qcom-ipq8064-c2600.dts

#include "qcom-ipq8064-v2.0.dtsi"

#include <dt-bindings/input/input.h>

/ {
	model = "TP-Link Archer C2600";
	compatible = "tplink,c2600", "qcom,ipq8064";

	memory@0 {
		reg = <0x42000000 0x1e000000>;
		device_type = "memory";
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		rsvd@41200000 {
			reg = <0x41200000 0x300000>;
			no-map;
		};
	};

	aliases {
		mdio-gpio0 = &mdio0;

		led-boot = &power;
		led-failsafe = &general;
		led-running = &power;
		led-upgrade = &general;
		label-mac-device = &gmac2;
	};

	keys {
		compatible = "gpio-keys";
		pinctrl-0 = <&button_pins>;
		pinctrl-names = "default";

		wifi {
			label = "wifi";
			gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};

		reset {
			label = "reset";
			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		ledswitch {
			label = "ledswitch";
			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_LIGHTS_TOGGLE>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&led_pins>;
		pinctrl-names = "default";

		lan {
			label = "c2600:white:lan";
			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
		};

		usb4 {
			label = "c2600:white:usb_4";
			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
		};

		usb2 {
			label = "c2600:white:usb_2";
			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
		};

		wps {
			label = "c2600:white:wps";
			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
		};

		wan_amber {
			label = "c2600:amber:wan";
			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
		};

		wan_white {
			label = "c2600:white:wan";
			gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
		};

		power: power {
			label = "c2600:white:power";
			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
			default-state = "keep";
		};

		general: general {
			label = "c2600:white:general";
			gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
		};
	};
};

&qcom_pinmux {
	button_pins: button_pins {
		mux {
			pins = "gpio16", "gpio54", "gpio65";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	led_pins: led_pins {
		mux {
			pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
					"gpio53", "gpio66";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-up;
		};
	};

	spi_pins: spi_pins {
		mux {
			pins = "gpio18", "gpio19", "gpio21";
			function = "gsbi5";
			bias-pull-down;
		};

		data {
			pins = "gpio18", "gpio19";
			drive-strength = <10>;
		};

		cs {
			pins = "gpio20";
			function = "gpio";
			drive-strength = <10>;
			bias-pull-up;
		};

		clk {
			pins = "gpio21";
			drive-strength = <12>;
		};
	};

	usb0_pwr_en_pin: usb0_pwr_en_pin {
		mux {
			pins = "gpio25";
			function = "gpio";
			drive-strength = <10>;
			bias-pull-up;
			output-high;
		};
	};

	usb1_pwr_en_pin: usb1_pwr_en_pin {
		mux {
			pins = "gpio23";
			function = "gpio";
			drive-strength = <10>;
			bias-pull-up;
			output-high;
		};
	};
};

&gsbi4 {
	qcom,mode = <GSBI_PROT_I2C_UART>;
	status = "okay";
	serial@16340000 {
		status = "okay";
	};
	/*
		* The i2c device on gsbi4 should not be enabled.
		* On ipq806x designs gsbi4 i2c is meant for exclusive
		* RPM usage. Turning this on in kernel manifests as
		* i2c failure for the RPM.
		*/
};

&gsbi5 {
	qcom,mode = <GSBI_PROT_SPI>;
	status = "okay";

	spi5: spi@1a280000 {
		status = "okay";

		pinctrl-0 = <&spi_pins>;
		pinctrl-names = "default";

		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;

		m25p80@0 {
			compatible = "jedec,spi-nor";
			#address-cells = <1>;
			#size-cells = <1>;
			spi-max-frequency = <50000000>;
			reg = <0>;

			SBL1@0 {
				label = "SBL1";
				reg = <0x0 0x20000>;
				read-only;
			};

			MIBIB@20000 {
				label = "MIBIB";
				reg = <0x20000 0x20000>;
				read-only;
			};

			SBL2@40000 {
				label = "SBL2";
				reg = <0x40000 0x20000>;
				read-only;
			};

			SBL3@60000 {
				label = "SBL3";
				reg = <0x60000 0x30000>;
				read-only;
			};

			DDRCONFIG@90000 {
				label = "DDRCONFIG";
				reg = <0x90000 0x10000>;
				read-only;
			};

