forked from openwrt/openwrt
/
0001-net-thunderx-add-support-for-rgmii-internal-delay-mo.patch
139 lines (120 loc) · 4.37 KB
/
0001-net-thunderx-add-support-for-rgmii-internal-delay-mo.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
From 69a99101748bb1bdb2730393ef48bc152c4d244a Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 12 Dec 2017 12:49:55 -0800
Subject: [PATCH] net: thunderx: add support for rgmii internal delay modes
The XCV_DLL_CTL is being configured with the assumption that
phy-mode is rgmii-txid (PHY_INTERFACE_MODE_RGMII_TXID) which is not always
the case.
This patch parses the phy-mode property and uses it to configure CXV_DLL_CTL
properly.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 13 +++++++---
drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 2 +-
drivers/net/ethernet/cavium/thunder/thunder_xcv.c | 31 ++++++++++++++++++-----
3 files changed, 35 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
@@ -55,6 +55,7 @@ struct bgx {
struct pci_dev *pdev;
bool is_dlm;
bool is_rgx;
+ int phy_mode;
};
static struct bgx *bgx_vnic[MAX_BGX_THUNDER];
@@ -841,12 +842,12 @@ static void bgx_poll_for_link(struct wor
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2);
}
-static int phy_interface_mode(u8 lmac_type)
+static int phy_interface_mode(struct bgx *bgx, u8 lmac_type)
{
if (lmac_type == BGX_MODE_QSGMII)
return PHY_INTERFACE_MODE_QSGMII;
if (lmac_type == BGX_MODE_RGMII)
- return PHY_INTERFACE_MODE_RGMII;
+ return bgx->phy_mode;
return PHY_INTERFACE_MODE_SGMII;
}
@@ -912,7 +913,8 @@ static int bgx_lmac_enable(struct bgx *b
if (phy_connect_direct(&lmac->netdev, lmac->phydev,
bgx_lmac_handler,
- phy_interface_mode(lmac->lmac_type)))
+ phy_interface_mode(bgx,
+ lmac->lmac_type)))
return -ENODEV;
phy_start(lmac->phydev);
@@ -1287,6 +1289,8 @@ static int bgx_init_of_phy(struct bgx *b
bgx->lmac[lmac].lmacid = lmac;
phy_np = of_parse_phandle(node, "phy-handle", 0);
+ if (phy_np)
+ bgx->phy_mode = of_get_phy_mode(phy_np);
/* If there is no phy or defective firmware presents
* this cortina phy, for which there is no driver
* support, ignore it.
@@ -1390,7 +1394,6 @@ static int bgx_probe(struct pci_dev *pde
bgx->max_lmac = 1;
bgx->bgx_id = MAX_BGX_PER_CN81XX - 1;
bgx_vnic[bgx->bgx_id] = bgx;
- xcv_init_hw();
}
/* On 81xx all are DLMs and on 83xx there are 3 BGX QLMs and one
@@ -1407,6 +1410,8 @@ static int bgx_probe(struct pci_dev *pde
if (err)
goto err_enable;
+ if (bgx->is_rgx)
+ xcv_init_hw(bgx->phy_mode);
bgx_init_hw(bgx);
/* Enable all LMACs */
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
@@ -226,7 +226,7 @@ void bgx_lmac_internal_loopback(int node
void bgx_lmac_get_pfc(int node, int bgx_idx, int lmacid, void *pause);
void bgx_lmac_set_pfc(int node, int bgx_idx, int lmacid, void *pause);
-void xcv_init_hw(void);
+void xcv_init_hw(int phy_mode);
void xcv_setup_link(bool link_up, int link_speed);
u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx);
--- a/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
+++ b/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
@@ -65,7 +65,7 @@ MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, xcv_id_table);
-void xcv_init_hw(void)
+void xcv_init_hw(int phy_mode)
{
u64 cfg;
@@ -81,12 +81,31 @@ void xcv_init_hw(void)
/* Wait for DLL to lock */
msleep(1);
- /* Configure DLL - enable or bypass
- * TX no bypass, RX bypass
- */
+ /* enable/bypass DLL providing MAC based internal TX/RX delays */
cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
- cfg &= ~0xFF03;
- cfg |= CLKRX_BYP;
+ cfg &= ~0xffff00;
+ switch (phy_mode) {
+ /* RX and TX delays are added by the MAC */
+ case PHY_INTERFACE_MODE_RGMII:
+ break;
+ /* internal RX and TX delays provided by the PHY */
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ cfg |= CLKRX_BYP;
+ cfg |= CLKTX_BYP;
+ break;
+ /* internal RX delay provided by the PHY, the MAC
+ * should not add an RX delay in this case
+ */
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ cfg |= CLKRX_BYP;
+ break;
+ /* internal TX delay provided by the PHY, the MAC
+ * should not add an TX delay in this case
+ */
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ cfg |= CLKRX_BYP;
+ break;
+ }
writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
/* Enable compensation controller and force the