qcom-ipq8064-db149.dts

#include "qcom-ipq8064-v1.0.dtsi"

/ {
	model = "Qualcomm IPQ8064/DB149";
	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";

	aliases {
		serial0 = &gsbi2_serial;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		rsvd@41200000 {
			reg = <0x41200000 0x300000>;
			no-map;
		};
	};
};

&qcom_pinmux {
	rgmii0_pins: rgmii0_pins {
		mux {
			pins = "gpio2", "gpio66";
			drive-strength = <8>;
			bias-disable;
		};
	};
};

&gsbi2 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";

	gsbi2_serial: serial@12490000 {
		status = "okay";
	};
};

&gsbi4 {
	status = "disabled";
};

&gsbi4_serial {
	status = "disabled";
};

&flash {
	m25p,fast-read;

	partition@0 {
		label = "lowlevel_init";
		reg = <0x0 0x1b0000>;
	};

	partition@1 {
		label = "u-boot";
		reg = <0x1b0000 0x80000>;
	};

	partition@2 {
		label = "u-boot-env";
		reg = <0x230000 0x40000>;
	};

	partition@3 {
		label = "caldata";
		reg = <0x270000 0x40000>;
	};

	partition@4 {
		label = "firmware";
		reg = <0x2b0000 0x1d50000>;
	};
};

&usb3_0 {
	status = "okay";
};

&usb3_1 {
	status = "okay";
};

&pcie0 {
	status = "okay";
};

&pcie1 {
	status = "okay";
};

&pcie2 {
	status = "okay";
};

&mdio0 {
	status = "okay";

	pinctrl-0 = <&mdio0_pins>;
	pinctrl-names = "default";

	phy0: ethernet-phy@0 {
		reg = <0>;
		qca,ar8327-initvals = <
			0x00004 0x7600000   /* PAD0_MODE */
			0x00008 0x1000000   /* PAD5_MODE */
			0x0000c 0x80        /* PAD6_MODE */
			0x000e4 0x6a545     /* MAC_POWER_SEL */
			0x000e0 0xc74164de  /* SGMII_CTRL */
			0x0007c 0x4e        /* PORT0_STATUS */
			0x00094 0x4e        /* PORT6_STATUS */
		>;
	};

	phy4: ethernet-phy@4 {
		reg = <4>;
	};

	phy6: ethernet-phy@6 {
		reg = <6>;
	};

	phy7: ethernet-phy@7 {
		reg = <7>;
	};
};

&gmac0 {
	status = "okay";
	phy-mode = "rgmii";
	qcom,id = <0>;
	phy-handle = <&phy4>;

	pinctrl-0 = <&rgmii0_pins>;
	pinctrl-names = "default";
};

&gmac1 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <1>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <2>;
	phy-handle = <&phy6>;
};

&gmac3 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <3>;
	phy-handle = <&phy7>;
};