060-no_local_ssb_bcma.patch

--- a/local-symbols
+++ b/local-symbols
@@ -417,43 +417,6 @@ USB_SIERRA_NET=
 USB_VL600=
 USB_NET_CH9200=
 USB_NET_AQC111=
-SSB_POSSIBLE=
-SSB=
-SSB_SPROM=
-SSB_BLOCKIO=
-SSB_PCIHOST_POSSIBLE=
-SSB_PCIHOST=
-SSB_B43_PCI_BRIDGE=
-SSB_PCMCIAHOST_POSSIBLE=
-SSB_PCMCIAHOST=
-SSB_SDIOHOST_POSSIBLE=
-SSB_SDIOHOST=
-SSB_HOST_SOC=
-SSB_SERIAL=
-SSB_DRIVER_PCICORE_POSSIBLE=
-SSB_DRIVER_PCICORE=
-SSB_PCICORE_HOSTMODE=
-SSB_DRIVER_MIPS=
-SSB_SFLASH=
-SSB_EMBEDDED=
-SSB_DRIVER_EXTIF=
-SSB_DRIVER_GIGE=
-SSB_DRIVER_GPIO=
-BCMA_POSSIBLE=
-BCMA=
-BCMA_BLOCKIO=
-BCMA_HOST_PCI_POSSIBLE=
-BCMA_HOST_PCI=
-BCMA_HOST_SOC=
-BCMA_DRIVER_PCI=
-BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_DRIVER_MIPS=
-BCMA_PFLASH=
-BCMA_SFLASH=
-BCMA_NFLASH=
-BCMA_DRIVER_GMAC_CMN=
-BCMA_DRIVER_GPIO=
-BCMA_DEBUG=
 USB_ACM=
 USB_PRINTER=
 USB_WDM=
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
@@ -63,21 +63,21 @@ endchoice
 config B43_PCI_AUTOSELECT
 	bool
 	depends on B43 && SSB_PCIHOST_POSSIBLE
-	select SSB_PCIHOST
-	select SSB_B43_PCI_BRIDGE
+	depends on SSB_PCIHOST
+	depends on SSB_B43_PCI_BRIDGE
 	default y
 
 # Auto-select SSB PCICORE driver, if possible
 config B43_PCICORE_AUTOSELECT
 	bool
 	depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
-	select SSB_DRIVER_PCICORE
+	depends on SSB_DRIVER_PCICORE
 	default y
 
 config B43_SDIO
 	bool "Broadcom 43xx SDIO device support"
 	depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
-	select SSB_SDIOHOST
+	depends on SSB_SDIOHOST
 	---help---
 	  Broadcom 43xx device support for Soft-MAC SDIO devices.
 
@@ -96,13 +96,13 @@ config B43_SDIO
 config B43_BCMA_PIO
 	bool
 	depends on B43 && B43_BCMA
-	select BCMA_BLOCKIO
+	depends on BCMA_BLOCKIO
 	default y
 
 config B43_PIO
 	bool
 	depends on B43 && B43_SSB
-	select SSB_BLOCKIO
+	depends on SSB_BLOCKIO
 	default y
 
 config B43_PHY_G
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -2851,7 +2851,7 @@ static struct ssb_device *b43_ssb_gpio_d
 {
 	struct ssb_bus *bus = dev->dev->sdev->bus;
 
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
 #else
 	return bus->chipco.dev;
@@ -4868,7 +4868,7 @@ static int b43_wireless_core_init(struct
 	}
 	if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
 		hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
-#if defined(CPTCFG_B43_SSB) && defined(CPTCFG_SSB_DRIVER_PCICORE)
+#if defined(CPTCFG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
 	if (dev->dev->bus_type == B43_BUS_SSB &&
 	    dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
 	    dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
@@ -3,7 +3,7 @@ config B43LEGACY
 	tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
 	depends on m
 	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
-	select SSB
+	depends on SSB
 	depends on FW_LOADER
 	---help---
 	  b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and
@@ -25,15 +25,15 @@ config B43LEGACY
 config B43LEGACY_PCI_AUTOSELECT
 	bool
 	depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
-	select SSB_PCIHOST
-	select SSB_B43_PCI_BRIDGE
+	depends on SSB_PCIHOST
+	depends on SSB_B43_PCI_BRIDGE
 	default y
 
