64-bit registers). Enter \"cr\" by itself to\n" \
"display the control registers without altering them.\n"
#define cscript_cmd_desc "Cancels a running script thread"
#define cscript_cmd_help \
\
"Format: \"cscript ['*' | 'ALL' | id]\". This command cancels a running\n" \
"script or all scripts. If '*' or 'ALL' is given then all running scripts\n" \
"are canceled. If no arguments are given only the first running script is\n" \
"cancelled. Otherwise the specific script 'id' is canceled. The 'script'\n" \
"command may be used to display a list of all currently running scripts.\n"
#define ctc_cmd_desc "Enable/Disable CTC debugging"
#define ctc_cmd_help \
\
"Format: \"ctc debug { on | off } [ <devnum> | ALL ]\".\n\n" \
"Enables/disables debug packet tracing for the specified CTCI/LCS/PTP\n" \
"device group(s) identified by <devnum> or for all CTCI/LCS/PTP device\n" \
"groups if <devnum> is not specified or specified as 'ALL'.\n"
#define define_cmd_desc "Rename device"
#define define_cmd_help \
\
"Format: \"define olddevn newdevn\"\n"
#define defstore_cmd_desc "Define/Display main and expanded storage values"
#define defstore_cmd_help \
\
"Format: defstorE [ mAIN [ ssss[S] [ lOCK | unlOCK ] ] ]\n" \
" [ xSTORE | eXPANDED [ ssss[S] [ lOCK | unlOCK ] ] ]\n" \
" Main and Expanded Storage may be specified on the same command\n" \
" line.\n" \
"\n" \
" Without any options, display current settings for both\n" \
" types of storage\n" \
"\n" \
" mAIN - define/display main storage allocations\n" \
" xSTORE - define/display expanded storage allocations\n" \
" eXPANDED\n" \
"\n" \
" ssss - specify amount of storate in M units\n" \
" ssssS - specify amount of storage in 'S' units where 'S' is\n" \
" B = no multiplier - main only\n" \
" K = 2**10 (kilo/kibi) - main only\n" \
" M = 2**20 (mega/mebi)\n" \
" G = 2**30 (giga/gibi)\n" \
" T = 2**40 (tera/tebi) - not 32-bit\n" \
" P = 2**50 (peta/pebi) - not 32-bit\n" \
" E = 2**60 (exa/exbi) - not 32-bit\n" \
"\n" \
" lOCK - attempt to lock storage (pages lock by host OS)\n" \
" unlOCK - leave storage unlocked (pagable by host OS)\n" \
"\n" \
" (none) - display current value(s)\n" \
"\n" \
" Note: Multipliers 'T', 'P', and 'E' are not available on 32bit machines\n" \
" Expanded Storage is allocated in minimum of 1M units\n"
#define defsym_cmd_desc "Define symbol"
#define defsym_cmd_help \
\
"Format: \"defsym symbol [value]\". Defines symbol 'symbol' to contain\n" \
"value 'value'. The symbol can then be the object of a substitution for\n" \
"later panel commands. If 'value' contains blanks or spaces, then it\n" \
"must be enclosed within quotes or apostrophes. For more detailed\n" \
"information regarding symbol substitution refer to the 'DEFSYM'\n" \
"configuration file statement in Hercules documentation.\n" \
"Enter \"defsym\" by itself to display the values of all defined\n" \
"symbols.\n"
#define delsym_cmd_desc "Delete a symbol"
#define delsym_cmd_help \
\
"Format: \"delsym symbol\". Deletes symbol 'symbol'.\n"
#define detach_cmd_desc "Remove device"
#define devinit_cmd_desc "Reinitialize device"
#define devinit_cmd_help \
\
"Format: \"devinit devn [arg...]\"\n" \
"If no arguments are given then the same arguments are used\n" \
"as were used the last time the device was created/initialized.\n"
#define devlist_cmd_desc "List device, device class, or all devices"
#define devlist_cmd_help \
\
"Format: \"devlist [devn | devc]\"\n" \
" devn is a single device address\n" \
" devc is a single device class. Device classes are CON,\n" \
" CTCA, DASD, DSP, LINE, PCH, PRT, QETH, RDR, and TAPE.\n" \
"\n" \
"If no arguments are given then all devices will be listed.\n"
#define devprio_cmd_desc "Set/Display devprio parameter"
#define devtmax_cmd_desc "Display or set max device threads"
#define devtmax_cmd_help \
\
"Specifies the maximum number of device threads allowed.\n" \
"\n" \
"Specify -1 to cause 'one time only' temporary threads to be created\n" \
