950-0331-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch

From b1d33d1e5a44afd2025c5a44a85dc2fab00ec6a7 Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Tue, 5 Nov 2019 11:28:19 +0000
Subject: [PATCH] Revert "pinctrl: bcm2835: Pass irqchip when adding
 gpiochip"

This reverts commit 73345a18d464b1b945b29f54f630ace6873344e2.
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 55 +++++++++++++++------------
 1 file changed, 30 insertions(+), 25 deletions(-)

--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -78,6 +78,7 @@
 struct bcm2835_pinctrl {
 	struct device *dev;
 	void __iomem *base;
+	int irq[BCM2835_NUM_IRQS];
 
 	/* note: locking assumes each bank will have its own unsigned long */
 	unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
@@ -381,14 +382,14 @@ static void bcm2835_gpio_irq_handler(str
 	int group;
 	int i;
 
-	for (i = 0; i < BCM2835_NUM_IRQS; i++) {
-		if (chip->irq.parents[i] == irq) {
+	for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
+		if (pc->irq[i] == irq) {
 			group = i;
 			break;
 		}
 	}
 	/* This should not happen, every IRQ has a bank */
-	if (i == BCM2835_NUM_IRQS)
+	if (i == ARRAY_SIZE(pc->irq))
 		BUG();
 
 	chained_irq_enter(host_chip, desc);
@@ -1086,7 +1087,6 @@ static int bcm2835_pinctrl_probe(struct
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct bcm2835_pinctrl *pc;
-	struct gpio_irq_chip *girq;
 	struct resource iomem;
 	int err, i;
 	const struct of_device_id *match;
@@ -1135,33 +1135,38 @@ static int bcm2835_pinctrl_probe(struct
 		raw_spin_lock_init(&pc->irq_lock[i]);
 	}
 
-	girq = &pc->gpio_chip.irq;
-	girq->chip = &bcm2835_gpio_irq_chip;
-	girq->parent_handler = bcm2835_gpio_irq_handler;
-	girq->num_parents = BCM2835_NUM_IRQS;
-	girq->parents = devm_kcalloc(dev, BCM2835_NUM_IRQS,
-				     sizeof(*girq->parents),
-				     GFP_KERNEL);
-	if (!girq->parents)
-		return -ENOMEM;
-	/*
-	 * Use the same handler for all groups: this is necessary
-	 * since we use one gpiochip to cover all lines - the
-	 * irq handler then needs to figure out which group and
-	 * bank that was firing the IRQ and look up the per-group
-	 * and bank data.
-	 */
-	for (i = 0; i < BCM2835_NUM_IRQS; i++)
-		girq->parents[i] = irq_of_parse_and_map(np, i);
-	girq->default_type = IRQ_TYPE_NONE;
-	girq->handler = handle_level_irq;
-
 	err = gpiochip_add_data(&pc->gpio_chip, pc);
 	if (err) {
 		dev_err(dev, "could not add GPIO chip\n");
 		return err;
 	}
 
+	err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
+				   0, handle_level_irq, IRQ_TYPE_NONE);
+	if (err) {
+		dev_info(dev, "could not add irqchip\n");
+		return err;
+	}
+
+	for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+		pc->irq[i] = irq_of_parse_and_map(np, i);
+
+		if (pc->irq[i] == 0)
+			continue;
+
+		/*
+		 * Use the same handler for all groups: this is necessary
+		 * since we use one gpiochip to cover all lines - the
+		 * irq handler then needs to figure out which group and
+		 * bank that was firing the IRQ and look up the per-group
+		 * and bank data.
+		 */
+		gpiochip_set_chained_irqchip(&pc->gpio_chip,
+					     &bcm2835_gpio_irq_chip,
+					     pc->irq[i],
+					     bcm2835_gpio_irq_handler);
+	}
+
 	match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
 	if (match) {
 		bcm2835_pinctrl_desc.confops =