api.go

// THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT.

// Package firehose provides a client for Amazon Kinesis Firehose.
package firehose

import (
	"time"

	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/aws/request"
)

const opCreateDeliveryStream = "CreateDeliveryStream"

// CreateDeliveryStreamRequest generates a request for the CreateDeliveryStream operation.
func (c *Firehose) CreateDeliveryStreamRequest(input *CreateDeliveryStreamInput) (req *request.Request, output *CreateDeliveryStreamOutput) {
	op := &request.Operation{
		Name:       opCreateDeliveryStream,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &CreateDeliveryStreamInput{}
	}

	req = c.newRequest(op, input, output)
	output = &CreateDeliveryStreamOutput{}
	req.Data = output
	return
}

// Creates a delivery stream.
//
// CreateDeliveryStream is an asynchronous operation that immediately returns.
// The initial status of the delivery stream is CREATING. After the delivery
// stream is created, its status is ACTIVE and it now accepts data. Attempts
// to send data to a delivery stream that is not in the ACTIVE state cause an
// exception. To check the state of a delivery stream, use DescribeDeliveryStream.
//
// The name of a delivery stream identifies it. You can't have two delivery
// streams with the same name in the same region. Two delivery streams in different
// AWS accounts or different regions in the same AWS account can have the same
// name.
//
// By default, you can create up to 5 delivery streams per region.
//
// A delivery stream can only be configured with a single destination, Amazon
// S3 or Amazon Redshift. For correct CreateDeliveryStream request syntax, specify
// only one destination configuration parameter: either RedshiftDestinationConfiguration
// or S3DestinationConfiguration
//
// As part of S3DestinationConfiguration, optional values BufferingHints, EncryptionConfiguration,
// and CompressionFormat can be provided. By default, if no BufferingHints value
// is provided, Amazon Kinesis Firehose buffers data up to 5 MB or for 5 minutes,
// whichever condition is satisfied first. Note that BufferingHints is a hint,
// so there are some cases where the service cannot adhere to these conditions
// strictly; for example, record boundaries are such that the size is a little
// over or under the configured buffering size. By default, no encryption is
// performed. We strongly recommend that you enable encryption to ensure secure
// data storage in Amazon S3.
//
// A few notes about RedshiftDestinationConfiguration:
//
//  An Amazon Redshift destination requires an S3 bucket as intermediate location,
// as Amazon Kinesis Firehose first delivers data to S3 and then uses COPY syntax
// to load data into an Amazon Redshift table. This is specified in the RedshiftDestinationConfiguration.S3Configuration
// parameter element. The compression formats SNAPPY or ZIP cannot be specified
// in RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift
// COPY operation that reads from the S3 bucket doesn't support these compression
// formats. We strongly recommend that the username and password provided is
// used exclusively for Amazon Kinesis Firehose purposes, and that the permissions
// for the account are restricted for Amazon Redshift INSERT permissions.  Amazon
// Kinesis Firehose assumes the IAM role that is configured as part of destinations.
// The IAM role should allow the Amazon Kinesis Firehose principal to assume
// the role, and the role should have permissions that allows the service to
// deliver the data. For more information, see Amazon S3 Bucket Access (http://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3)
// in the Amazon Kinesis Firehose Developer Guide.
func (c *Firehose) CreateDeliveryStream(input *CreateDeliveryStreamInput) (*CreateDeliveryStreamOutput, error) {
	req, out := c.CreateDeliveryStreamRequest(input)
	err := req.Send()
	return out, err
}

const opDeleteDeliveryStream = "DeleteDeliveryStream"

// DeleteDeliveryStreamRequest generates a request for the DeleteDeliveryStream operation.
func (c *Firehose) DeleteDeliveryStreamRequest(input *DeleteDeliveryStreamInput) (req *request.Request, output *DeleteDeliveryStreamOutput) {
	op := &request.Operation{
		Name:       opDeleteDeliveryStream,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &DeleteDeliveryStreamInput{}
	}

	req = c.newRequest(op, input, output)
	output = &DeleteDeliveryStreamOutput{}
	req.Data = output
	return
}

