950-0571-dtoverlays-Add-overlays-for-JDI-LT070ME05000-1200x19.patch

From 5752746d0694ee607c2971735f2befc8a86fbab9 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 15 Apr 2021 16:46:34 +0100
Subject: [PATCH] dtoverlays: Add overlays for JDI LT070ME05000
 1200x1920 DSI panel

Credit to forum member gizmomouse on
https://www.raspberrypi.org/forums/viewtopic.php?f=98&t=253912 and
Andrey Vostrukhin of Harlab for these overlays.

See https://github.com/harlab/CM4_LCD_LT070ME05000 for
schematics and docs for the adapter board to connect this panel which
is found in the Asus/Google 2013 Nexus 7" tablet and therefore
relatively easily available.

Note that this uses 4 DSI data lanes, and therefore MUST be used
with DISP1 on a Compute Module. It can not be used on a standard
Pi.

There are two versions of the adapter board. V1 connects the
display controls to Pi GPIOs, whilst v2 uses an I2C GPIO expander
so needs no additional connections beyond the FFC and power.

The touchscreen overlay for these panels varies, so that part
is not configured.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |  2 +
 arch/arm/boot/dts/overlays/README             | 21 ++++++
 .../vc4-kms-dsi-lt070me05000-overlay.dts      | 69 +++++++++++++++++++
 .../vc4-kms-dsi-lt070me05000-v2-overlay.dts   | 64 +++++++++++++++++
 4 files changed, 156 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-v2-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -213,6 +213,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	upstream-pi4.dtbo \
 	vc4-fkms-v3d.dtbo \
 	vc4-kms-dsi-7inch.dtbo \
+	vc4-kms-dsi-lt070me05000.dtbo \
+	vc4-kms-dsi-lt070me05000-v2.dtbo \
 	vc4-kms-kippah-7inch.dtbo \
 	vc4-kms-v3d.dtbo \
 	vc4-kms-v3d-pi4.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -3158,6 +3158,27 @@ Load:   dtoverlay=vc4-kms-dsi-7inch
 Params: <None>
 
 
+Name:   vc4-kms-dsi-lt070me05000
+Info:   Enable a JDI LT070ME05000 DSI display on DSI1.
+        Note that this is a 4 lane DSI device, so it will only work on a Compute
+        Module.
+        Requires vc4-kms-v3d to be loaded.
+Load:   dtoverlay=vc4-kms-dsi-lt070me05000,<param>
+Params: reset                   GPIO for the reset signal (default 17)
+        enable                  GPIO for the enable signal (default 4)
+        dcdc-en                 GPIO for the DC-DC converter enable (default 5)
+
+
+Name:   vc4-kms-dsi-lt070me05000-v2
+Info:   Enable a JDI LT070ME05000 DSI display on DSI1 using Harlab's V2
+        interface board.
+        Note that this is a 4 lane DSI device, so it will only work on a Compute
+        Module.
+        Requires vc4-kms-v3d to be loaded.
+Load:   dtoverlay=vc4-kms-dsi-lt070me05000-v2
+Params: <None>
+
+
 Name:   vc4-kms-kippah-7inch
 Info:   Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
         Requires vc4-kms-v3d to be loaded.
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-overlay.dts
@@ -0,0 +1,69 @@
+/*
+ * Device Tree overlay to connect a JDI LT070ME05000 DSI panel to DSI1.
+ * This uses 4 DSI data lanes, so can only be used with a Compute Module.
+ *
+ * Credit to forum user gizmomouse on
+ * https://www.raspberrypi.org/forums/viewtopic.php?f=98&t=253912 and
+ * Andrey Vostrukhin of Harlab for the overlay.
+ *
+ * Refer to https://github.com/harlab/CM4_LCD_LT070ME05000 for schematics and
+ * other documentation.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&dsi1>;
+		__overlay__{
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port {
+				dsi_out_port:endpoint {
+					remote-endpoint = <&panel_dsi_port>;
+				};
+			};
+
+			lt070me05000:lt070me05000@0 {
+				compatible    = "jdi,lt070me05000";
+				status        = "okay";
+				reg           = <0>;
+				reset-gpios   = <&gpio 17 1>;   // LCD RST
+				enable-gpios  = <&gpio 4 0>;    // LCD Enable
+				dcdc-en-gpios = <&gpio 5 0>;    // LCD DC-DC Enable
+				port {
+					panel_dsi_port: endpoint {
+						remote-endpoint = <&dsi_out_port>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&gpio>;
+		__overlay__ {
+			lt070me05000_pins: lt070me05000_pins {
+				brcm,pins = <4 5 17>;
+				brcm,function = <1 1 1>; // out
+				brcm,pull = <0 0 0>; // off
+			};
+		};
+
+	};
+
+	__overrides__ {
+		reset = <&lt070me05000_pins>,"brcm,pins:8",
+			<&lt070me05000>,"reset-gpios:4";
+
+		enable = <&lt070me05000_pins>,"brcm,pins:0",
+			<&lt070me05000>,"enable-gpios:4";
+
+		dcdc-en = <&lt070me05000_pins>,"brcm,pins:4",
+			<&lt070me05000>,"dcdc-en-gpios:4";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-v2-overlay.dts
@@ -0,0 +1,64 @@
+/*
+ * Device Tree overlay to connect a JDI LT070ME05000 DSI panel to DSI1.
+ * This uses 4 DSI data lanes, so can only be used with a Compute Module.
+ *
+ * The overlay is for V2 of Harlab's interface board that uses a PCA9536 to
+ * handle the panel's control GPIOs instead of wiring it back to Pi GPIOs.
+ *
+ * Credit to Andrey Vostrukhin of Harlab for the overlay.
+ *
+ * Refer to https://github.com/harlab/CM4_LCD_LT070ME05000 for schematics and
+ * other documentation.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2c_csi_dsi>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pca: pca@41 {
+				compatible = "nxp,pca9536";
+				reg = <0x41>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&dsi1>;
+		__overlay__{
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port {
+				dsi_out_port:endpoint {
+					remote-endpoint = <&panel_dsi_port>;
+				};
+			};
+
+			lt070me05000:lt070me05000@0 {
+				compatible    = "jdi,lt070me05000";
+				status        = "okay";
+				reg           = <0>;
+				reset-gpios   = <&pca 0 1>;
+				enable-gpios  = <&pca 2 0>;
+				dcdc-en-gpios = <&pca 1 0>;
+				port {
+					panel_dsi_port: endpoint {
+						remote-endpoint = <&dsi_out_port>;
+					};
+				};
+			};
+		};
+	};
+};