forked from openwrt/openwrt
/
722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
154 lines (147 loc) · 5.08 KB
/
722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
From: Alex Marginean <alexandru.marginean@nxp.com>
Date: Tue, 27 Aug 2019 15:16:56 +0300
Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
Adds support for AQR112 and AQR412 which is mostly based on existing code
with the addition of code configuring the protocol on system side.
This allows changing the system side protocol without having to deploy a
different firmware on the PHY.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
---
drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -20,9 +20,11 @@
#define PHY_ID_AQR105 0x03a1b4a2
#define PHY_ID_AQR106 0x03a1b4d0
#define PHY_ID_AQR107 0x03a1b4e0
+#define PHY_ID_AQR112 0x03a1b662
#define PHY_ID_AQR113C 0x31c31c12
#define PHY_ID_AQCS109 0x03a1b5c2
#define PHY_ID_AQR405 0x03a1b4b0
+#define PHY_ID_AQR412 0x03a1b712
#define PHY_ID_AQR813 0x31c31cb2
#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
@@ -124,6 +126,29 @@
#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1)
#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0)
+/* registers in MDIO_MMD_VEND1 region */
+#define AQUANTIA_VND1_GLOBAL_SC 0x000
+#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb)
+
+/* global start rate, the protocol associated with this speed is used by default
+ * on SI.
+ */
+#define AQUANTIA_VND1_GSTART_RATE 0x31a
+#define AQUANTIA_VND1_GSTART_RATE_OFF 0
+#define AQUANTIA_VND1_GSTART_RATE_100M 1
+#define AQUANTIA_VND1_GSTART_RATE_1G 2
+#define AQUANTIA_VND1_GSTART_RATE_10G 3
+#define AQUANTIA_VND1_GSTART_RATE_2_5G 4
+#define AQUANTIA_VND1_GSTART_RATE_5G 5
+
+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
+#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b
+#define AQUANTIA_VND1_GSYSCFG_100M 0
+#define AQUANTIA_VND1_GSYSCFG_1G 1
+#define AQUANTIA_VND1_GSYSCFG_2_5G 2
+#define AQUANTIA_VND1_GSYSCFG_5G 3
+#define AQUANTIA_VND1_GSYSCFG_10G 4
+
struct aqr107_hw_stat {
const char *name;
int reg;
@@ -244,6 +269,51 @@ static int aqr_config_aneg(struct phy_de
return genphy_c45_check_and_restart_aneg(phydev, changed);
}
+static struct {
+ u16 syscfg;
+ int cnt;
+ u16 start_rate;
+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
+ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
+ AQUANTIA_VND1_GSTART_RATE_1G},
+ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
+ AQUANTIA_VND1_GSTART_RATE_2_5G},
+ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G,
+ AQUANTIA_VND1_GSTART_RATE_10G},
+ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G,
+ AQUANTIA_VND1_GSTART_RATE_10G},
+};
+
+/* Sets up protocol on system side before calling aqr_config_aneg */
+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
+{
+ int if_type = phydev->interface;
+ int i;
+
+ if (!aquantia_syscfg[if_type].cnt)
+ return 0;
+
+ /* set PHY in low power mode so we can configure protocols */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
+ AQUANTIA_VND1_GLOBAL_SC_LP);
+ mdelay(10);
+
+ /* set the default rate to enable the SI link */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
+ aquantia_syscfg[if_type].start_rate);
+
+ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
+ phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ AQUANTIA_VND1_GSYSCFG_BASE + i,
+ aquantia_syscfg[if_type].syscfg);
+
+ /* wake PHY back up */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
+ mdelay(10);
+
+ return aqr_config_aneg(phydev);
+}
+
static int aqr_config_intr(struct phy_device *phydev)
{
bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
@@ -767,6 +837,30 @@ static struct phy_driver aqr_driver[] =
.get_stats = aqr107_get_stats,
.link_change_notify = aqr107_link_change_notify,
},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
+ .name = "Aquantia AQR112",
+ .probe = aqr107_probe,
+ .config_aneg = aqr_config_aneg_set_prot,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+},
+{
+ PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
+ .name = "Aquantia AQR412",
+ .probe = aqr107_probe,
+ .config_aneg = aqr_config_aneg_set_prot,
+ .config_intr = aqr_config_intr,
+ .handle_interrupt = aqr_handle_interrupt,
+ .read_status = aqr107_read_status,
+ .get_sset_count = aqr107_get_sset_count,
+ .get_strings = aqr107_get_strings,
+ .get_stats = aqr107_get_stats,
+},
};
module_phy_driver(aqr_driver);
@@ -777,9 +871,11 @@ static struct mdio_device_id __maybe_unu
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
{ }
};