// Deletes a delivery stream and its data.
//
// You can delete a delivery stream only if it is in ACTIVE or DELETING state,
// and not in the CREATING state. While the deletion request is in process,
// the delivery stream is in the DELETING state.
//
// To check the state of a delivery stream, use DescribeDeliveryStream.
//
// While the delivery stream is DELETING state, the service may continue to
// accept the records, but the service doesn't make any guarantees with respect
// to delivering the data. Therefore, as a best practice, you should first stop
// any applications that are sending records before deleting a delivery stream.
func (c *Firehose) DeleteDeliveryStream(input *DeleteDeliveryStreamInput) (*DeleteDeliveryStreamOutput, error) {
	req, out := c.DeleteDeliveryStreamRequest(input)
	err := req.Send()
	return out, err
}

const opDescribeDeliveryStream = "DescribeDeliveryStream"

// DescribeDeliveryStreamRequest generates a request for the DescribeDeliveryStream operation.
func (c *Firehose) DescribeDeliveryStreamRequest(input *DescribeDeliveryStreamInput) (req *request.Request, output *DescribeDeliveryStreamOutput) {
	op := &request.Operation{
		Name:       opDescribeDeliveryStream,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &DescribeDeliveryStreamInput{}
	}

	req = c.newRequest(op, input, output)
	output = &DescribeDeliveryStreamOutput{}
	req.Data = output
	return
}

// Describes the specified delivery stream and gets the status. For example,
// after your delivery stream is created, call DescribeDeliveryStream to see
// if the delivery stream is ACTIVE and therefore ready for data to be sent
// to it.
func (c *Firehose) DescribeDeliveryStream(input *DescribeDeliveryStreamInput) (*DescribeDeliveryStreamOutput, error) {
	req, out := c.DescribeDeliveryStreamRequest(input)
	err := req.Send()
	return out, err
}

const opListDeliveryStreams = "ListDeliveryStreams"

// ListDeliveryStreamsRequest generates a request for the ListDeliveryStreams operation.
func (c *Firehose) ListDeliveryStreamsRequest(input *ListDeliveryStreamsInput) (req *request.Request, output *ListDeliveryStreamsOutput) {
	op := &request.Operation{
		Name:       opListDeliveryStreams,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &ListDeliveryStreamsInput{}
	}

	req = c.newRequest(op, input, output)
	output = &ListDeliveryStreamsOutput{}
	req.Data = output
	return
}

// Lists your delivery streams.
//
// The number of delivery streams might be too large to return using a single
// call to ListDeliveryStreams. You can limit the number of delivery streams
// returned, using the Limit parameter. To determine whether there are more
// delivery streams to list, check the value of HasMoreDeliveryStreams in the
// output. If there are more delivery streams to list, you can request them
// by specifying the name of the last delivery stream returned in the call in
// the ExclusiveStartDeliveryStreamName parameter of a subsequent call.
func (c *Firehose) ListDeliveryStreams(input *ListDeliveryStreamsInput) (*ListDeliveryStreamsOutput, error) {
	req, out := c.ListDeliveryStreamsRequest(input)
	err := req.Send()
	return out, err
}

const opPutRecord = "PutRecord"

// PutRecordRequest generates a request for the PutRecord operation.
func (c *Firehose) PutRecordRequest(input *PutRecordInput) (req *request.Request, output *PutRecordOutput) {
	op := &request.Operation{
		Name:       opPutRecord,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &PutRecordInput{}
	}

	req = c.newRequest(op, input, output)
	output = &PutRecordOutput{}
	req.Data = output
	return
}

// Writes a single data record into an Amazon Kinesis Firehose delivery stream.
// To write multiple data records into a delivery stream, use PutRecordBatch.
// Applications using these operations are referred to as producers.
//
// By default, each delivery stream can take in up to 2,000 transactions per
// second, 5,000 records per second, or 5 MB per second. Note that if you use
// PutRecord and PutRecordBatch, the limits are an aggregate across these two
// operations for each delivery stream. For more information about limits and
// how to request an increase, see Amazon Kinesis Firehose Limits (http://docs.aws.amazon.com/firehose/latest/dev/limits.html).
//
// You must specify the name of the delivery stream and the data record when
// using PutRecord. The data record consists of a data blob that can be up to
// 1,000 KB in size, and any kind of data, for example, a segment from a log
// file, geographic location data, web site clickstream data, etc.
//
// Amazon Kinesis Firehose buffers records before delivering them to the destination.
// To disambiguate the data blobs at the destination, a common solution is to
// use delimiters in the data, such as a newline (\n) or some other character
// unique within the data. This allows the consumer application(s) to parse
// individual data items when reading the data from the destination.
//
// Amazon Kinesis Firehose does not maintain data record ordering. If the destination
// data needs to be re-ordered by the consumer application, the producer should
// include some form of sequence number in each data record.
//
// The PutRecord operation returns a RecordId, which is a unique string assigned
// to each record. Producer applications can use this ID for purposes such as
// auditability and investigation.
//
// If the PutRecord operation throws a ServiceUnavailableException, back off
// and retry. If the exception persists, it is possible that the throughput
// limits have been exceeded for the delivery stream.
//
// Data records sent to Amazon Kinesis Firehose are stored for 24 hours from
// the time they are added to a delivery stream as it attempts to send the records
// to the destination. If the destination is unreachable for more than 24 hours,
// the data is no longer available.
func (c *Firehose) PutRecord(input *PutRecordInput) (*PutRecordOutput, error) {
	req, out := c.PutRecordRequest(input)
	err := req.Send()
	return out, err
}