"to service each I/O request to a device. Once the I/O request is\n" \
"complete, the thread exits. Subsequent I/O to the same device will\n" \
"cause another worker thread to be created again.\n" \
"\n" \
"Specify 0 to cause an unlimited number of 'semi-permanent' threads\n" \
"to be created on an 'as-needed' basis. With this option, a thread\n" \
"is created to service an I/O request for a device if one doesn't\n" \
"already exist, but once the I/O is complete, the thread enters an\n" \
"idle state waiting for new work. If a new I/O request for the device\n" \
"arrives before the timeout period expires, the existing thread will\n" \
"be reused. The timeout value is currently hard coded at 5 minutes.\n" \
"Note that this option can cause one thread (or possibly more) to be\n" \
"created for each device defined in your configuration. Specifying 0\n" \
"means there is no limit to the number of threads that can be created.\n" \
"\n" \
"Specify a value from 1 to nnn to set an upper limit to the number of\n" \
"threads that can be created to service any I/O request to any device.\n" \
"Like the 0 option, each thread, once done servicing an I/O request,\n" \
"enters an idle state. If a new request arrives before the timeout\n" \
"period expires, the thread is reused. If all threads are busy when a\n" \
"new I/O request arrives however, a new thread is created only if the\n" \
"specified maximum has not yet been reached. If the specified maximum\n" \
"number of threads has already been reached, then the I/O request is\n" \
"placed in a queue and will be serviced by the first available thread\n" \
"(i.e. by whichever thread becomes idle first). This option was created\n" \
"to address a threading issue (possibly related to the cygwin Pthreads\n" \
"implementation) on Windows systems.\n" \
"\n" \
"The default for Windows is 8. The default for all other systems is 0.\n"
#define diag8_cmd_desc "Set diag8 command option"
#define dir_cmd_desc "Displays a list of files and subdirs in a directory"
#define ds_cmd_desc "Display subchannel"
#define ecps_cmd_desc "Command deprecated - Use \"ECPSVM\""
#define ecps_cmd_help \
\
"This command is deprecated. Use \"ecpsvm\" instead.\n"
#define ecpsvm_cmd_desc "ECPS:VM Commands"
#define ecpsvm_cmd_help \
\
"Format: \"ecpsvm\". This command invokes ECPS:VM Subcommands.\n" \
"Type \"ecpsvm help\" to see a list of available commands\n"
#define engines_cmd_desc "Set engines parameter"
#define evm_cmd_desc "Command deprecated - Use \"ECPSVM\""
#define evm_cmd_help \
\
"This command is deprecated. Use \"ecpsvm\" instead.\n"
#if defined(ENABLE_OBJECT_REXX) || defined(ENABLE_REGINA_REXX)
#define exec_cmd_desc "Execute a REXX script"
#define exec_cmd_help \
\
"Format: \"exec rexx_exec [args...]\" where 'rexx_exec' is the name of\n" \
"the REXX script, and 'args' are arguments (separated by spaces) to be\n" \
"passed to the script.\n"
#endif /* defined(ENABLE_OBJECT_REXX) || defined(ENABLE_REGINA_REXX) */
#define exit_cmd_desc "(Synonym for 'quit')"
#define ext_cmd_desc "Generate external interrupt"
#define f_cmd_desc "Mark frames unusable/usable"
#define fcb_cmd_desc "Display the current FCB (if only the printer is given)"
#define fcb_cmd_help \
\
"Reset the fcb to the standard one\n" \
"Load a fcb image\n"
#define fish_hang_cmd_desc "(deprecated; use 'hangrpt' instead)"
#define fpc_cmd_desc "Display or alter floating point control register"
#define fpc_cmd_help \
\
"Format: \"fpc [xxxxxxxxxxxxxxxx]\" where 'xxxxxxxxxxxxxxxx' is the\n" \
"register value in hexadecimal (1-8 hex digits). Enter \"fpc\" by itself\n" \
"to display the register value without altering it.\n"
#define fpr_cmd_desc "Display or alter floating point registers"
#define fpr_cmd_help \
\
"Format: \"fpr [nn=xxxxxxxxxxxxxxxx]\" where 'nn' is the register number\n" \
"(0 to 15 or 0, 2, 4 or 6 depending on the Control Register 0 AFP bit) and\n" \
"'xxxxxxxxxxxxxxxx' is the register value in hexadecimal (1-16 hex digits\n" \