 # Auto-select SSB PCICORE driver, if possible
 config B43LEGACY_PCICORE_AUTOSELECT
 	bool
 	depends on B43LEGACY && SSB_DRIVER_PCICORE_POSSIBLE
-	select SSB_DRIVER_PCICORE
+	depends on SSB_DRIVER_PCICORE
 	default y
 
 # LED support
--- a/drivers/net/wireless/broadcom/b43legacy/main.c
+++ b/drivers/net/wireless/broadcom/b43legacy/main.c
@@ -1906,7 +1906,7 @@ static int b43legacy_gpio_init(struct b4
 	if (dev->dev->id.revision >= 2)
 		mask  |= 0x0010; /* FIXME: This is redundant. */
 
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	pcidev = bus->pcicore.dev;
 #endif
 	gpiodev = bus->chipco.dev ? : pcidev;
@@ -1925,7 +1925,7 @@ static void b43legacy_gpio_cleanup(struc
 	struct ssb_bus *bus = dev->dev->bus;
 	struct ssb_device *gpiodev, *pcidev = NULL;
 
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	pcidev = bus->pcicore.dev;
 #endif
 	gpiodev = bus->chipco.dev ? : pcidev;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/led.h
@@ -22,7 +22,7 @@ struct brcms_led {
 	bool active_low;
 };
 
-#ifdef CPTCFG_BCMA_DRIVER_GPIO
+#ifdef CONFIG_BCMA_DRIVER_GPIO
 void brcms_led_unregister(struct brcms_info *wl);
 int brcms_led_register(struct brcms_info *wl);
 #else
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
@@ -42,6 +42,6 @@ brcmsmac-y := \
 	brcms_trace_events.o \
 	debug.o
 
-brcmsmac-$(CPTCFG_BCMA_DRIVER_GPIO) += led.o
+brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
 