const opPutRecordBatch = "PutRecordBatch"

// PutRecordBatchRequest generates a request for the PutRecordBatch operation.
func (c *Firehose) PutRecordBatchRequest(input *PutRecordBatchInput) (req *request.Request, output *PutRecordBatchOutput) {
	op := &request.Operation{
		Name:       opPutRecordBatch,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &PutRecordBatchInput{}
	}

	req = c.newRequest(op, input, output)
	output = &PutRecordBatchOutput{}
	req.Data = output
	return
}

// Writes multiple data records into a delivery stream in a single call, which
// can achieve higher throughput per producer than when writing single records.
// To write single data records into a delivery stream, use PutRecord. Applications
// using these operations are referred to as producers.
//
// Each PutRecordBatch request supports up to 500 records. Each record in the
// request can be as large as 1,000 KB (before 64-bit encoding), up to a limit
// of 4 MB for the entire request. By default, each delivery stream can take
// in up to 2,000 transactions per second, 5,000 records per second, or 5 MB
// per second. Note that if you use PutRecord and PutRecordBatch, the limits
// are an aggregate across these two operations for each delivery stream. For
// more information about limits and how to request an increase, see Amazon
// Kinesis Firehose Limits (http://docs.aws.amazon.com/firehose/latest/dev/limits.html).
//
// You must specify the name of the delivery stream and the data record when
// using PutRecord. The data record consists of a data blob that can be up to
// 1,000 KB in size, and any kind of data, for example, a segment from a log
// file, geographic location data, web site clickstream data, and so on.
//
// Amazon Kinesis Firehose buffers records before delivering them to the destination.
// To disambiguate the data blobs at the destination, a common solution is to
// use delimiters in the data, such as a newline (\n) or some other character
// unique within the data. This allows the consumer application(s) to parse
// individual data items when reading the data from the destination.
//
// The PutRecordBatch response includes a count of any failed records, FailedPutCount,
// and an array of responses, RequestResponses. The FailedPutCount value is
// a count of records that failed. Each entry in the RequestResponses array
// gives additional information of the processed record. Each entry in RequestResponses
// directly correlates with a record in the request array using the same ordering,
// from the top to the bottom of the request and response. RequestResponses
// always includes the same number of records as the request array. RequestResponses
// both successfully and unsuccessfully processed records. Amazon Kinesis Firehose
// attempts to process all records in each PutRecordBatch request. A single
// record failure does not stop the processing of subsequent records.
//
// A successfully processed record includes a RecordId value, which is a unique
// value identified for the record. An unsuccessfully processed record includes
// ErrorCode and ErrorMessage values. ErrorCode reflects the type of error and
// is one of the following values: ServiceUnavailable or InternalFailure. ErrorMessage
// provides more detailed information about the error.
//
// If FailedPutCount is greater than 0 (zero), retry the request. A retry of
// the entire batch of records is possible; however, we strongly recommend that
// you inspect the entire response and resend only those records that failed
// processing. This minimizes duplicate records and also reduces the total bytes
// sent (and corresponding charges).
//
// If the PutRecordBatch operation throws a ServiceUnavailableException, back
// off and retry. If the exception persists, it is possible that the throughput
// limits have been exceeded for the delivery stream.
//
// Data records sent to Amazon Kinesis Firehose are stored for 24 hours from
// the time they are added to a delivery stream as it attempts to send the records
// to the destination. If the destination is unreachable for more than 24 hours,
// the data is no longer available.
func (c *Firehose) PutRecordBatch(input *PutRecordBatchInput) (*PutRecordBatchOutput, error) {
	req, out := c.PutRecordBatchRequest(input)
	err := req.Send()
	return out, err
}

const opUpdateDestination = "UpdateDestination"