"for 64-bit registers). Enter \"fpr\" by itself to display the register\n" \
"values without altering them.\n"
#define g_cmd_desc "Turn off instruction stepping and start all CPUs"
#define gpr_cmd_desc "Display or alter general purpose registers"
#define gpr_cmd_help \
\
"Format: \"gpr [nn=xxxxxxxxxxxxxxxx]\" where 'nn' is the optional\n" \
"register number (0 to 15) and 'xxxxxxxxxxxxxxxx' is the register\n" \
"value in hexadecimal (1-8 hex digits for 32-bit registers or 1-16 hex\n" \
"digits for 64-bit registers). Enter \"gpr\" by itself to display the\n" \
"register values without altering them.\n"
#define hang_cmd_desc "Display thread/lock/event objects (DEBUG)"
#define hang_cmd_help \
\
"When built with --enable-fthreads --enable-fishhang, a detailed record of\n" \
"every thread, lock and event that is created is maintained for debugging purposes.\n" \
"If a lock is accessed before it has been initialized or if a thread exits while\n" \
"still holding a lock, etc (including deadlock situations), the FishHang logic will\n" \
"detect and report it. If you suspect one of hercules's threads is hung waiting for\n" \
"a condition to be signalled for example, entering \"FishHangReport\" will display\n" \
"the internal list of thread, locks and events to possibly help you determine where\n" \
"it's hanging and what event (condition) it's hung on.\n"
#define hao_cmd_desc "Hercules Automatic Operator"
#define hao_cmd_help \
\
"Format: \"hao tgt <tgt> | cmd <cmd> | list <n> | del <n> | clear \".\n" \
" hao tgt <tgt> : define target rule (regex pattern) to react on\n" \
" hao cmd <cmd> : define command for previously defined rule\n" \
" hao list <n> : list all rules/commands or only at index <n>\n" \
" hao del <n> : delete the rule at index <n>\n" \
" hao clear : delete all rules (stops automatic operator)\n"
#define help_cmd_desc "list all commands / command specific help"
#define help_cmd_help \
\
"Format: \"help [cmd|c*]\".\n" \
"\n" \
"The command without any options will display a short description\n" \
"of all of the commands available matching the current cmdlevel. You\n" \
"may specify a partial command name followed by an '*' to get a\n" \
"list matching the partial command name. For example 'help msg*'\n" \
"will list all commands beginning with 'msg' and matching the current\n" \
"cmdlevel.\n" \
"\n" \
"This command with the 'cmd' option will display a long form of help\n" \
"information associated with that command if the command is available\n" \
"for the current cmdlevel.\n" \
"\n" \
"Help text may be limited to explaining the general format of the\n" \
"command and its various required or optional parameters and is not\n" \
"meant to replace the appropriate manual.\n"
#define herc_cmd_desc "Hercules command"
#define herc_cmd_help \
\
"Format: \"herc [cmd]\". Send hercules cmd in any cmdtgt mode.\n"
#define herclogo_cmd_desc "Read a new hercules logo file"
#define herclogo_cmd_help \
\
"Format: \"herclogo [<filename>]\". Load a new logo file for 3270\n" \
"terminal sessions. If no filename is specified, the built-in logo\n" \
"is used instead.\n"
#define hercprio_cmd_desc "Set/Display hercprio parameter"
#define hst_cmd_desc "History of commands"
#define hst_cmd_help \
\
"Format: \"hst | hst n | hst l\". Command \"hst l\" or \"hst 0\" displays\n" \
"list of last ten commands entered from command line\n" \
"hst n, where n is a positive number retrieves n-th command from list\n" \
"hst n, where n is a negative number retrieves n-th last command\n" \
"hst without an argument works exactly as hst -1, it retrieves the\n" \
"last command\n"
#define http_cmd_desc "Start/Stop/Modify/Display HTTP Server"
#define http_cmd_help \
\
"Format: 'http [start|stop|port nnnn [[noauth]|[auth user pass]]|root path]'\n" \
"\n" \
"start - starts HTTP server if stopped\n" \
"stop - stops HTTP server if started\n" \
"port nnnn [[noauth]|[auth user pass]] - set port and optional authorization.\n" \
" Default is noauthorization needed.\n" \
