740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch

From 29cd215aaf6c2050c43e4de03aee436c16f90b96 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 21 Nov 2019 17:27:14 +0000
Subject: [PATCH 643/660] net: sfp: remove incomplete 100BASE-FX and 100BASE-LX
 support

The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this
is probably an incorrect assumption. In any case, sfp_parse_support()
will fail such a module. Let's stop pretending we support these
modules.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/sfp-bus.c |  4 +---
 drivers/net/phy/sfp.c     | 13 +------------
 2 files changed, 2 insertions(+), 15 deletions(-)

--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -341,9 +341,7 @@ phy_interface_t sfp_select_interface(str
 	if (phylink_test(link_modes, 2500baseX_Full))
 		return PHY_INTERFACE_MODE_2500BASEX;
 
-	if (id->base.e1000_base_t ||
-	    id->base.e100_base_lx ||
-	    id->base.e100_base_fx)
+	if (id->base.e1000_base_t)
 		return PHY_INTERFACE_MODE_SGMII;
 
 	if (phylink_test(link_modes, 1000baseX_Full))
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1424,18 +1424,7 @@ static void sfp_sm_fault(struct sfp *sfp
 
 static void sfp_sm_probe_for_phy(struct sfp *sfp)
 {
-	/* Setting the serdes link mode is guesswork: there's no
-	 * field in the EEPROM which indicates what mode should
-	 * be used.
-	 *
-	 * If it's a gigabit-only fiber module, it probably does
-	 * not have a PHY, so switch to 802.3z negotiation mode.
-	 * Otherwise, switch to SGMII mode (which is required to
-	 * support non-gigabit speeds) and probe for a PHY.
-	 */
-	if (sfp->id.base.e1000_base_t ||
-	    sfp->id.base.e100_base_lx ||
-	    sfp->id.base.e100_base_fx)
+	if (sfp->id.base.e1000_base_t)
 		sfp_sm_probe_phy(sfp);
 }