// UpdateDestinationRequest generates a request for the UpdateDestination operation.
func (c *Firehose) UpdateDestinationRequest(input *UpdateDestinationInput) (req *request.Request, output *UpdateDestinationOutput) {
	op := &request.Operation{
		Name:       opUpdateDestination,
		HTTPMethod: "POST",
		HTTPPath:   "/",
	}

	if input == nil {
		input = &UpdateDestinationInput{}
	}

	req = c.newRequest(op, input, output)
	output = &UpdateDestinationOutput{}
	req.Data = output
	return
}

// Updates the specified destination of the specified delivery stream.
//
// This operation can be used to change the destination type (for example,
// to replace the Amazon S3 destination with Amazon Redshift) or change the
// parameters associated with a given destination (for example, to change the
// bucket name of the Amazon S3 destination). The update may not occur immediately.
// The target delivery stream remains active while the configurations are updated,
// so data writes to the delivery stream can continue during this process. The
// updated configurations are normally effective within a few minutes.
//
// If the destination type is the same, Amazon Kinesis Firehose merges the
// configuration parameters specified in the UpdateDestination request with
// the destination configuration that already exists on the delivery stream.
// If any of the parameters are not specified in the update request, then the
// existing configuration parameters are retained. For example, in the Amazon
// S3 destination, if EncryptionConfiguration is not specified then the existing
// EncryptionConfiguration is maintained on the destination.
//
// If the destination type is not the same, for example, changing the destination
// from Amazon S3 to Amazon Redshift, Amazon Kinesis Firehose does not merge
// any parameters. In this case, all parameters must be specified.
//
// Amazon Kinesis Firehose uses the CurrentDeliveryStreamVersionId to avoid
// race conditions and conflicting merges. This is a required field in every
// request and the service only updates the configuration if the existing configuration
// matches the VersionId. After the update is applied successfully, the VersionId
// is updated, which can be retrieved with the DescribeDeliveryStream operation.
// The new VersionId should be uses to set CurrentDeliveryStreamVersionId in
// the next UpdateDestination operation.
func (c *Firehose) UpdateDestination(input *UpdateDestinationInput) (*UpdateDestinationOutput, error) {
	req, out := c.UpdateDestinationRequest(input)
	err := req.Send()
	return out, err
}

// Describes the buffering to perform before delivering data to the destination.
type BufferingHints struct {
	_ struct{} `type:"structure"`

	// Buffer incoming data for the specified period of time, in seconds, before
	// delivering it to the destination. The default value is 300.
	IntervalInSeconds *int64 `min:"60" type:"integer"`

	// Buffer incoming data to the specified size, in MBs, before delivering it
	// to the destination. The default value is 5.
	//
	// We recommend setting SizeInMBs to a value greater than the amount of data
	// you typically ingest into the delivery stream in 10 seconds. For example,
	// if you typically ingest data at 1 MB/sec set SizeInMBs to be 10 MB or higher.
	SizeInMBs *int64 `min:"1" type:"integer"`
}

// String returns the string representation
func (s BufferingHints) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s BufferingHints) GoString() string {
	return s.String()
}

// Describes a COPY command for Amazon Redshift.
type CopyCommand struct {
	_ struct{} `type:"structure"`

	// Optional parameters to use with the Amazon Redshift COPY command. For more
	// information, see the "Optional Parameters" section of Amazon Redshift COPY
	// command (http://docs.aws.amazon.com/redshift/latest/dg/r_COPY.html). Some
	// possible examples that would apply to Amazon Kinesis Firehose are as follows.
	//
	// delimiter '\t' lzop; - fields are delimited with "\t" (TAB character) and
	// compressed using lzop.
	//
	// delimiter '| - fields are delimited with "|" (this is the default delimiter).
	//
	// delimiter '|' escape - the delimiter should be escaped.
	//
	// fixedwidth 'venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6'
	// - fields are fixed width in the source, with each width specified after every
	// column in the table.
	//
	//  JSON 's3://mybucket/jsonpaths.txt' - data is in JSON format, and the path
	// specified is the format of the data.
	//
	// For more examples, see and Amazon Redshift COPY command exmaples (http://docs.aws.amazon.com/redshift/latest/dg/r_COPY_command_examples.html).
	CopyOptions *string `type:"string"`

	// A comma-separated list of column names.
	DataTableColumns *string `type:"string"`

	// The name of the target table. The table must already exist in the database.
	DataTableName *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s CopyCommand) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s CopyCommand) GoString() string {
	return s.String()
}