" 'auth' requires a user and password\n" \
"\n" \
"root path - set the root file path name\n" \
"\n" \
"<none> - display status of HTTP server\n"
#define httpport_cmd_desc "Command deprecated - Use \"HTTP PORT ...\""
#define httpport_cmd_help \
\
"This command is deprecated. Use \"http port ...\" instead.\n"
#define httproot_cmd_desc "Command deprecated - Use \"HTTP ROOT fn\""
#define httproot_cmd_help \
\
"This command is deprecated. Use \"http root fn\" instead.\n"
#define i_cmd_desc "Generate I/O attention interrupt for device"
#define icount_cmd_desc "Display individual instruction counts"
#define iodelay_cmd_desc "Display or set I/O delay value"
#define iodelay_cmd_help \
\
"Format: \"iodelay n\".\n\n" \
"Specifies the amount of time (in microseconds) to wait after an\n" \
"I/O interrupt is ready to be set pending. This value can also be\n" \
"set using the Hercules console. The purpose of this parameter is\n" \
"to bypass a bug in the Linux/390 and zLinux dasd.c device driver.\n" \
"The problem is more apt to happen under Hercules than on a real\n" \
"machine because we may present an I/O interrupt sooner than a\n" \
"real machine.\n"
#define ipending_cmd_desc "Display pending interrupts"
#define ipl_cmd_desc "IPL from device or file"
#define ipl_cmd_help \
\
"Format: \"ipl xxxx | cccc [loadparm xxxxnnnn | parm xxxxxxxxxxxxxx] [clear]\""\
"\n\n" \
"Performs the Initial Program Load manual control function. If the\n" \
"first operand 'xxxx' is a 1- to 4-digit hexadecimal number, a\n" \
"CCW-type IPL is initiated from the indicated device number, and\n" \
"SCLP disk I/O is disabled. Otherwise a list-directed IPL is performed\n" \
"from the .ins file named 'cccc', and SCLP disk I/O is enabled for the\n" \
"directory path where the .ins file is located.\n" \
"\n" \
"An optional 'loadparm' keyword followed by a 1-8 character string can\n" \
"be used to set the LOADPARM prior to the IPL.\n" \
"\n" \
"An optional 'parm' keyword followed by a string can also be passed to\n" \
"the IPL command processor. The string will be loaded into the\n" \
"low-order 32 bits of the general purpose registers (4 characters per\n" \
"register for up to 64 bytes). The PARM option behaves similarly to\n" \
"the VM IPL command.\n" \
"\n" \
"An optional 'clear' keyword will initiate a Load Clear manual control\n" \
"function, prior to starting an IPL.\n"
#define iplc_cmd_desc "Command deprecated - use IPL with clear option"
#define iplc_cmd_help \
\
"This command is deprecated. Use \"ipl\" with clear option specified instead.\n"
#define k_cmd_desc "Display cckd internal trace"
#define kd_cmd_desc "Short form of 'msghld clear'"
#define ldmod_cmd_desc "Load a module"
#define ldmod_cmd_help \
\
"Format: \"ldmod module ...\"\n" \
"Specifies additional modules that are to be loaded by the\n" \
"Hercules dynamic loader.\n"
#define legacy_cmd_desc "Set legacysenseid setting"
#define loadcore_cmd_desc "Load a core image file"
#define loadcore_cmd_help \
\
"Format: \"loadcore filename [address]\" where 'address' is the storage\n" \
"address of where to begin loading memory. The file 'filename' is\n" \
"presumed to be a pure binary image file previously created via the\n" \
"'savecore' command. The default for 'address' is 0 (beginning of\n" \
"storage).\n"
#define loadparm_cmd_desc "Set IPL parameter"
#define loadparm_cmd_help \
\
"Specifies the eight-character IPL parameter which is used by\n" \
"some operating systems to select system parameters."
#define loadtext_cmd_desc "Load a text deck file"
#define loadtext_cmd_help \
\
"Format: \"loadtext filename [address]\". This command is essentially\n" \
"identical to the 'loadcore' command except that it loads a text deck\n" \
"file with \"TXT\" and \"END\" 80 byte records (i.e. an object deck).\n"
#define log_cmd_desc "Direct logger output"
#define log_cmd_help \
\
"Format: \"log [ OFF | newfile ]\". Sets log filename or stops\n" \
"log file output with the \"OFF\" option."
