950-0721-dtoverlays-Add-IMX477-sensor-overlay.patch

From 738defbb964c5d2a34b08c24ac0e7fd4afb16173 Mon Sep 17 00:00:00 2001
From: Naushir Patuck <naush@raspberrypi.com>
Date: Thu, 7 May 2020 15:50:04 +0100
Subject: [PATCH] dtoverlays: Add IMX477 sensor overlay

Add an overlay for the Sony IMX477 CMOS sensor device.
Also update overlay README and Makefile.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |   1 +
 arch/arm/boot/dts/overlays/README             |   8 ++
 arch/arm/boot/dts/overlays/imx477-overlay.dts | 110 ++++++++++++++++++
 3 files changed, 119 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/imx477-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -85,6 +85,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	i2s-gpio28-31.dtbo \
 	ilitek251x.dtbo \
 	imx219.dtbo \
+	imx477.dtbo \
 	iqaudio-codec.dtbo \
 	iqaudio-dac.dtbo \
 	iqaudio-dacplus.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1390,6 +1390,14 @@ Load:   dtoverlay=imx219
 Params: <None>
 
 
+Name:   imx477
+Info:   Sony IMX477 camera module.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=imx477
+Params: <None>
+
+
 Name:   iqaudio-codec
 Info:   Configures the IQaudio Codec audio card
 Load:   dtoverlay=iqaudio-codec
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/imx477-overlay.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for IMX477 camera module on VC I2C bus
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c_csi_dsi>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			imx477: imx477@1a {
+				compatible = "sony,imx477";
+				reg = <0x1a>;
+				status = "okay";
+
+				clocks = <&imx477_clk>;
+				clock-names = "xclk";
+
+				VANA-supply = <&imx477_vana>;	/* 2.8v */
+				VDIG-supply = <&imx477_vdig>;	/* 1.05v */
+				VDDL-supply = <&imx477_vddl>;	/* 1.8v */
+
+				port {
+					imx477_0: endpoint {
+						remote-endpoint = <&csi1_ep>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+						clock-noncontinuous;
+						link-frequencies =
+							/bits/ 64 <450000000>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&csi1>;
+		__overlay__ {
+			status = "okay";
+
+			port {
+				csi1_ep: endpoint {
+					remote-endpoint = <&imx477_0>;
+				};
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c0if>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@3 {
+		target-path="/";
+		__overlay__ {
+			imx477_vana: fixedregulator@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "imx477_vana";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
+				enable-active-high;
+				startup-delay-us = <300000>;
+			};
+			imx477_vdig: fixedregulator@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "imx477_vdig";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+			imx477_vddl: fixedregulator@2 {
+				compatible = "regulator-fixed";
+				regulator-name = "imx477_vddl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+			imx477_clk: camera-clk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c0mux>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@5 {
+		target-path="/__overrides__";
+		__overlay__ {
+			cam0-pwdn-ctrl = <&imx477_vana>,"gpio:0";
+			cam0-pwdn      = <&imx477_vana>,"gpio:4";
+		};
+	};
+};