// Contains the parameters for CreateDeliveryStream.
type CreateDeliveryStreamInput struct {
	_ struct{} `type:"structure"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`

	// The destination in Amazon Redshift. This value cannot be specified if Amazon
	// S3 is the desired destination (see restrictions listed above).
	RedshiftDestinationConfiguration *RedshiftDestinationConfiguration `type:"structure"`

	// The destination in Amazon S3. This value must be specified if RedshiftDestinationConfiguration
	// is specified (see restrictions listed above).
	S3DestinationConfiguration *S3DestinationConfiguration `type:"structure"`
}

// String returns the string representation
func (s CreateDeliveryStreamInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s CreateDeliveryStreamInput) GoString() string {
	return s.String()
}

// Contains the output of CreateDeliveryStream.
type CreateDeliveryStreamOutput struct {
	_ struct{} `type:"structure"`

	// The ARN of the delivery stream.
	DeliveryStreamARN *string `type:"string"`
}

// String returns the string representation
func (s CreateDeliveryStreamOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s CreateDeliveryStreamOutput) GoString() string {
	return s.String()
}

// Contains the parameters for DeleteDeliveryStream.
type DeleteDeliveryStreamInput struct {
	_ struct{} `type:"structure"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s DeleteDeliveryStreamInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteDeliveryStreamInput) GoString() string {
	return s.String()
}

// Contains the output of DeleteDeliveryStream.
type DeleteDeliveryStreamOutput struct {
	_ struct{} `type:"structure"`
}

// String returns the string representation
func (s DeleteDeliveryStreamOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeleteDeliveryStreamOutput) GoString() string {
	return s.String()
}

// Contains information about a delivery stream.
type DeliveryStreamDescription struct {
	_ struct{} `type:"structure"`

	// The date and time that the delivery stream was created.
	CreateTimestamp *time.Time `type:"timestamp" timestampFormat:"unix"`

	// The Amazon Resource Name (ARN) of the delivery stream.
	DeliveryStreamARN *string `type:"string" required:"true"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`

	// The status of the delivery stream.
	DeliveryStreamStatus *string `type:"string" required:"true" enum:"DeliveryStreamStatus"`

	// The destinations.
	Destinations []*DestinationDescription `type:"list" required:"true"`

	// Indicates whether there are more destinations available to list.
	HasMoreDestinations *bool `type:"boolean" required:"true"`

	// The date and time that the delivery stream was last updated.
	LastUpdateTimestamp *time.Time `type:"timestamp" timestampFormat:"unix"`

	// Used when calling the UpdateDestination operation. Each time the destination
	// is updated for the delivery stream, the VersionId is changed, and the current
	// VersionId is required when updating the destination. This is so that the
	// service knows it is applying the changes to the correct version of the delivery
	// stream.
	VersionId *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s DeliveryStreamDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DeliveryStreamDescription) GoString() string {
	return s.String()
}

// Contains the parameters for DescribeDeliveryStream.
type DescribeDeliveryStreamInput struct {
	_ struct{} `type:"structure"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`

	// Specifies the destination ID to start returning the destination information.
	// Currently Amazon Kinesis Firehose supports one destination per delivery stream.
	ExclusiveStartDestinationId *string `min:"1" type:"string"`

	// The limit on the number of destinations to return. Currently, you can have
	// one destination per delivery stream.
	Limit *int64 `min:"1" type:"integer"`
}

// String returns the string representation
func (s DescribeDeliveryStreamInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DescribeDeliveryStreamInput) GoString() string {
	return s.String()
}

// Contains the output of DescribeDeliveryStream.
type DescribeDeliveryStreamOutput struct {
	_ struct{} `type:"structure"`

	// Information about the delivery stream.
	DeliveryStreamDescription *DeliveryStreamDescription `type:"structure" required:"true"`
}

// String returns the string representation
func (s DescribeDeliveryStreamOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DescribeDeliveryStreamOutput) GoString() string {
	return s.String()
}

// Describes the destination for a delivery stream.
type DestinationDescription struct {
	_ struct{} `type:"structure"`

	// The ID of the destination.
	DestinationId *string `min:"1" type:"string" required:"true"`

	// The destination in Amazon Redshift.
	RedshiftDestinationDescription *RedshiftDestinationDescription `type:"structure"`

	// The Amazon S3 destination.
	S3DestinationDescription *S3DestinationDescription `type:"structure"`
}

// String returns the string representation
func (s DestinationDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s DestinationDescription) GoString() string {
	return s.String()
}