			SSD@a0000 {
				label = "SSD";
				reg = <0xa0000 0x10000>;
				read-only;
			};

			TZ@b0000 {
				label = "TZ";
				reg = <0xb0000 0x30000>;
				read-only;
			};

			RPM@e0000 {
				label = "RPM";
				reg = <0xe0000 0x20000>;
				read-only;
			};

			fs-uboot@100000 {
				label = "fs-uboot";
				reg = <0x100000 0x70000>;
				read-only;
			};

			uboot-env@170000 {
				label = "uboot-env";
				reg = <0x170000 0x40000>;
				read-only;
			};

			radio@1b0000 {
				label = "radio";
				reg = <0x1b0000 0x40000>;
				read-only;
			};

			os-image@1f0000 {
				label = "os-image";
				reg = <0x1f0000 0x400000>;
			};

			rootfs@5f0000 {
				label = "rootfs";
				reg = <0x5f0000 0x1900000>;
			};

			defaultmac: default-mac@1ef0000 {
				label = "default-mac";
				reg = <0x1ef0000 0x00200>;
				read-only;
			};

			pin@1ef0200 {
				label = "pin";
				reg = <0x1ef0200 0x00200>;
				read-only;
			};

			product-info@1ef0400 {
				label = "product-info";
				reg = <0x1ef0400 0x0fc00>;
				read-only;
			};

			partition-table@1f00000 {
				label = "partition-table";
				reg = <0x1f00000 0x10000>;
				read-only;
			};

			soft-version@1f10000 {
				label = "soft-version";
				reg = <0x1f10000 0x10000>;
				read-only;
			};

			support-list@1f20000 {
				label = "support-list";
				reg = <0x1f20000 0x10000>;
				read-only;
			};

			profile@1f30000 {
				label = "profile";
				reg = <0x1f30000 0x10000>;
				read-only;
			};

			default-config@1f40000 {
				label = "default-config";
				reg = <0x1f40000 0x10000>;
				read-only;
			};

			user-config@1f50000 {
				label = "user-config";
				reg = <0x1f50000 0x40000>;
				read-only;
			};

			qos-db@1f90000 {
				label = "qos-db";
				reg = <0x1f90000 0x40000>;
				read-only;
			};

			usb-config@1fd0000 {
				label = "usb-config";
				reg = <0x1fd0000 0x10000>;
				read-only;
			};

			log@1fe0000 {
				label = "log";
				reg = <0x1fe0000 0x20000>;
				read-only;
			};
		};
	};
};

&usb3_0 {
	status = "okay";

	pinctrl-0 = <&usb0_pwr_en_pin>;
	pinctrl-names = "default";
};

&usb3_1 {
	status = "okay";

	pinctrl-0 = <&usb1_pwr_en_pin>;
	pinctrl-names = "default";
};

&pcie0 {
	status = "okay";
};

&pcie1 {
	status = "okay";
	force_gen1 = <1>;
};

&mdio0 {
	status = "okay";

	pinctrl-0 = <&mdio0_pins>;
	pinctrl-names = "default";

	phy0: ethernet-phy@0 {
		reg = <0>;
		qca,ar8327-initvals = <
			0x00004 0x7600000   /* PAD0_MODE */
			0x00008 0x1000000   /* PAD5_MODE */
			0x0000c 0x80        /* PAD6_MODE */
			0x000e4 0x6a545     /* MAC_POWER_SEL */
			0x000e0 0xc74164de  /* SGMII_CTRL */
			0x0007c 0x4e        /* PORT0_STATUS */
			0x00094 0x4e        /* PORT6_STATUS */
			>;
	};

	phy4: ethernet-phy@4 {
		reg = <4>;
	};
};

&gmac1 {
	status = "okay";
	phy-mode = "rgmii";
	qcom,id = <1>;

	pinctrl-0 = <&rgmii2_pins>;
	pinctrl-names = "default";

	mtd-mac-address = <&defaultmac 0x8>;
	mtd-mac-address-increment = <1>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&gmac2 {
	status = "okay";
	phy-mode = "sgmii";
	qcom,id = <2>;

	mtd-mac-address = <&defaultmac 0x8>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&adm_dma {
	status = "okay";
};