#define logopt_cmd_desc "Set/Display logging options"
#define logopt_cmd_help \
\
"Format: \"logopt [timestamp | notimestamp]\". Sets logging options.\n" \
"\"timestamp\" inserts a time stamp in front of each log message.\n" \
"\"notimestamp\" displays log messages with no time stamps. Entering\n" \
"the command with no arguments displays current logging options.\n" \
"\"timestamp\" and \"notimestamp\" may be abbreviated as \"time\"\n" \
"and \"notime\" respectively.\n"
#define lparname_cmd_desc "Set LPAR name"
#define lparname_cmd_help \
\
"Specifies the eight-character LPAR name returned by\n" \
"DIAG X'204'. The default is HERCULES"
#define lparnum_cmd_desc "Set LPAR identification number"
#define lparnum_cmd_help \
\
"Specifies the one- or two-digit hexadecimal LPAR identification\n" \
"number stored by the STIDP instruction. If a one-digit number\n" \
"is specified then STIDP stores a format-0 CPU ID. If a two-digit\n" \
"number is specified then STIDP stores a format-1 CPU ID. If\n" \
"LPARNUM is not specified, then STIDP stores a basic-mode CPUID"
#define ls_cmd_desc "List directory contents"
#define lsdep_cmd_desc "List module dependencies"
#define lsmod_cmd_desc "List dynamic modules"
#define mainsize_cmd_desc "Define/Display mainsize parameter"
#define mainsize_cmd_help \
\
"Format: mainsize [ mmmm | nnnS [ lOCK | unlOCK ] ]\n" \
" mmmm - define main storage size mmmm Megabytes\n" \
"\n" \
" nnnS - define main storage size nnn S where S is the multiplier\n" \
" B = no multiplier\n" \
" K = 2**10 (kilo/kibi)\n" \
" M = 2**20 (mega/mebi)\n" \
" G = 2**30 (giga/gibi)\n" \
" T = 2**40 (tera/tebi)\n" \
" P = 2**50 (peta/pebi)\n" \
" E = 2**60 (exa/exbi)\n" \
"\n" \
" lOCK - attempt to lock storage (pages lock by host OS)\n" \
" unlOCK - leave storage unlocked (pagable by host OS)\n" \
"\n" \
" (none) - display current mainsize value\n" \
"\n" \
" Note: Multipliers 'T', 'P', and 'E' are not available on 32bit machines\n"
#define manuf_cmd_desc "Set STSI manufacturer code"
#define maxcpu_cmd_desc "Set maxcpu parameter"
#define maxrates_cmd_desc "Display highest MIPS/SIOS rate or set interval"
#define maxrates_cmd_help \
\
"Format: \"maxrates [nnnn]\" where 'nnnn' is the desired reporting\n" \
"interval in minutes or 'midnight'. Acceptable values are from\n" \
"1 to 1440. The default is 1440 minutes (one day).\n" \
"The interval 'midnight' sets the interval to 1440 and aligns the\n" \
"start of the current interval to midnight.\n" \
"Entering \"maxrates\" by itself displays the current highest\n" \
"rates observed during the defined intervals.\n"
#define message_cmd_desc "Display message on console a la VM"
#define message_cmd_help \
\
"Format: \"message * text\". The 'text' field is variable in size.\n" \
"A 'VM' formatted similar to \"13:02:41 * MSG FROM HERCULES: hello\" is\n" \
"diplayed on the console panel as a result of the panel command\n" \
"'message * hello'.\n"
#define model_cmd_desc "Set/Query STSI model code"
#define model_cmd_help \
\
"Format:\n" \
"\n" \
" model [hardware [capacity [permanent [temporary]]]]\n" \
"\n" \
"where:\n" \
"\n" \
"<null> specifies a query of the current model code settings.\n" \
"\n" \
"hardware specifies the hardware model setting. Specifying an \"=\"\n" \
" resets the hardware model to \"EMULATOR\"; specifying an\n" \
" \"*\" leaves the current hardware model setting intact.\n" \
" The default hardware model is \"EMULATOR\".\n" \
"\n" \
"capacity specifies the capacity model setting. Specifying an \"=\"\n" \
" copies the current hardware model; specifying an \"*\" \n" \
" leaves the current capacity model setting intact. The\n" \
" default capacity model is \"EMULATOR\".\n" \
"\n" \
"permanent specifies the permanent model setting. Specifying an\n" \
" \"=\" copies the current capacity model; specifying an\n" \
" \"*\" leaves the current permanent model setting intact.\n" \