// Describes the encryption for a destination in Amazon S3.
type EncryptionConfiguration struct {
	_ struct{} `type:"structure"`

	// The encryption key.
	KMSEncryptionConfig *KMSEncryptionConfig `type:"structure"`

	// Specifically override existing encryption information to ensure no encryption
	// is used.
	NoEncryptionConfig *string `type:"string" enum:"NoEncryptionConfig"`
}

// String returns the string representation
func (s EncryptionConfiguration) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s EncryptionConfiguration) GoString() string {
	return s.String()
}

// Describes an encryption key for a destination in Amazon S3.
type KMSEncryptionConfig struct {
	_ struct{} `type:"structure"`

	// The ARN of the encryption key. Must belong to the same region as the destination
	// Amazon S3 bucket.
	AWSKMSKeyARN *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s KMSEncryptionConfig) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s KMSEncryptionConfig) GoString() string {
	return s.String()
}

// Contains the parameters for ListDeliveryStreams.
type ListDeliveryStreamsInput struct {
	_ struct{} `type:"structure"`

	// The name of the delivery stream to start the list with.
	ExclusiveStartDeliveryStreamName *string `min:"1" type:"string"`

	// The maximum number of delivery streams to list.
	Limit *int64 `min:"1" type:"integer"`
}

// String returns the string representation
func (s ListDeliveryStreamsInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ListDeliveryStreamsInput) GoString() string {
	return s.String()
}

// Contains the output of ListDeliveryStreams.
type ListDeliveryStreamsOutput struct {
	_ struct{} `type:"structure"`

	// The names of the delivery streams.
	DeliveryStreamNames []*string `type:"list" required:"true"`

	// Indicates whether there are more delivery streams available to list.
	HasMoreDeliveryStreams *bool `type:"boolean" required:"true"`
}

// String returns the string representation
func (s ListDeliveryStreamsOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s ListDeliveryStreamsOutput) GoString() string {
	return s.String()
}

// Contains the parameters for PutRecordBatch.
type PutRecordBatchInput struct {
	_ struct{} `type:"structure"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`

	// One or more records.
	Records []*Record `min:"1" type:"list" required:"true"`
}

// String returns the string representation
func (s PutRecordBatchInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutRecordBatchInput) GoString() string {
	return s.String()
}

// Contains the output of PutRecordBatch.
type PutRecordBatchOutput struct {
	_ struct{} `type:"structure"`

	// The number of unsuccessfully written records.
	FailedPutCount *int64 `type:"integer" required:"true"`

	// The results for the individual records. The index of each element matches
	// the same index in which records were sent.
	RequestResponses []*PutRecordBatchResponseEntry `min:"1" type:"list" required:"true"`
}

// String returns the string representation
func (s PutRecordBatchOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutRecordBatchOutput) GoString() string {
	return s.String()
}

// Contains the result for an individual record from a PutRecordBatch request.
// If the record is successfully added to your delivery stream, it receives
// a record ID. If the record fails to be added to your delivery stream, the
// result includes an error code and an error message.
type PutRecordBatchResponseEntry struct {
	_ struct{} `type:"structure"`

	// The error code for an individual record result.
	ErrorCode *string `type:"string"`

	// The error message for an individual record result.
	ErrorMessage *string `type:"string"`

	// The ID of the record.
	RecordId *string `min:"1" type:"string"`
}

// String returns the string representation
func (s PutRecordBatchResponseEntry) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutRecordBatchResponseEntry) GoString() string {
	return s.String()
}

// Contains the parameters for PutRecord.
type PutRecordInput struct {
	_ struct{} `type:"structure"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`

	// The record.
	Record *Record `type:"structure" required:"true"`
}

// String returns the string representation
func (s PutRecordInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutRecordInput) GoString() string {
	return s.String()
}

// Contains the output of PutRecord.
type PutRecordOutput struct {
	_ struct{} `type:"structure"`

	// The ID of the record.
	RecordId *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s PutRecordOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s PutRecordOutput) GoString() string {
	return s.String()
}

// The unit of data in a delivery stream.
type Record struct {
	_ struct{} `type:"structure"`

	// The data blob, which is base64-encoded when the blob is serialized. The maximum
	// size of the data blob, before base64-encoding, is 1,000 KB.
	Data []byte `type:"blob" required:"true"`
}

// String returns the string representation
func (s Record) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s Record) GoString() string {
	return s.String()
}

// Describes the configuration of a destination in Amazon Redshift.
type RedshiftDestinationConfiguration struct {
	_ struct{} `type:"structure"`

