forked from openwrt/openwrt
/
075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
152 lines (136 loc) · 4.8 KB
/
075-v5.13-0002-net-dsa-bcm_sf2-setup-BCM4908-internal-crossbar.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
From a9349f08ec6c1251d41ef167d27a15cc39bc5b97 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 12 Mar 2021 11:41:08 +0100
Subject: [PATCH] net: dsa: bcm_sf2: setup BCM4908 internal crossbar
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
On some SoCs (e.g. BCM4908, BCM631[345]8) SF2 has an integrated
crossbar. It allows connecting its selected external ports to internal
ports. It's used by vendors to handle custom Ethernet setups.
BCM4908 has following 3x2 crossbar. On Asus GT-AC5300 rgmii is used for
connecting external BCM53134S switch. GPHY4 is usually used for WAN
port. More fancy devices use SerDes for 2.5 Gbps Ethernet.
┌──────────┐
SerDes ─── 0 ─┤ │
│ 3x2 ├─ 0 ─── switch port 7
GPHY4 ─── 1 ─┤ │
│ crossbar ├─ 1 ─── runner (accelerator)
rgmii ─── 2 ─┤ │
└──────────┘
Use setup data based on DT info to configure BCM4908's switch port 7.
Right now only GPHY and rgmii variants are supported. Handling SerDes
can be implemented later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/bcm_sf2.c | 45 ++++++++++++++++++++++++++++++++++
drivers/net/dsa/bcm_sf2.h | 1 +
drivers/net/dsa/bcm_sf2_regs.h | 7 ++++++
3 files changed, 53 insertions(+)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -435,6 +435,44 @@ static int bcm_sf2_sw_rst(struct bcm_sf2
return 0;
}
+static void bcm_sf2_crossbar_setup(struct bcm_sf2_priv *priv)
+{
+ struct device *dev = priv->dev->ds->dev;
+ int shift;
+ u32 mask;
+ u32 reg;
+ int i;
+
+ mask = BIT(priv->num_crossbar_int_ports) - 1;
+
+ reg = reg_readl(priv, REG_CROSSBAR);
+ switch (priv->type) {
+ case BCM4908_DEVICE_ID:
+ shift = CROSSBAR_BCM4908_INT_P7 * priv->num_crossbar_int_ports;
+ reg &= ~(mask << shift);
+ if (0) /* FIXME */
+ reg |= CROSSBAR_BCM4908_EXT_SERDES << shift;
+ else if (priv->int_phy_mask & BIT(7))
+ reg |= CROSSBAR_BCM4908_EXT_GPHY4 << shift;
+ else if (phy_interface_mode_is_rgmii(priv->port_sts[7].mode))
+ reg |= CROSSBAR_BCM4908_EXT_RGMII << shift;
+ else if (WARN(1, "Invalid port mode\n"))
+ return;
+ break;
+ default:
+ return;
+ }
+ reg_writel(priv, reg, REG_CROSSBAR);
+
+ reg = reg_readl(priv, REG_CROSSBAR);
+ for (i = 0; i < priv->num_crossbar_int_ports; i++) {
+ shift = i * priv->num_crossbar_int_ports;
+
+ dev_dbg(dev, "crossbar int port #%d - ext port #%d\n", i,
+ (reg >> shift) & mask);
+ }
+}
+
static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
{
intrl2_0_mask_set(priv, 0xffffffff);
@@ -880,6 +918,8 @@ static int bcm_sf2_sw_resume(struct dsa_
return ret;
}
+ bcm_sf2_crossbar_setup(priv);
+
ret = bcm_sf2_cfp_resume(ds);
if (ret)
return ret;
@@ -1151,6 +1191,7 @@ struct bcm_sf2_of_data {
const u16 *reg_offsets;
unsigned int core_reg_align;
unsigned int num_cfp_rules;
+ unsigned int num_crossbar_int_ports;
};
static const u16 bcm_sf2_4908_reg_offsets[] = {
@@ -1175,6 +1216,7 @@ static const struct bcm_sf2_of_data bcm_
.core_reg_align = 0,
.reg_offsets = bcm_sf2_4908_reg_offsets,
.num_cfp_rules = 0, /* FIXME */
+ .num_crossbar_int_ports = 2,
};
/* Register offsets for the SWITCH_REG_* block */
@@ -1285,6 +1327,7 @@ static int bcm_sf2_sw_probe(struct platf
priv->reg_offsets = data->reg_offsets;
priv->core_reg_align = data->core_reg_align;
priv->num_cfp_rules = data->num_cfp_rules;
+ priv->num_crossbar_int_ports = data->num_crossbar_int_ports;
priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev,
"switch");
@@ -1358,6 +1401,8 @@ static int bcm_sf2_sw_probe(struct platf
goto out_clk_mdiv;
}
+ bcm_sf2_crossbar_setup(priv);
+
bcm_sf2_gphy_enable_set(priv->dev->ds, true);
ret = bcm_sf2_mdio_register(ds);
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -74,6 +74,7 @@ struct bcm_sf2_priv {
const u16 *reg_offsets;
unsigned int core_reg_align;
unsigned int num_cfp_rules;
+ unsigned int num_crossbar_int_ports;
/* spinlock protecting access to the indirect registers */
spinlock_t indir_lock;
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -48,6 +48,13 @@ enum bcm_sf2_reg_offs {
#define PHY_PHYAD_SHIFT 8
#define PHY_PHYAD_MASK 0x1F
+/* Relative to REG_CROSSBAR */
+#define CROSSBAR_BCM4908_INT_P7 0
+#define CROSSBAR_BCM4908_INT_RUNNER 1
+#define CROSSBAR_BCM4908_EXT_SERDES 0
+#define CROSSBAR_BCM4908_EXT_GPHY4 1
+#define CROSSBAR_BCM4908_EXT_RGMII 2
+
#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_CNTRL + (x))
/* Relative to REG_RGMII_CNTRL */