950-0652-overlays-Add-vl805-overlay.patch

From 2f1c8eedc108d458fb2566ec582cbd7c45fc280b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 12 Jan 2022 12:48:53 +0000
Subject: [PATCH] overlays: Add vl805 overlay

With the automatic VL805 support being removed from the standard
CM4 dtb (since most CM4 carriers don't have a VL805), retain support
on those that do by creating a "vl805" overlay that restores the
deleted "usb@0,0" node.

The "vl805" overlay will be loaded automatically (after an upcoming
firmware update) on CM4 boards where the EEPROM config includes the
setting VL805=1.

See: https://forums.raspberrypi.com/viewtopic.php?t=326088

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile          |  1 +
 arch/arm/boot/dts/overlays/README            |  8 ++++++++
 arch/arm/boot/dts/overlays/vl805-overlay.dts | 18 ++++++++++++++++++
 3 files changed, 27 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/vl805-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -243,6 +243,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	vc4-kms-v3d-pi4.dtbo \
 	vc4-kms-vga666.dtbo \
 	vga666.dtbo \
+	vl805.dtbo \
 	w1-gpio.dtbo \
 	w1-gpio-pullup.dtbo \
 	w5500.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -3744,6 +3744,14 @@ Load:   dtoverlay=vga666
 Params: <None>
 
 
+Name:   vl805
+Info:   Overlay to enable a VIA VL805 USB3 controller on CM4 carriers
+        Will be loaded automatically by up-to-date firmware if "VL805=1" is
+        set in the EEPROM config.
+Load:   dtoverlay=vl805
+Params: <None>
+
+
 Name:   w1-gpio
 Info:   Configures the w1-gpio Onewire interface module.
         Use this overlay if you *don't* need a GPIO to drive an external pullup.
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vl805-overlay.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	fragment@0 {
+		target-path = "pcie0/pci@0,0";
+		__overlay__ {
+			usb@0,0 {
+				reg = <0 0 0 0 0>;
+				resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+			};
+		};
+	};
+};