	// The database connection string.
	ClusterJDBCURL *string `min:"1" type:"string" required:"true"`

	// The COPY command.
	CopyCommand *CopyCommand `type:"structure" required:"true"`

	// The user password.
	Password *string `min:"6" type:"string" required:"true"`

	// The ARN of the AWS credentials.
	RoleARN *string `min:"1" type:"string" required:"true"`

	// The S3 configuration for the intermediate location from which Amazon Redshift
	// obtains data. Restrictions are described in the topic for CreateDeliveryStream.
	//
	// The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationConfiguration.S3Configuration
	// because the Amazon Redshift COPY operation that reads from the S3 bucket
	// doesn't support these compression formats.
	S3Configuration *S3DestinationConfiguration `type:"structure" required:"true"`

	// The name of the user.
	Username *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s RedshiftDestinationConfiguration) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s RedshiftDestinationConfiguration) GoString() string {
	return s.String()
}

// Describes a destination in Amazon Redshift.
type RedshiftDestinationDescription struct {
	_ struct{} `type:"structure"`

	// The database connection string.
	ClusterJDBCURL *string `min:"1" type:"string" required:"true"`

	// The COPY command.
	CopyCommand *CopyCommand `type:"structure" required:"true"`

	// The ARN of the AWS credentials.
	RoleARN *string `min:"1" type:"string" required:"true"`

	// The Amazon S3 destination.
	S3DestinationDescription *S3DestinationDescription `type:"structure" required:"true"`

	// The name of the user.
	Username *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s RedshiftDestinationDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s RedshiftDestinationDescription) GoString() string {
	return s.String()
}

// Describes an update for a destination in Amazon Redshift.
type RedshiftDestinationUpdate struct {
	_ struct{} `type:"structure"`

	// The database connection string.
	ClusterJDBCURL *string `min:"1" type:"string"`

	// The COPY command.
	CopyCommand *CopyCommand `type:"structure"`

	// The user password.
	Password *string `min:"6" type:"string"`

	// The ARN of the AWS credentials.
	RoleARN *string `min:"1" type:"string"`

	// The Amazon S3 destination.
	//
	// The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationUpdate.S3Update
	// because the Amazon Redshift COPY operation that reads from the S3 bucket
	// doesn't support these compression formats.
	S3Update *S3DestinationUpdate `type:"structure"`

	// The name of the user.
	Username *string `min:"1" type:"string"`
}

// String returns the string representation
func (s RedshiftDestinationUpdate) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s RedshiftDestinationUpdate) GoString() string {
	return s.String()
}

// Describes the configuration of a destination in Amazon S3.
type S3DestinationConfiguration struct {
	_ struct{} `type:"structure"`

	// The ARN of the S3 bucket.
	BucketARN *string `min:"1" type:"string" required:"true"`

	// The buffering option. If no value is specified, BufferingHints object default
	// values are used.
	BufferingHints *BufferingHints `type:"structure"`

	// The compression format. If no value is specified, the default is UNCOMPRESSED.
	//
	// The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift
	// destinations because they are not supported by the Amazon Redshift COPY operation
	// that reads from the S3 bucket.
	CompressionFormat *string `type:"string" enum:"CompressionFormat"`

	// The encryption configuration. If no value is specified, the default is no
	// encryption.
	EncryptionConfiguration *EncryptionConfiguration `type:"structure"`

	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
	// S3 files. You can specify an extra prefix to be added in front of the time
	// format prefix. Note that if the prefix ends with a slash, it appears as a
	// folder in the S3 bucket. For more information, see Amazon S3 Object Name
	// Format (http://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html)
	// in the guide-fh-dev (http://docs.aws.amazon.com/firehose/latest/dev/).
	Prefix *string `type:"string"`

	// The ARN of the AWS credentials.
	RoleARN *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s S3DestinationConfiguration) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s S3DestinationConfiguration) GoString() string {
	return s.String()
}

// Describes a destination in Amazon S3.
type S3DestinationDescription struct {
	_ struct{} `type:"structure"`

	// The ARN of the S3 bucket.
	BucketARN *string `min:"1" type:"string" required:"true"`

	// The buffering option. If no value is specified, BufferingHints object default
	// values are used.
	BufferingHints *BufferingHints `type:"structure" required:"true"`

	// The compression format. If no value is specified, the default is NOCOMPRESSION.
	CompressionFormat *string `type:"string" required:"true" enum:"CompressionFormat"`

