qca9558_sitecom_wlr-8100.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca955x.dtsi"

/ {
	model = "Sitecom WLR-8100 (X8 AC1750)";
	compatible = "sitecom,wlr-8100", "qca,qca9558";

	aliases {
		led-boot = &led_status_amber;
		led-failsafe = &led_status_amber;
		led-running = &led_status_amber;
		led-upgrade = &led_status_amber;
	};

	keys {
		compatible = "gpio-keys";

		wifi2g_rfkill {
			label = "2.4GHz - RFKILL";
			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};

		wifi5g_restart {
			label = "5GHz - RESTART";
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_status_amber: status_amber {
			label = "wlr-8100:amber:status";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
			default-state = "on";
		};

		ops {
			label = "wlr-8100:white:ops";
			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
		};

		wifi2g {
			label = "wlr-8100:blue:wifi2g";
			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		wifi5g {
			label = "wlr-8100:blue:wifi5g";
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};
	};
};

&spi {
	status = "okay";

	num-cs = <1>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			uboot: partition@0 {
				label = "u-boot";
				reg = <0x000000 0x030000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x030000 0x010000>;
				read-only;
			};

			partition@40000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x040000 0xf10000>;
			};

			partition@f50000 {
				label = "manufacture";
				reg = <0xf50000 0x040000>;
				read-only;
			};

			partition@f90000 {
				label = "backup";
				reg = <0xf90000  0x010000>;
				read-only;
			};

			partition@fa0000 {
				label = "storage";
				reg = <0xfa0000 0x050000>;
				read-only;
			};

			art: partition@ff0000 {
				label = "art";
				reg = <0xff0000 0x010000>;
				read-only;
			};
		};
	};
};

&pcie0 {
	status = "okay";
};

&pcie1 {
	status = "okay";

	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0 0 0 0 0>;
	};
};

&uart {
	status = "okay";
};

&usb_phy0 {
	status = "okay";
};

&usb0 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;

		qca,ar8327-initvals = <
			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
			0x50 0xc437c437 /* LED Control Register 0 */
			0x54 0xc337c337 /* LED Control Register 1 */
			0x58 0x00000000 /* LED Control Register 2 */
			0x5c 0x03ffff00 /* LED Control Register 3 */
			0x7c 0x0000007e /* PORT0_STATUS */
			>;
	};
};

&eth0 {
	status = "okay";
	phy-handle = <&phy0>;
	pll-data = <0xa6000000 0x00000101 0x00001616>;

	gmac-config {
		device = <&gmac>;
		rgmii-enabled = <1>;
	};
};

&wmac {
	status = "okay";
	qca,no-eeprom;
};