950-0543-drm-vc4-handle-the-case-where-there-are-no-available.patch

From dd99aa50a3ea7f7fe1ddfd59b1a2e969c744b8a0 Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.org>
Date: Tue, 28 May 2019 13:56:06 +0100
Subject: [PATCH] drm: vc4: handle the case where there are no
 available displays

It's reasonable for the firmware to return zero as the number of
attached displays. Handle this case as otherwise drm thinks that
the DSI panel is attached, which is nonsense.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
---
 drivers/gpu/drm/vc4/vc4_firmware_kms.c | 32 +++++++++++++++-----------
 1 file changed, 18 insertions(+), 14 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c
@@ -1309,13 +1309,13 @@ static int vc4_fkms_bind(struct device *
 				    RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS,
 				    &num_displays, sizeof(u32));
 
-	/* If we fail to get the number of displays, or it returns 0, then
+	/* If we fail to get the number of displays, then
 	 * assume old firmware that doesn't have the mailbox call, so just
 	 * set one display
 	 */
-	if (ret || num_displays == 0) {
+	if (ret) {
 		num_displays = 1;
-		DRM_WARN("Unable to determine number of displays's. Assuming 1\n");
+		DRM_WARN("Unable to determine number of displays - assuming 1\n");
 		ret = 0;
 	}
 
@@ -1344,17 +1344,21 @@ static int vc4_fkms_bind(struct device *
 				  display_num);
 	}
 
-	/* Map the SMI interrupt reg */
-	crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0);
-	if (IS_ERR(crtc_list[0]->regs))
-		DRM_ERROR("Oh dear, failed to map registers\n");
-
-	writel(0, crtc_list[0]->regs + SMICS);
-	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
-			       vc4_crtc_irq_handler, 0, "vc4 firmware kms",
-			       crtc_list);
-	if (ret)
-		DRM_ERROR("Oh dear, failed to register IRQ\n");
+	if (num_displays > 0) {
+		/* Map the SMI interrupt reg */
+		crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0);
+		if (IS_ERR(crtc_list[0]->regs))
+			DRM_ERROR("Oh dear, failed to map registers\n");
+
+		writel(0, crtc_list[0]->regs + SMICS);
+		ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
+				       vc4_crtc_irq_handler, 0,
+				       "vc4 firmware kms", crtc_list);
+		if (ret)
+			DRM_ERROR("Oh dear, failed to register IRQ\n");
+	} else {
+		DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n");
+	}
 
 	platform_set_drvdata(pdev, crtc_list);