	// The encryption configuration. If no value is specified, the default is no
	// encryption.
	EncryptionConfiguration *EncryptionConfiguration `type:"structure" required:"true"`

	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
	// S3 files. You can specify an extra prefix to be added in front of the time
	// format prefix. Note that if the prefix ends with a slash, it appears as a
	// folder in the S3 bucket. For more information, see Amazon S3 Object Name
	// Format (http://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html)
	// in the guide-fh-dev (http://docs.aws.amazon.com/firehose/latest/dev/).
	Prefix *string `type:"string"`

	// The ARN of the AWS credentials.
	RoleARN *string `min:"1" type:"string" required:"true"`
}

// String returns the string representation
func (s S3DestinationDescription) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s S3DestinationDescription) GoString() string {
	return s.String()
}

// Describes an update for a destination in Amazon S3.
type S3DestinationUpdate struct {
	_ struct{} `type:"structure"`

	// The ARN of the S3 bucket.
	BucketARN *string `min:"1" type:"string"`

	// The buffering option. If no value is specified, BufferingHints object default
	// values are used.
	BufferingHints *BufferingHints `type:"structure"`

	// The compression format. If no value is specified, the default is NOCOMPRESSION.
	//
	// The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift
	// destinations because they are not supported by the Amazon Redshift COPY operation
	// that reads from the S3 bucket.
	CompressionFormat *string `type:"string" enum:"CompressionFormat"`

	// The encryption configuration. If no value is specified, the default is no
	// encryption.
	EncryptionConfiguration *EncryptionConfiguration `type:"structure"`

	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
	// S3 files. You can specify an extra prefix to be added in front of the time
	// format prefix. Note that if the prefix ends with a slash, it appears as a
	// folder in the S3 bucket. For more information, see Amazon S3 Object Name
	// Format (http://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html)
	// in the guide-fh-dev (http://docs.aws.amazon.com/firehose/latest/dev/).
	Prefix *string `type:"string"`

	// The ARN of the AWS credentials.
	RoleARN *string `min:"1" type:"string"`
}

// String returns the string representation
func (s S3DestinationUpdate) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s S3DestinationUpdate) GoString() string {
	return s.String()
}

// Contains the parameters for UpdateDestination.
type UpdateDestinationInput struct {
	_ struct{} `type:"structure"`

	// Obtain this value from the VersionId result of the DeliveryStreamDescription
	// operation. This value is required, and helps the service to perform conditional
	// operations. For example, if there is a interleaving update and this value
	// is null, then the update destination fails. After the update is successful,
	// the VersionId value is updated. The service then performs a merge of the
	// old configuration with the new configuration.
	CurrentDeliveryStreamVersionId *string `min:"1" type:"string" required:"true"`

	// The name of the delivery stream.
	DeliveryStreamName *string `min:"1" type:"string" required:"true"`

	// The ID of the destination.
	DestinationId *string `min:"1" type:"string" required:"true"`

	// Describes an update for a destination in Amazon Redshift.
	RedshiftDestinationUpdate *RedshiftDestinationUpdate `type:"structure"`

	// Describes an update for a destination in Amazon S3.
	S3DestinationUpdate *S3DestinationUpdate `type:"structure"`
}

// String returns the string representation
func (s UpdateDestinationInput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateDestinationInput) GoString() string {
	return s.String()
}

// Contains the output of UpdateDestination.
type UpdateDestinationOutput struct {
	_ struct{} `type:"structure"`
}

// String returns the string representation
func (s UpdateDestinationOutput) String() string {
	return awsutil.Prettify(s)
}

// GoString returns the string representation
func (s UpdateDestinationOutput) GoString() string {
	return s.String()
}

const (
	// @enum CompressionFormat
	CompressionFormatUncompressed = "UNCOMPRESSED"
	// @enum CompressionFormat
	CompressionFormatGzip = "GZIP"
	// @enum CompressionFormat
	CompressionFormatZip = "ZIP"
	// @enum CompressionFormat
	CompressionFormatSnappy = "Snappy"
)

const (
	// @enum DeliveryStreamStatus
	DeliveryStreamStatusCreating = "CREATING"
	// @enum DeliveryStreamStatus
	DeliveryStreamStatusDeleting = "DELETING"
	// @enum DeliveryStreamStatus
	DeliveryStreamStatusActive = "ACTIVE"
)

const (
	// @enum NoEncryptionConfig
	NoEncryptionConfigNoEncryption = "NoEncryption"
)