" The default permanent model is \"\" (null string).\n" \
"\n" \
"temporary specifies the temporary model setting. Specifying an\n" \
" \"=\" copies the current permanent model; specifying an\n" \
" \"*\" leaves the current temporary model setting intact.\n" \
" The default temporary model is \"\" (null string).\n"
#define modpath_cmd_desc "Set module load path"
#define mtapeinit_cmd_desc "Control tape initialization"
#define mtapeinit_cmd_help \
\
"Format: \"mounted_tape_reinit [disallow|disable | allow|enable]\"\n" \
"Specifies whether reinitialization of tape drive devices\n" \
"(via the devinit command, in order to mount a new tape)\n" \
"should be allowed if there is already a tape mounted on\n" \
"the drive. The current value is displayed if no operand is\n" \
"specified\n" \
"Specifying ALLOW or ENABLE indicates new tapes may be\n" \
"mounted (via 'devinit nnnn new-tape-filename') irrespective\n" \
"of whether or not there is already a tape mounted on the drive.\n" \
"This is the default state.\n" \
"Specifying DISALLOW or DISABLE prevents new tapes from being\n" \
"mounted if one is already mounted. When DISALLOW or DISABLE has\n" \
"been specified and a tape is already mounted on the drive, it\n" \
"must first be unmounted (via the command 'devinit nnnn *') before\n" \
"the new tape can be mounted. Otherwise the devinit attempt to\n" \
"mount the new tape is rejected.\n"
#define msg_cmd_desc "Alias for message"
#define msghld_cmd_desc "Display or set the timeout of held messages"
#define msghld_cmd_help \
\
"Format: \"msghld [value | info | clear]\".\n" \
"value: timeout value of held message in seconds\n" \
"info: displays the timeout value\n" \
"clear: releases the held messages\n"
#define msglevel_cmd_desc "Display/Set current Message Display output"
#define msglevel_cmd_help \
\
"Format: msglevel [on|off|text|time|debug|nodebug|verbose|terse|{device}]\n" \
" on Normal message display\n" \
" off No messages are displayed\n" \
" text Text portion only of message is display\n" \
" time Timestamp is prefixed to message\n" \
" debug Messages prefixed with source and linenumber\n" \
" nodebug Turn off debug\n" \
" tape Tape related messages\n" \
" dasd DASD related messages\n" \
" comm Communications related messages\n" \
" ur Unit Record related messages\n" \
" scsi SCSI related messages\n" \
" ctca CTCA, LCS related messages\n" \
" graf Graphics (3270) related messages\n" \
" thread Threading related messages\n" \
" channel Channel related messages\n" \
" verbose Display messages during configuration file processing\n" \
" terse Turn off verbose"
#define msglvl_cmd_desc "Alias for msglevel"
#define msgnoh_cmd_desc "Similar to \"message\" but no header"
#define mt_cmd_desc "Control magnetic tape operation"
#define mt_cmd_help \
\
"Format: \"mt device operation [ 1-9999 ]\".\n" \
" Operations below can be used on a valid tape device. The device\n" \
" must not have any I/O operation in process or pending.\n" \
" operation description\n" \
" rew rewind tape to the beginning\n" \
" asf n position tape at 'n' file (default = 1)\n" \
" fsf n forward space 'n' files (default = 1)\n" \
" bsf n backward space 'n' files (default = 1)\n" \
" fsr n forward space 'n' records (default = 1)\n" \
" bsr n backward space 'n' records (default = 1)\n" \
" wtm n write 'n' tapemarks (default = 1)\n" \
" dse data secure erase\n" \
" dvol1 display VOL1 header\n"
#define numcpu_cmd_desc "Set numcpu parameter"
#define numvec_cmd_desc "Set numvec parameter"
#define ostailor_cmd_desc "Tailor trace information for specific OS"
#define ostailor_cmd_help \
\
"Format: \"ostailor [quiet|os/390|z/os|vm|vse|linux|opensolaris|null]\".\n" \
"Specifies the intended operating system. The effect is to reduce\n" \
"control panel message traffic by selectively suppressing program\n" \
"check trace messages which are considered normal in the specified\n" \