 obj-$(CPTCFG_BRCMSMAC)	+= brcmsmac.o
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -8,7 +8,7 @@ config BRCMSMAC
 	depends on m
 	depends on MAC80211
 	depends on BCMA_POSSIBLE
-	select BCMA
+	depends on BCMA
 	select NEW_LEDS if BCMA_DRIVER_GPIO
 	select LEDS_CLASS if BCMA_DRIVER_GPIO
 	select BRCMUTIL
--- a/Kconfig.local
+++ b/Kconfig.local
@@ -1255,117 +1255,6 @@ config BACKPORTED_USB_NET_CH9200
 config BACKPORTED_USB_NET_AQC111
 	tristate
 	default USB_NET_AQC111
-config BACKPORTED_SSB_POSSIBLE
-	tristate
-	default SSB_POSSIBLE
-config BACKPORTED_SSB
-	tristate
-	default SSB
-config BACKPORTED_SSB_SPROM
-	tristate
-	default SSB_SPROM
-config BACKPORTED_SSB_BLOCKIO
-	tristate
-	default SSB_BLOCKIO
-config BACKPORTED_SSB_PCIHOST_POSSIBLE
-	tristate
-	default SSB_PCIHOST_POSSIBLE
-config BACKPORTED_SSB_PCIHOST
-	tristate
-	default SSB_PCIHOST
-config BACKPORTED_SSB_B43_PCI_BRIDGE
-	tristate
-	default SSB_B43_PCI_BRIDGE
-config BACKPORTED_SSB_PCMCIAHOST_POSSIBLE
-	tristate
-	default SSB_PCMCIAHOST_POSSIBLE
-config BACKPORTED_SSB_PCMCIAHOST
-	tristate
-	default SSB_PCMCIAHOST
-config BACKPORTED_SSB_SDIOHOST_POSSIBLE
-	tristate
-	default SSB_SDIOHOST_POSSIBLE
-config BACKPORTED_SSB_SDIOHOST
-	tristate
-	default SSB_SDIOHOST
-config BACKPORTED_SSB_HOST_SOC
-	tristate
-	default SSB_HOST_SOC
-config BACKPORTED_SSB_SERIAL
-	tristate
-	default SSB_SERIAL
-config BACKPORTED_SSB_DRIVER_PCICORE_POSSIBLE
-	tristate
-	default SSB_DRIVER_PCICORE_POSSIBLE
-config BACKPORTED_SSB_DRIVER_PCICORE
-	tristate
-	default SSB_DRIVER_PCICORE
-config BACKPORTED_SSB_PCICORE_HOSTMODE
-	tristate
-	default SSB_PCICORE_HOSTMODE
-config BACKPORTED_SSB_DRIVER_MIPS
-	tristate
-	default SSB_DRIVER_MIPS
-config BACKPORTED_SSB_SFLASH
-	tristate
-	default SSB_SFLASH
-config BACKPORTED_SSB_EMBEDDED
-	tristate
-	default SSB_EMBEDDED
-config BACKPORTED_SSB_DRIVER_EXTIF
-	tristate
-	default SSB_DRIVER_EXTIF
-config BACKPORTED_SSB_DRIVER_GIGE
-	tristate
-	default SSB_DRIVER_GIGE
-config BACKPORTED_SSB_DRIVER_GPIO
-	tristate
-	default SSB_DRIVER_GPIO
-config BACKPORTED_BCMA_POSSIBLE
-	tristate
-	default BCMA_POSSIBLE
-config BACKPORTED_BCMA
-	tristate
-	default BCMA
-config BACKPORTED_BCMA_BLOCKIO
-	tristate
-	default BCMA_BLOCKIO
-config BACKPORTED_BCMA_HOST_PCI_POSSIBLE
-	tristate
-	default BCMA_HOST_PCI_POSSIBLE
-config BACKPORTED_BCMA_HOST_PCI
-	tristate
-	default BCMA_HOST_PCI
-config BACKPORTED_BCMA_HOST_SOC
-	tristate
-	default BCMA_HOST_SOC
-config BACKPORTED_BCMA_DRIVER_PCI
-	tristate
-	default BCMA_DRIVER_PCI
-config BACKPORTED_BCMA_DRIVER_PCI_HOSTMODE
-	tristate
-	default BCMA_DRIVER_PCI_HOSTMODE
-config BACKPORTED_BCMA_DRIVER_MIPS
-	tristate
-	default BCMA_DRIVER_MIPS
-config BACKPORTED_BCMA_PFLASH
-	tristate
-	default BCMA_PFLASH
-config BACKPORTED_BCMA_SFLASH
-	tristate
-	default BCMA_SFLASH
-config BACKPORTED_BCMA_NFLASH
-	tristate
-	default BCMA_NFLASH
-config BACKPORTED_BCMA_DRIVER_GMAC_CMN
-	tristate
-	default BCMA_DRIVER_GMAC_CMN
-config BACKPORTED_BCMA_DRIVER_GPIO
-	tristate
-	default BCMA_DRIVER_GPIO
-config BACKPORTED_BCMA_DEBUG
-	tristate
-	default BCMA_DEBUG
 config BACKPORTED_USB_ACM
 	tristate
 	default USB_ACM
--- a/Kconfig.sources
+++ b/Kconfig.sources
@@ -7,9 +7,6 @@ source "$BACKPORT_DIR/net/mac80211/Kconf
 source "$BACKPORT_DIR/drivers/net/wireless/Kconfig"
 source "$BACKPORT_DIR/drivers/net/usb/Kconfig"
 
-source "$BACKPORT_DIR/drivers/ssb/Kconfig"
-source "$BACKPORT_DIR/drivers/bcma/Kconfig"
-
 source "$BACKPORT_DIR/drivers/usb/class/Kconfig"
 
 source "$BACKPORT_DIR/drivers/staging/Kconfig"
--- a/Makefile.kernel
+++ b/Makefile.kernel
@@ -40,8 +40,6 @@ obj-y += compat/
 obj-$(CPTCFG_CFG80211) += net/wireless/
 obj-$(CPTCFG_MAC80211) += net/mac80211/
 obj-$(CPTCFG_WLAN) += drivers/net/wireless/
-obj-$(CPTCFG_SSB) += drivers/ssb/
-obj-$(CPTCFG_BCMA) += drivers/bcma/
 obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
 
 obj-$(CPTCFG_USB_WDM) += drivers/usb/class/