"environment. The option 'quiet' suppresses all exception messages,\n" \
"whereas 'null' suppresses none of them. The other options suppress\n" \
"some messages and not others depending on the specified o/s. Prefix\n" \
"values with '+' to combine them with existing values or '-' to exclude\n" \
"them. SEE ALSO the 'pgmtrace' command which allows you to further fine\n" \
"tune the tracing of program interrupt exceptions.\n"
#define panrate_cmd_desc "Display or set rate at which console refreshes"
#define panrate_cmd_help \
\
"Format: \"panrate [nnn | fast | slow]\".\n" \
"Sets or displays the panel refresh rate.\n" \
"panrate nnn sets the refresh rate to nnn milliseconds.\n" \
"panrate fast sets the refresh rate to " QSTR(PANEL_REFRESH_RATE_FAST) " milliseconds.\n" \
"panrate slow sets the refresh rate to " QSTR(PANEL_REFRESH_RATE_SLOW) " milliseconds.\n" \
"If no operand is specified, panrate displays the current refresh rate.\n"
#define pantitle_cmd_desc "Display or set console title"
#define pantitle_cmd_help \
\
"Format: pantitle [\"title string\"]\n" \
" pantitle \"\"\n" \
"\n" \
"Sets or displays the optional console window title-bar\n" \
"string to be used in place of the default supplied by\n" \
"the windowing system. The value should be enclosed within\n" \
"double quotes if there are embedded blanks.\n" \
"\n" \
"An empty string (\"\") will remove the existing console title.\n" \
"\n" \
"The default console title will be a string consisting of\n" \
"LPARNAME - SYSTYPE * SYSNAME * SYSPLEX - System Status: color\n" \
"\n" \
"SYSTYPE, SYSNAME, and SYSPLEX are populated by the system call\n" \
"SCLP Control Program Identification. If a value is blank, then\n" \
"that field is not presented.\n" \
"\n" \
"System Status colors: GREEN - is every thing working correctly\n" \
" YELLOW - one or more CPUs are not running\n" \
" RED - one or more CPUs are in a disabled\n" \
" wait state\n"
#define pgmprdos_cmd_desc "Set LPP license setting"
#define pgmprdos_cmd_help \
"Format: \"pgmprdos restricted | licensed\"\n\n" \
"Note: It is YOUR responsibility to comply with the terms of the license for\n"\
" the operating system you intend to run on Hercules. If you specify\n" \
" LICENSED and run a licensed operating system in violation of that\n" \
" license, then don't come after the Hercules developers when the vendor\n"\
" sends his lawyers after you.\n"
#define pgmtrace_cmd_desc "Trace program interrupts"
#define pgmtrace_cmd_help \
\
"Format: \"pgmtrace [-]intcode\" where 'intcode' is any valid program\n" \
"interruption code in the range 0x01 to 0x40. Precede the interrupt\n" \
"code with a '-' to stop tracing of that particular program\n" \
"interruption.\n"
#define plant_cmd_desc "Set STSI plant code"
#define pr_cmd_desc "Display prefix register"
#define pscp_cmd_desc "Send prio message scp command"
#define pscp_cmd_help \
\
"Format: \"pscp [cmd]\". Send priority message cmd to scp in any cmdtgt mode.\n"
#define psw_cmd_desc "Display or alter program status word"
#define psw_cmd_help \
\
"Format: \"psw [operand ...]\" where 'operand ...' is one or more\n" \
"optional parameters which modify the contents of the Program Status\n" \
"Word:\n\n" \
" am=24|31|64 addressing mode\n" \
" as=ar|home|pri|sec address-space\n" \
" cc=n condition code (decimal 0 to 3)\n" \
" cmwp=x C/M/W/P bits (one hex digit)\n" \
" ia=xxx instruction address (1 to 16 hex digits)\n" \
" pk=n protection key (decimal 0 to 15)\n" \
" pm=x program mask (one hex digit)\n" \
" sm=xx system mask (2 hex digits)\n" \
"\n" \
"Enter \"psw\" by itself to display the current PSW without altering it.\n"
#define ptp_cmd_desc "Enable/Disable PTP debugging"
#define ptp_cmd_help \
\
"Format: \"ptp debug { on | off } [ [ <devnum> | ALL ] [ mask ] ]\".\n\n" \
"Enables/disables debug tracing for the PTP device group\n" \
"identified by <devnum>, or for all PTP device groups if\n" \
"<devnum> is not specified or specified as 'ALL'.\n"
#define ptt_cmd_desc "Set or display internal trace"
#define ptt_cmd_help \
\
"Format: \"ptt [options] [nnn]\"\n" \
"When specified with no operands, the ptt command displays the trace options\n" \
"and the contents of the internal trace table.\n" \
"When specified with operands, the ptt command sets the trace options and/or\n" \
"specifies which events are to be traced. If the last operand is numeric, it\n" \
"sets the size of the trace table and activates the trace.\n" \
"options:\n" \
" (no)control - control trace\n" \
" (no)error - error trace\n" \
" (no)inter - interlock failure trace\n" \
" (no)io - io trace\n" \
" (no)lock - lock trace buffer\n" \
" (no)logger - logger trace\n" \
" (no)prog - program interrupt trace\n" \
" (no)sie - sie trace\n" \
" (no)signal - signaling trace\n" \
" (no)threads - thread trace\n" \
" (no)timer - timer trace\n" \
" (no)tod - timestamp trace entries\n" \
" (no)wrap - wrap trace buffer\n" \
" to=nnn - trace buffer display timeout\n" \
" nnn - trace buffer size\n"
#define pwd_cmd_desc "Print working directory"
#define qcpuid_cmd_desc "Display cpuid"
#define qcpuid_cmd_help \
\
"Display cpuid and STSI results presented to the SCP\n"
#define qd_cmd_desc "Query dasd"
#define qpfkeys_cmd_desc "Display the current PF Key settings"
#define qpid_cmd_desc "Display Process ID of Hercules"
#define qports_cmd_desc "Display TCP/IP ports in use"
#define qproc_cmd_desc "Display processors type and utilization"
#define qstor_cmd_desc "Display main and expanded storage values"
#define quiet_cmd_desc "Toggle automatic refresh of panel display data"
#define quiet_cmd_help \
\
"'quiet' either disables automatic screen refreshing if it is\n" \
"currently enabled or enables it if it is currently disabled.\n" \
"When disabled you will no be able to see the response of any\n" \
"entered commands nor any messages issued by the system nor be\n" \
"able to scroll the display, etc. Basically all screen updating\n" \
"is disabled. Entering 'quiet' again re-enables screen updating.\n"
#define quit_ssd_cmd_desc "Terminate the emulator"
#define quit_ssd_cmd_help \
\
"Format: \"quit [force]\" Terminates the emulator. If the guest OS\n" \
" has enabled Signal Shutdown, then a\n" \
" signal shutdown request is sent to the\n" \
" guest OS and termination will begin\n" \
" after guest OS has shutdown.\n" \
" force This option will terminate the emulator\n" \
" immediately.\n"
#define quit_cmd_desc "Terminate the emulator"
#define quit_cmd_help \
\
"Format: \"quit [force]\" Terminates the emulator. The \"quit\"\n" \
" command will first check that all online\n" \
" CPUs are stopped. If any CPU is not in a\n" \
" stopped state, a message is displayed\n" \
" indicating the number of CPUs running. A\n" \
" second message follows that prompts for\n" \
" confirmation by entering a second \"quit\"\n" \
" command to start termination of the\n" \
" emulator.\n" \
" force This option will terminate hercules\n" \
" immediately.\n"
#define quitmout_cmd_desc "Set/Display the quit timeout value"
#define quitmout_cmd_help \
\
"Format: \"quitmount [n]\" Sets or displays the elasped time that\n" \
" a confirming quit/ssd command must be\n" \
" entered.\n" \
" n This is a value between 2 and 60,\n" \
" representing seconds.\n"
#define r_cmd_desc "Display or alter real storage"
#define r_cmd_help \
\
"Format: \"r addr[.len]\" or \"r addr[-addr2]\" to display real\n" \
"storage, or \"r addr=value\" to alter real storage, where 'value'\n" \
"is a hex string of up to 32 pairs of digits.\n"
#define restart_cmd_desc "Generate restart interrupt"
#define resume_cmd_desc "Resume hercules"
#if defined(ENABLE_OBJECT_REXX) || defined(ENABLE_REGINA_REXX)
#if defined(ENABLE_OBJECT_REXX) && defined(ENABLE_REGINA_REXX)
#define rexx_cmd_desc "Enable/Disable/display Rexx interpreter settings"